Sanyo VCC-XZ600 Manual


Læs gratis den danske manual til Sanyo VCC-XZ600 (52 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Sanyo VCC-XZ600, eller vil du spørge andre brugere om produktet?

Side 1/52
INSTALLATION MANUAL
Color CCD Camera
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED
SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL
CODES.
Please read this installation manual carefully in order to ensure correct installation. In addition,
be sure to read carefully the electronic manual contained in the CD-ROM to ensure correct
operation of the camera.
Contents
Information To User. . . . . . . . . . . . . . . . . . . . 1
Installation method . . . . . . . . . . . . . . . . . . . . 3
Checking the menus and zoom position
using simple monitor output . . . . . . . . . . . . 5
Desiccant for preventing humidity . . . . . . . 6
Connections. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
How to Perform the Settings in the Menu
Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Learning the Menu Setting Operations . . . 12
Using the Electronic Manual (CD-ROM) . . 14
Main specifications . . . . . . . . . . . . . . . . . . . 15
(Inserted at the end of this manual)
Pattern Sheet
Accessories
Dimensions . . . . . . . . . . . . . . . . . . Back page
Installation examples
(When installing to a ceiling)
(When installing to a wall)
VCC-XZ600
EnglishFrançaisEspañol
1
Information To User
Precautions
In case of a problem
Do not use the unit if smoke or a strange odor
comes from the unit, or if it seems not to function
correctly. Turn off the power immediately and
disconnect the power cord, and then consult your
dealer or an Authorized Sanyo Service Center.
Do not open or modify
Do not open the cabinet, as it may be dangerous
and cause damage to the unit. For repairs,
consult your dealer or an Authorized Sanyo
Service Center.
Do not put objects inside the unit
Make sure that no metal objects or flammable
substance get inside the unit. If used with a
foreign object inside, it could cause a fire, a
short-circuit or damage. Be careful to protect the
unit from rain, sea water, etc. If water or liquid
gets inside the unit, turn off the power
immediately and disconnect the power cord, and
then consult your dealer or an Authorized Sanyo
Service Center.
Be careful when handling the unit
To prevent damage, do not drop the unit or
subject it to strong shock or vibration.
Do not install this unit close to magnetic
fields
The magnetic fields may result in unstable
operation.
Protect from humidity and dust
To prevent damage, do not install the unit where
there is greasy smoke or steam, where the
humidity may get too high, or where there is a lot
of dust.
Protect from high temperatures
Do not install close to stoves, or other heat
sources, such as spotlights, etc., or where it could
be subject to direct sunlight, as this could cause
deformation, discoloration or other damage.
Be careful when installing close to the ceiling, in
a kitchen or boiler room, as the temperature may
rise to high levels.
Cleaning
Dirt can be removed from the cabinet by wiping
it with a soft cloth. To remove stains, wipe with
a soft cloth moistened with a soft detergent
solution and wrung dry, then dry by wiping with
a soft cloth.
Do not use benzine, thinner or other chemical
products on the cabinet, as this may cause
deformation and paint peeling. Before using a
chemical cloth, make sure to read all
accompanying instructions. Make sure that no
plastic or rubber material comes into contact
with the cabinet for a long period of time, as
this may cause damage or paint peeling.
Approvals: IP66/CE
This unit has been certified to IP66 standards
when properly installed.
Use only an IP66 certified enclosure or an
electrical box.
Ensure all openings in enclosure are sealed as
per manufacturer's instructions.
Be sure to observe the
following
Be extremely careful when carrying out
work such as drilling holes in order to install
this camera. In addition, pull out cables
such as the power cable and video cable so
that they can be easily routed.
When installing the camera, take proper
steps to ensure that the ceiling or wall is
waterproof.
Select a ceiling or wall surface which is flat
and durable and which can support the full
weight of the camera. If installing to a
curved surface or a round pole or similar,
use a commercially-available mounting
bracket to install the camera.
Install the camera in a place where the
ambient temperature (with power source
connected) is within -20°C - 50°C.
(Condensation should not form.)
If direct sunlight will shine onto the camera,
install the accessory sunshade.


Produkt Specifikationer

Mærke: Sanyo
Kategori: Overvågningskamera
Model: VCC-XZ600

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanyo VCC-XZ600 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Overvågningskamera Sanyo Manualer

Sanyo

Sanyo VDC-HD3500P Manual

29 Marts 2024
Sanyo

Sanyo VCC-MC600P Manual

22 November 2022
Sanyo

Sanyo VCC-XZ600 Manual

1 November 2022
Sanyo

Sanyo VDC-C1575VP Manual

14 Oktober 2022
Sanyo

Sanyo VCC-MC800P Manual

6 Oktober 2022

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer