Sanyo Xacti VPC-E6GX Manual

Sanyo Kamera Xacti VPC-E6GX

Læs nedenfor 📖 manual på dansk for Sanyo Xacti VPC-E6GX (185 sider) i kategorien Kamera. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/185
VPC-E6EX
VPC-E6
VPC-E6GX
INSTRUCTION MANUAL
Digital Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-E6EX, VPC-E6 and
VPC-E6GX.
Any information regarding only one of these products will be labeled as such.
iEnglish
Warning
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of
California (USA):
WARNING:
This product contains chemicals, including lead, known to the State of
California to cause cancer, and birth defects or other reproductive harm.
Wash hands after handling.
iThis equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
hReorient or relocate the receiving antenna.
hIncrease the separation between the equipment and receiver.
hConnect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
hConsult the dealer or an experienced radio/TV technician for help.
iChanges or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Model number: VPC-E6
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Declaration of Conformity
iii English
GETTING UP AND RUNNING
Install the battery pack
1 Open the battery slot cover, and insert the battery pack.
hThe battery slot cover is located on the bottom of the camera.
2 Use the supplied AC adaptor to charge the battery pack.
hCharging will take approximately 90 minutes.
Battery/card cover Battery pack
(+) (–) mark
Multi-indicator
During recharging:
Lights red
Charging complete:
OFF
To power outlet
DC IN terminal
Supplied AC adaptor
Supplied power cord
Camera
English iv
Shooting
k
k
k
kkStill image photography
1 Press the ON/OFF button to turn the
camera on.
hThe Still Image Shooting Screen
appears.
2 Press the shutter button.
hThe image is captured.
k
k
k
kkVideo clip recording
1 Press the ON/OFF button to turn the
camera on.
2 Press the MENU button, and toggle
the SET button to the right.
hThe camera changes to the video
clip recording mode.
3 Press the MENU button.
4 Press the shutter button.
hRecording begins.
hTo stop recording, press the shutter
button again.
hPress the MENU button, toggle the
SET button to the left, and press
the MENU button. The camera
changes to the still image shooting
mode.
MOVIE
ON/OFF button
Shutter button
MENU button
SET button
3English
Shooting/recording
Change the color of
the images
“FILTERS”
(monochrome filter/
sepia filter) on page 52
Make white appear
natural
“WHITE BALANCE” on
page 79
Add an audio track to still image data
“ADDING A VOICE MEMO” on page 82
“ADDING/DELETING A VOICE MEMO” on page 97
Create a schedule from a captured still
image
“Making a schedule shot” on page 73
Playback
Getting started
viewing images
“Playing back the video
clip” on page 39
Adjust the speaker volume
“PLAYBACK VOLUME” on page 91
“Viewing still images”
on page 35
Search for image/
audio data
9-image/36-image
display playback on
page 36
Magnify an image
“Magnifying (zooming
in) the image” on
page 37
Check the focus
status
“ZOOM JUMP
PLAYBACK” on
page 92
Change the angle of
view
“ROTATE IMAGE” on
page 100
“Playing back audio
recordings” on page 66
Adjust the speaker volume
“PLAYBACK VOLUME” on page 91
Slideshow playback
“SLIDESHOW PLAYBACK” on page 111
Adjust the LCD monitor brightness
“LCD MONITOR BRIGHTNESS” on page 125
Playback on a TV
“CONNECTING TO A TV” (for playback) on
page 140
Set the TV system
“TV SYSTEM
SETTING” on page 127
Basic operation Convenient
functions Additional functions
9English
CHECKING THE INCLUDED ACCESSORIES
i
i
i
ii i
i
i
iiHandstrap: 1 SANYO Software Pack
(CD-ROM): 1
i
i
i
ii i
i
i
iiLi-ion battery pack: 1
Dedicated AV interface cable: 1
i
i
i
ii
Dedicated
USB interface
cable: 1
i
i
i
ii AC adaptor and power cord: 1
i
i
i
ii “SAFETY MANUAL”
(safety precautions booklet)
Please read this booklet
carefully before using the
digital camera.
i
i
i
ii Quick Guide
15 English
PARTS NAMES
Rear
Bottom
DC IN terminal
Zoom switch
Playback
button [H]
LCD monitor
SET button
Tripod stand hole
Battery/card cover
ON/OFF button
Strap holder
Multi-indicator
Shutter button
USB/AV terminal
MENU button
17 English
INSTALLING THE CARD
When removing the card...
hTo remove the card, press it down, and then release. The card will
protrude slightly, and you can then pull it out.
CAUTION
iDo not attempt to forcibly remove the card.
iNever remove the card when the multi-indicator is flashing red quickly. In
doing so, you risk losing the data stored in the card.
HINT
Shooting without a card installed
iThe camera has a 16MB internal memory that lets you photograph and
playback images even when there is no card installed. When the camera is
turned on with no card installed, the internal memory icon is shown on
the LCD monitor to let you know that the images you capture will be saved
to the cameras internal memory.
2Press and release
1Open
3Pull out
25 English
DATE AND TIME SETTING
hIf “DISP OFF” is selected, the date the image was captured is not
shown during playback.
4Press the SET button.
8 Select “EXIT”, and press the SET button.
hThe date and time setting is completed, and you are returned to the
Option Screen.
hTo return to the Shooting Screen, press the MENU button.
HINT
iUnder normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for about 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 4).
To correct the date and time settings
iAfter steps 1 4 and , select the line of the setting that you want to change,
press the SET button, and follow the steps in the respective paragraphs
above to change the setting.
English 28
BEFORE TAKING PICTURES
How to hold the camera
Hold the camera securely, keeping your elbows close to your body and
making sure the camera is stable.
Make sure that the lens and flash are not blocked by your fingers or the
handstrap.
HINT
i Images captured in the still image shooting mode can be rotated when
they are played back (page 100).
i When the optical zoom is used or when the autofocus is operating, the
image may appear to waver, but this is not a malfunction.
About the touch sensor (touch focus)
With the touch sensor, the image is focused simply by a light finger-touch on
the shutter button (focus lock). With the subject in focus, just gently press the
shutter button to take the picture for a perfectly focused image.
At the same time, the touch sensor is temporarily deactivated whenever the
Mode Select Screen (page 31) or Shooting Setting Screen is displayed,
thereby facilitating operation of these screens.
Furthermore, you can also deactivate the touch sensor so that the autofocus
operates only when you press the shutter button halfway (page 63).
A finger is blocking the
lens or flash.
Correct hold Incorrect hold
English 30
i
i
i
ii Fast-moving subjects
Use the focus-lock function to lock the
focus on an object at the same distance as
the desired subject, then reposition the
camera to compose the picture.


Produkt Specifikationer

Mærke: Sanyo
Kategori: Kamera
Model: Xacti VPC-E6GX

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanyo Xacti VPC-E6GX stil et spørgsmål nedenfor, og andre brugere vil svare dig




Kamera Sanyo Manualer

Kamera Manualer

Nyeste Kamera Manualer