Saris Traps Single Track Manual

Saris Ikke kategoriseret Traps Single Track

Læs gratis den danske manual til Saris Traps Single Track (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Saris Traps Single Track, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Single Track /Triple Track #TRK14 #TRK33/34

Assembly Instructions | Instrucciones de montaje | Instructions d’assemblage

Determine location to mount TRACK, making sure that when bike is mounted in carrier, the handlebars, levers or bar-ends do not contact anything. If mounting in the bed of

a pick up, TRACK can be mounted to either the front wall of the bed or the ﬂoor of the bed. The TRACK is typically mounted with the TRACKS sticker in an upright, readable

position (note above illustration)

P L E A S E R E A D A N D F O L L O W A L L I N S T R U C T I O N S C A R E F U L LY

STEP 1. TRACK PLACEMENT

Single Track #TRK14

Triple Track #TRK33/34

Once you have determined where to mount carrier, mark location of center hole in track. Using a 1/4’’ drill bit, drill out center hole. To secure carrier insert ﬂat head screw

through TRACK and then drilled out hole. If mounting to the front wall of the bed, it may be necessary to tape washer & locking nut to the box end of a wrench, due to not having

enough room to access the threads of the screw. Once you have secured washer & locking nut, align track parallel to the bed and drill remaining 2 mounting holes and secure

with remaining hardware.

STEP 2. MOUNTING TRACK

Note: Traps and Track mounting hardware not included.

PARTS LIST (FOR MOUNTING SARIS TRAPS)

3-Flat Socket Head Cap Screw 1/4-20x1’’

3-Flat Washer 1/4’’

3-Nylock Nut 1/4-20’’er

PARTS LIST (FOR MOUNTING SARIS TRAPS)

3-Flat Socket Head Cap Screw 1/4-20x1’’

3-Flat Washer 1/4’’

3-Nylock Nut 1/4-20’’er

CAUTION

If permanently securing, carrier’s attachment is critical and beyond the control of the manufacturer. Saris has no control over the mounting of the TRACK and as such can not

assume responsibility for any damages to your vehicle. The following instructions are meant to be guidelines for attachment. It is the end users responsibility to insure a secure

installation. Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the

incorrect attachment, improper use, inadequate maintenance, or neglect of this carrier.

WARRANTY

We warrant this product to the ﬁrst consumer to be free from defect in material and workmanship for a period of one year from date of purchase. (Please retain your sales slip for

your records.) Any product or part thereof found to be defective within that period will be replaced without charge provided that: (1) the product was not misused; (2) no alterations

or modiﬁcations were made; (3) its failure resulted from a defect in material or workmanship and not from normal wear expected in the use of the product; (4) the product or part is