Sauermann HD 50 Manual

Sauermann Måling HD 50

Læs gratis den danske manual til Sauermann HD 50 (12 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Sauermann HD 50, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
CLASS 50 PORTABLES
Quick Start Guide
EN FR ES
CO 50, CT 50, HD 50, HM 50, LV 50, LX 50, MP 50, MP 51, MP 55, VT 50
ZH
sauermanngroup.com
Kimo, a Sauermann brand.
Register your product online
and benet from the full
Sauermann range.
English
Quick Start Guide
Class 50 portables
2. Take a measurement
Switch on the instrument by pressing briey on .“On/Off/Hold”
The instrument displays its name then the measurement.
VT 50: before using the instrument with the
hotwire probe, please lower the protection
tube (1) of the sensing element.
VT 50: always use the hotwire probe with
the red point in front of ow.
CO 50: the instrument displays its name then a 5 second countdown. This count corresponds to the preheating
time of the sensor. At the end of the countdown, the measured value of CO is displayed.
MP 50, MP 51: the instrument displays its name then an autozero is performed. At the end of the autozero, the
measured value displays.
Press briey on to switch measurement parameter display.“Select”
MP 50, MP 51, MP 55: “Select”press briey and successively on to change the unit.
• Available units for MP 50: Pa, mmH
2
0, inWg, daPa.
• Available units for MP 51: mmH
2
0, kPa, in Wg, mbar, mmHg, daPa.
• Available units for MP 55: mbar, mmHg, hPa.
HM 50: “Select”press briey on to select a type of material.
Press the spikes in the material to be measured.
When a measurement is over-range, above the maximum range, the value ashes.
Below the minimum range, the value is no more measurable and the device indicates "---", it means that for:
• Wood type 1: the measurement is < than 10%
• Wood type 2: the measurement is < than 9%
• Plaster, brick and concrete: the measurement is < than 0.1%
1. Keys
Select
On/Off/Hold
Sensing
element
(temperature)
Sensing
element
(velocity)
Airow direction
Protection tube
of the sensing
element (1)
Redpoint: landmark
Bottom of the
hotwire probe
4. Hold the measurement
During measurement, press briey on “On/Off/Hold” to hold measurement: “Hold” appears on the screen and
measurements are xed.
During measurement:
Remove pressure tubes. Carry out a long press on “Select”.
The instrument makes an autozero then returns to the measurement display.
3. Carry out a manual autozero (MP 50, MP 51)
CO 50, HD 50, HM 50, LX 50, MP 55, VT 50: press briey on “Select” to move from one parameter to the other.
Press again briey on to exit the Hold function.“On/Off/Hold”
These portable instruments are used to measure the following parameters: temperature, relative humidity, CO, pressure,
air velocity and light.
1. Operating temperature, protection of the instruments and information about storage
Conditions of use (°C/%RH/m): from 0 to +50 °C. In non-condensing conditions. From 0 to 2000 m.
Protection: IP54
Storage temperature: HD 50, LX 50: from -20 to +70 °C. CT 50, CO 50, HM 50, LV 50, MP 50, MP 51, MP 55, VT 50: from -20 to +80 °C.
If the instrument is stored outside the operating temperature (for example in a van, a warehouse...), please wait for 10
minutes in its operating temperature before start using it.

Produkt Specifikationer

Mærke: Sauermann
Kategori: Måling
Model: HD 50

Har du brug for hjælp?

Hvis du har brug for hjælp til Sauermann HD 50 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Måling Sauermann Manualer

Sauermann

Sauermann TK 61 Manual

14 August 2025
Sauermann

Sauermann KT 50 Manual

14 August 2025
Sauermann

Sauermann GP 500-1 Manual

14 August 2025
Sauermann

Sauermann HD 110 Manual

13 August 2025
Sauermann

Sauermann VT 110 Manual

13 August 2025
Sauermann

Sauermann GP 500-2 Manual

13 August 2025
Sauermann

Sauermann KIRAY 100 Manual

13 August 2025
Sauermann

Sauermann HD 50 Manual

13 August 2025
Sauermann

Sauermann Si-VV3 Manual

13 August 2025
Sauermann

Sauermann MP 112 Manual

13 August 2025

Måling Manualer

Nyeste Måling Manualer

Voltcraft

Voltcraft OM-100 Manual

14 August 2025
Voltcraft

Voltcraft DSO-3104 Manual

14 August 2025
Voltcraft

Voltcraft DSO-2074G Manual

14 August 2025
Voltcraft

Voltcraft VC-BT12/24-Print Manual

14 August 2025
Voltcraft

Voltcraft WBP-80 Manual

14 August 2025
Voltcraft

Voltcraft MS-229 LCD Manual

14 August 2025
Voltcraft

Voltcraft RE395C Manual

14 August 2025
Voltcraft

Voltcraft 1070D Manual

14 August 2025
Voltcraft

Voltcraft DSO-2020 USB Manual

14 August 2025
Voltcraft

Voltcraft MF-80 Manual

14 August 2025