Sauermann KT 50 Manual

Sauermann Måling KT 50

Læs gratis den danske manual til Sauermann KT 50 (2 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Sauermann KT 50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Conguration and data viewing

software freely downloadable

KT 50 - KH 50

KISTOCK Data logger

or HVAC - Temperature, Humidity

Conguration and data processing

software available as option

16,000 measurement points

Measure up to 2 parameters

• 2 congurable setpoint alarms

• 1 line LCD display

• Fast data download (1,000 values/second)

• IP65 (KT 50) and IP20 (KH 50) housing

DATA SHEET

KT 50 KH 50

Units displayed °C, °F °C, °F, %RH

Resolution 0.1 °C, 0.1 °F 0.1 °C, 0.1 °F, 0.1 %RH

External inputs Micro-USB connector

Internal sensor Temperature Humidity, temperature

Setpoints alarm 2 setpoint alarms on each channel

Frequency of measurement From 1 minute to 24 hours

Operating temperature

(1)

From -40 to +70 °C

-40 to +158 °F

From -20 to +70 °C

-4 to +158 °F

Storage temperature From -20 to +50 °C / -4 to +122 °F

Battery life 500 days

(2)

365 days

(2)

Standards

2014/30/EU EMC; 2014/35/EU Low Voltage;

2011/65/EU RoHS II; 2012/19/EU WEEE;

FCC part 15; UL 61010

General features

Magnetic

mounting

(1)

The screen can be hard to read, and its display speed often slows down at temperatures lower than 0 °C / 32 °F. This has no effect on the accuracy of measurements.

(2)

Non-contractual value. Based on 1 measurement each 15 minutes at 25 °C / 77 °F. A correct operation of the device and the storage conditions must be respected.

°C

°F

Housing

Dimensions 61.3 x 40 x 21.9 mm / 2

’’ x 1

’’ x

’’

Weight 40 g / 1.42 oz

Display

1 line LCD screen

Screen dimensions: 26.5 x 22.5 mm / 1

‘‘ x

’’

Control 1 OK key

Material

Compatible with food industry environment

ABS housing. Caps made of Elastomer

Protection rating IP65: KT 50. IP20: KH 50

PC communication 1 micro USB input

Battery power supply 2 x CR2032 (lithium 3 V)

Environmental

conditions of use

Hygrometry: in non-condensing condition

Maximum altitude: 2000 m / 2188 yd

Air and neutral gases

KT 50 TemperatureInternal sensor

Type of sensor NTC

Measuring range From -40 to +70 °C / -40 to +158 °F

Accuracy*

±0.4 °C from -20 to 70 °C ±0.8°C below -20 °C

±0.8 °F from -4 to 158 °F ±1.5 °F below -4 °F

Technical specications

* All accuracies indicated in this document were stated in laboratory conditions and can be guaranteed for

measurements carried out in the same conditions, or carried out with calibration compensation.

** Factory calibration uncertainty: ±0.88 %RH. Temperature dependence: ±0.04 x (T-20) %HR if T<15 °C or T>

25 °C / ±0.04 x [((T°F - 32) x 5/9) -20] %RH (if T<59°F or T>77°F).

KH 50 Hygrometry TemperatureThermo-hygrometer

Type of sensor Capacitive NTC

Measuring range From 0 to 100% RH

From -20 to +70 °C

-4 to 158 °F

Accuracy*

±2.5 %RH (from +15

to +25°C / +59 to

+77 °F from 5 to 95

%RH)**

±0.4 °C from 0 to +50 °C

±0.8 °F from +32 to +122 °F

±0.8 °C below 0 °C or

above +50 °C

±1.5 °F below 32 °F or

above 122 °F

EN 12830

KT 50

DS_EN – KT 50 - KH 50 – 20/03/2025 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.

Dimensions

40 mm / 1 9/16’’

60 mm / 2 23/64’’

Maintenance: Avoid using aggressive solvents.

Protect the device from cleaning products containing

formaldehyde, which may be used for room and duct

cleaning.

Precautions for use: Always use the device as intended

and within the specied technical parameters to maintain its

protective features.

Only use the accessories

provided with the device.

Accessories

• 2 CR2032 batteries pack. Ref. P2-50

• Data collector: collects up to 20,000,000

points from one or several KISTOCK directly

on-site. Results restitution on PC of realised

datasets. Ref: KNT-320

Connections

PC connection input

Micro-USB connector

EN12830 STANDARD

KT 50 models dedicated to food industry, meet with requirements

of EN 12830 norm. This certication is required for transportation,

storage and distribution of refrigerated, frozen and deep-frozen

food, and ice cream Certication is done by an independent

laboratory, COFRAC accredited.

Recorder functions

The KISTOCK records measured values instantly and logs data at

predened intervals. Additionally, continuous operation is possible

with loop recording.

3 types of dataset start

The measurement dataset can be launched:

• With a delayed start (with predened date and time)

• With the software

• With push-button

6 types of dataset stop

You can stop your dataset:

• According to a date and time (if it was started the same way)

• According to a recording duration

• According to a predened number of recording points

• If the storage capacity of the memory is full

• With “Stop” option of the software

• By holding “OK” key during about 5 seconds, if this function has

been previously activated by the software.

Software Mounting

Freely downloadable software on sauermanngroup.com

KILOG Lite software allows to congure the data logger, to

view data and to save data in PDF le.

Conguration and data processing software

KILOG software allows you to congure, save

and process your data in a very simple way.

• Software only: ref. KILOG-3-N

• Complete set: software + 1 interface. Ref. KIC3-N

1. Necklace for anti-theft

2. Batteries cover

3. Magnetic xing

4. Locking sign of the batteries cover

USB-micro USB cable: CK50

This cable allows you to connect your KISTOCK

to your PC.

Replace the batteries

With 500 days* battery life, KISTOCK ensure long-term

measurements. To change the batteries:

• Unlock the battery cover with a screwdriver or a coin.

• Put the 2 batteries superimposing them (3 V CR2032 button

batteries) with the + pole visible.

• Put back the batteries cover: the sign of the batteries cover must

be placed in front of the opened padlock.

• Turn right the batteries cover: the sign on the batteries cover

must be placed in front of the closed padlock.

Display

°C: Temperature in degrees Celsius

°F: Temperature in degrees Fahrenheit

%RH: Relative humidity (KH 50)

Dataset is nished

Records the values at the moment when this indicator appears / ashing: the dataset has not yet started

Slow ashing: dataset is taking between 80 and 90% of storage capacity

Fast ashing: dataset is taking 90-100% of storage capacity

Constant: storage capacity lled up

Displayed values correspond to maximum and minimum values of the channels

Alarm action type: rising or

falling action

Flashing on the screen + ashing of LEDs:

means that the battery must be changed

BE CAREFUL! Material damages can happen. Please follow the recommended precautions.

*For a KT 50. Non-contractual value. Based on 1 measurement each 15 minutes

at 25 °C / 77 °F. A correct operation of the device and the storage conditions must

be respected.

KISTOCK can be mounted in different ways, you can also move it or

install it very easily.

• Magnetic mounting (see photo)

Calibration

KISTOCK data loggers can be supplied with an optional calibration certicate.

21.5 mm

27/32’’

sauermanngroup.com

Kimo, a Sauermann brand.

Produkt Specifikationer

Mærke:	Sauermann
Kategori:	Måling
Model:	KT 50

Har du brug for hjælp?

Hvis du har brug for hjælp til Sauermann KT 50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Sauermann Manualer

Sauermann TK 61 Manual

14 August 2025

Sauermann KT 50 Manual

14 August 2025

Sauermann GP 500-1 Manual

14 August 2025

Sauermann HD 110 Manual

13 August 2025

Sauermann VT 110 Manual

13 August 2025

Sauermann GP 500-2 Manual

13 August 2025

Sauermann KIRAY 100 Manual

13 August 2025

Sauermann HD 50 Manual

13 August 2025

Sauermann Si-VV3 Manual

13 August 2025

Sauermann MP 112 Manual

13 August 2025

Måling Manualer

Nyeste Måling Manualer

Voltcraft MF-80 Manual

14 August 2025

Voltcraft OFT-01 Manual

14 August 2025

Voltcraft AO 610 Manual

14 August 2025

Voltcraft PM-22 Manual

14 August 2025

Voltcraft DSO-3204 Manual

14 August 2025

Voltcraft KBM-110 Manual

14 August 2025

Voltcraft PM-32 Manual

14 August 2025

Voltcraft DO-410 Manual

14 August 2025

Voltcraft BT-12DIG Manual

14 August 2025

Mitsubishi SRK63ZTLH-WF Manual

14 August 2025