Sauermann LV 117 Manual

Sauermann Måling LV 117

Læs gratis den danske manual til Sauermann LV 117 (7 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Sauermann LV 117, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Quick Start Guide

CLASS 110 PORTABLES

AQ 110, CO 110, CT 110, HD 110, LV 110-111-117, LV 130,

MP 110-111-115-112, MP 120, MP 130, VT 110-115

www.sauermanngroup.com

EN FR ES DE ZH

English

Quick Start Guide

Class 110 portables

3. Take a measurement

VT 110: before using the instrument with the hotwire probe, please lower the protection tube (1) of the

sensing element.

VT 110: always use the hotwire probe with the red point (VT 110) or white point (VT 115) in front of ow.

2. Keys

These portable instruments are used to measure the following parameters: temperature, relative humidity, pressure,

airow and air velocity, CO and CO

1. Operating temperature, protection of the instruments and information about storage

Conditions of use (°C/%RH/m): from 0 to +50 °C / 32 to +122 °F (AQ 110 / CO 110 / CT 110 / LV 110-111-117 / LV 130 /

MP 110-111-115-112 / MP 120 / MP 130 / VT 110-115); from -10 to 50 °C / 14 to +122 °F (HD 110).

In non-condensing conditions. From 0 to 2000 m / 0 to 2188 yd.

Protection: IP54

Storage temperature: from -20 to +80 °C / -4 to +176 °F.

If the instrument is stored outside the operating temperature (for example in a van, a warehouse...), please wait for 10

minutes in its operating temperature before start using it.

KEY FUNCTION

ON-OFF/Esc. Turn the instrument on/off and allow to back to previous selection.

OK key. Conrm selection

Select key. Navigate throught the menu

HOLD/min/max key. Hold value, and display minimum and maximum values

Backlight key. Activate/Deactivate the backlight

Sensing

element

(temperature)

Sensing

element

(velocity)

Airow direction

Protection tube

of the sensing

element (1)

Redpoint: landmark

Bottom of the

hotwire probe

Sensing

element

(temperature)

Sensing

element

(velocity)

Airow direction

Protection tube

of the sensing

element (1)

White point:

landmark

Bottom of the

hotwire probe

VT 110 VT 115

Switch on the instrument by pressing briey on .“On/Off/Esc”

During start-up, carry out a long press simultaneously on and ”On/Off/Esc” “Select“.

Select the required language (English, French) with Validate pressing “Select“ key. “OK”.

3. Select the language of the device

Produkt Specifikationer

Mærke:	Sauermann
Kategori:	Måling
Model:	LV 117

Har du brug for hjælp?

Hvis du har brug for hjælp til Sauermann LV 117 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Sauermann Manualer

Sauermann LV 117 Manual

14 August 2025

Sauermann TK 61 Manual

14 August 2025

Sauermann KT 50 Manual

14 August 2025

Sauermann GP 500-1 Manual

14 August 2025

Sauermann HD 110 Manual

13 August 2025

Sauermann VT 110 Manual

13 August 2025

Sauermann GP 500-2 Manual

13 August 2025

Sauermann KIRAY 100 Manual

13 August 2025

Sauermann HD 50 Manual

13 August 2025

Sauermann Si-VV3 Manual

13 August 2025

Måling Manualer

Nyeste Måling Manualer

Voltcraft RE395D Manual

14 August 2025

Voltcraft DSO-6204F Manual

14 August 2025

Voltcraft OM-100 Manual

14 August 2025

Voltcraft DSO-3104 Manual

14 August 2025

Voltcraft DSO-2074G Manual

14 August 2025

Voltcraft VC-BT12/24-Print Manual

14 August 2025

Voltcraft WBP-80 Manual

14 August 2025

Voltcraft MS-229 LCD Manual

14 August 2025

Voltcraft RE395C Manual

14 August 2025

Voltcraft 1070D Manual

14 August 2025