Sauermann MP 130 Manual

Sauermann Måling MP 130

Læs gratis den danske manual til Sauermann MP 130 (7 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Sauermann MP 130, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Quick Start Guide

CLASS 110 PORTABLES

AQ 110, CO 110, CT 110, HD 110, LV 110-111-117, LV 130,

MP 110-111-115-112, MP 120, MP 130, VT 110-115

www.sauermanngroup.com

EN FR ES DE ZH

English

Quick Start Guide

Class 110 portables

3. Take a measurement

VT 110: before using the instrument with the hotwire probe, please lower the protection tube (1) of the

sensing element.

VT 110: always use the hotwire probe with the red point (VT 110) or white point (VT 115) in front of ow.

2. Keys

These portable instruments are used to measure the following parameters: temperature, relative humidity, pressure,

airow and air velocity, CO and CO

1. Operating temperature, protection of the instruments and information about storage

Conditions of use (°C/%RH/m): from 0 to +50 °C / 32 to +122 °F (AQ 110 / CO 110 / CT 110 / LV 110-111-117 / LV 130 /

MP 110-111-115-112 / MP 120 / MP 130 / VT 110-115); from -10 to 50 °C / 14 to +122 °F (HD 110).

In non-condensing conditions. From 0 to 2000 m / 0 to 2188 yd.

Protection: IP54

Storage temperature: from -20 to +80 °C / -4 to +176 °F.

If the instrument is stored outside the operating temperature (for example in a van, a warehouse...), please wait for 10

minutes in its operating temperature before start using it.

KEY FUNCTION

ON-OFF/Esc. Turn the instrument on/off and allow to back to previous selection.

OK key. Conrm selection

Select key. Navigate throught the menu

HOLD/min/max key. Hold value, and display minimum and maximum values

Backlight key. Activate/Deactivate the backlight

Sensing

element

(temperature)

Sensing

element

(velocity)

Airow direction

Protection tube

of the sensing

element (1)

Redpoint: landmark

Bottom of the

hotwire probe

Sensing

element

(temperature)

Sensing

element

(velocity)

Airow direction

Protection tube

of the sensing

element (1)

White point:

landmark

Bottom of the

hotwire probe

VT 110 VT 115

Switch on the instrument by pressing briey on .“On/Off/Esc”

During start-up, carry out a long press simultaneously on and ”On/Off/Esc” “Select“.

Select the required language (English, French) with Validate pressing “Select“ key. “OK”.

3. Select the language of the device

Produkt Specifikationer

Mærke:	Sauermann
Kategori:	Måling
Model:	MP 130

Har du brug for hjælp?

Hvis du har brug for hjælp til Sauermann MP 130 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Sauermann Manualer

Sauermann KCC 320 Manual

27 August 2025

Sauermann KH 50 Manual

27 August 2025

Sauermann MP 120L Manual

26 August 2025

Sauermann KT 120 Manual

26 August 2025

Sauermann MP 130 Manual

26 August 2025

Sauermann MP 51 Manual

26 August 2025

Sauermann MP 110 Manual

26 August 2025

Sauermann TR 62 Manual

26 August 2025

Sauermann VT 115 Manual

26 August 2025

Sauermann TR 61 Manual

26 August 2025

Måling Manualer

Nyeste Måling Manualer

Sonel EVSE-100 Manual

26 August 2025

Chauvin Arnoux C.A 6652 Manual

26 August 2025

Oricom TPMC-2E Manual

26 August 2025

YSI EXO3s Manual

26 August 2025

Owon HDS2102A Manual

25 August 2025

PCE Instruments Series 930 Manual

25 August 2025

YSI Krytox Manual

25 August 2025

Vemer Energy-230 M50 Micro Manual

25 August 2025

YSI EXO3 Manual

25 August 2025

Vemer Energy-230 D80 Manual

25 August 2025