Sauter FA 200 Manual

Sauter Ikke kategoriseret FA 200

Læs gratis den danske manual til Sauter FA 200 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Sauter FA 200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Instruction Manual

JO, 05.07.2007 FA englisch.doc Page 1 of 3

SAUTER GmbH

Schumannstr. 33, D-72458 Albstadt

Tel: +49 (0) 7431 938 666

Albert-Sauter@sauter.eu

www.sauter.eu

Thank you for buying a SAUTER force gauge. We hope

you are pleased with your high quality force gauge with its

big functional range. If you have any queries, wishes or

helpful suggestions, do not hesitate to call our service

number.

1. Included in Delivery

- SAUTER FA

- Case

- Standard Attachments

2. Warning

2.1 Intended use

The instrument you have acquired serves to determine the

measuring value of the material to be measured. It is

intended to be used as a “non-automatic“ instrument, i.e.

the material to be measured is manually and carefully

attached at the instrument. The measuring value can be

read off after a stable measuring value has been obtained.

2.2 Inappropriate use

Do not use the instrument for dynamic measuring. In the

event that small quantities are removed or added to the

material to be

measured, incorrect measuring results can be displayed

due to the “stability compensation“ in the instrument.

(Example: Slow draining

off of liquid from a container suspended from the

instrument). Do not attach a continuous load. This can

damage the measuring

unit as well as the parts, relevant to safety.

Prevent jolts, torsion and oscillation (e.g. by appending

slopingly) of all kinds. Be sure to prevent overloading the

instrument in excess of the stated maximum load (max.),

minus any tare weight that may possibly exist. This could

damage the instrument (risk of breakage).

Important:

• Always make sure that there are no people or materials

below the load that could be injured or damaged!

• The instrument is not suitable for measuring people. Do

not use as baby scales!

• The instrument does not comply with the medical product

law (MPG).

Never operate the instrument in hazardous locations. The

series design is not explosion-proof. Structural alterations

may not be

made to the instrument. This can lead to incorrect

measuring results, faults concerning safety regulations as

well as to destruction

of the instrument. The instrument may only be used in

compliance with the described guidelines. Varying areas of

application/

planned use must be approved by SAUTER in writing.

2.3 Guarantee

The guarantee is not valid following

• non-observation of our guidelines in the operating

instructions

• use outside the described applications

• alteration to or opening of the device

Indicator Dial

Finger

Knob

Controller

Track /

Peak

Central Stick

Force

Direction

Force

Direction

Instruction Manual

JO, 05.07.2007 FA englisch.doc Page 2 of 3

SAUTER GmbH

Schumannstr. 33, D-72458 Albstadt

Tel: +49 (0) 7431 938 666

Albert-Sauter@sauter.eu

www.sauter.eu

• mechanical damage and damage caused by media,

liquids

• natural wear and tear

• inappropriate erection or electric installation

• overloading of the measuring equipment

2.4 Monitoring the test substances

The metrology features of the instrument and any possible

available adjusting weight must be checked at regular

intervals within the scope of quality assurance. For this

purpose, the answerable user must define a suitable

interval as well as the nature and scope of this check.

Information is available on

the home page (www.KERN-sohn.com) with regard to the

monitoring of instrument test substances and the test

weights required for this. Test weights and instruments can

be adjusted quickly and at a reasonable price in KERN’s

accredited DKD calibration laboratory (return to national

normal).

3. Fundamental safety information

Do not use the hanging instrument to transport loads.

Prevent jolts, torsion and oscillation (e.g. by appending

slopingly) of all kinds.

Never use the hanging instrument over the maximum

permitted weight (!!Danger of breaking!!).

Always make sure that there are no living beings or

materials below the load that could be injured or damaged.

The hanging electronic instruments from the SAUTER

instrument are only suitable for hand-held use or use in a

test stand.

They are not suitable for hanging from a mechanical hook,

e.g. a crane hook.

3.1 Observe the information in the operating instructions

Please read the operating instructions carefully before

erecting

and commissioning, even if you already have experience

with SAUTER instruments.

3.2 Staff training

The device may only be operated and looked after by

trained members of staff.

4. Transport and storage

4.1 Acceptance check

Please check the packaging immediately upon delivery

and the device during unpacking for any visible signs of

external damage.

4.2 Packaging

Please retain all parts of the original packaging in case it

should be necessary to return items at any time. Only the

original packaging should be used for return

consignments.

Before despatch, disconnect all attached cables and

loose/movable parts. Apply any

intended transport security

devices. Secure all parts, e.g. glass windshield, measuring

plate,

power unit etc., to prevent slipping and damage.

5. Unpacking, installation and commissioning

5.1 Place of installation, place of use

The instrument is constructed in such a way that reliable

measuring results can be achieved under normal

application conditions.

By selecting the correct application location for your

instrument, you will be able to work quickly and precisely.

Therefore please observe the following at the application

location:

• Avoid extreme heat as well as temperature fluctuation

caused by installing next to a radiator or in the direct

sunlight;

• Protect the instrument against direct draughts due to

open

windows and doors;

• Avoid jarring during measuring;

• Protect the instrument against high humidity, vapours

and dust;

• Do not expose the device to extreme dampness for

longer

periods of time. Inadmissible bedewing (condensation of

air

moisture on the device) can occur if a cold device is taken

into a significantly warmer environment. In this case,

please acclimatise the device for approx. 2 hours at room

temperature after it has been disconnected from the

batterys.

• Avoid static charging of the material to be measured,

measuring container and windshield.

Major display deviations (incorrect measuring results) are

possible if electromagnetic fields occur as well as due to

static

charging and instable power supply. It is then necessary to

change the location.

5.2 Unpacking

Carefully remove the instrument from its packaging,

remove the plastic wrapping and position the instrument in

its intended working

location.

3. Working Conditions

10°C to 30°C / 15% up to 80% humidity

4. Technical Specifications

Total Expansion of measuring unit at MAX: 10 mm

Produkt Specifikationer

Mærke:	Sauter
Kategori:	Ikke kategoriseret
Model:	FA 200

Har du brug for hjælp?

Hvis du har brug for hjælp til Sauter FA 200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sauter Manualer

Sauter ASU-01 Manual

8 Januar 2025

Sauter FH 500S71 Manual

8 Januar 2025

8 Januar 2025

11 August 2024

6 August 2024

6 August 2024

5 August 2024

3 August 2024

3 August 2024

3 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 304090 Manual

16 Juni 2025

Toorx SRX-85 Manual

16 Juni 2025

Cable Matters 180070 Manual

16 Juni 2025

Philips Avent SCD252 Manual

16 Juni 2025

Philips Q-Line 55BDL2050Q Manual

16 Juni 2025

EFX Delta DUDB4 Manual

16 Juni 2025

Foster Prep Station PS1000HR Manual

16 Juni 2025

OmniMount OBT60 Manual

16 Juni 2025

XO D34HPBF Manual

16 Juni 2025

Janitza 800-DI14 Manual

16 Juni 2025