Schneider SXWRCF16A10003 Manual

Schneider Måling SXWRCF16A10003

Læs gratis den danske manual til Schneider SXWRCF16A10003 (4 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Schneider SXWRCF16A10003, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Installation Sheet

02-40058-02-en,March 2022 |1

SpaceLogic™ RP-C230 V

Controller Models

Part numbers:SXWRCF16A10003 and SXWRCF16B10002

Regulatory Compliance and Safety Information

Electrical equipment should be installed,operated,serviced,and maintained only by qualified personnel.No responsibility is assumed by

Schneider Electric for any consequences arising out of the use of this material.

Carefully read these instructions and all information relevant for this product before trying to install it.See the list of technical literature.

The technical literature and declarations of conformity can be accessed on the Schneider Electric Exchange website,ecobuilding.schneider-

electric.com.Contact your local Schneider Electric sales office for a hard copy of the documentation or for additional information.

Technical Literature

• SpaceLogic Hardware Reference Guide, 04-XX001-XX-en

Recommended Installation Location

The controller is intended for fan coil,ceiling systems,and other applications.The controller is typically installed next to or inside the fan coil

equipment.The controller can be equipped with optional covers to reduce access to the screw terminals and wires.

Dimensions

Installation Orientation Restrictions Installing the Device on a DIN Rail

NOTICE

CONTROLLERCONTROLLER DAMAGEDAMAGE

Use the DIN rail end clip when you install the controller on a

vertical DIN rail.

FailureFailure toto followfollow thesethese instructionsinstructions cancan resultresult inin equipmentequipment

damage.damage.

02-40058-02-en,March 2022 |2

Installing the Device on a Flat Surface

Installing and Removing the Optional Covers

Connections

DANGER

HAZARDHAZARD OFOF ELECTRICELECTRIC SHOCK,SHOCK,EXPLOSION,EXPLOSION,OROR ARCARC FLASHFLASH

• Disconnect all line voltage connected to the controller and its relay outputs before working on the device.

• More than one disconnect switch may be required to de-energize this equipment before servicing.

• Connect only devices with safe extra low voltage equipment (SELV/PELV)inputs/outputs to the controller universal inputs/outputs.

FailureFailure toto followfollow thesethese instructionsinstructions willwill resultresult inin deathdeath oror seriousserious injury.injury.

Produkt Specifikationer

Mærke:	Schneider
Kategori:	Måling
Model:	SXWRCF16A10003
Bredde:	180 mm
Dybde:	64 mm
Højde:	110 mm
Vægt:	472 g
Pakkevægt:	800 g
Pakkedybde:	64 mm
Pakkebredde:	180 mm
Pakkehøjde:	110 mm