Segway Ninebot GT1 Manual

Segway Scooter Ninebot GT1

Læs nedenfor 📖 manual på dansk for Segway Ninebot GT1 (30 sider) i kategorien Scooter. Denne guide var nyttig for 30 personer og blev bedømt med 4.8 stjerner i gennemsnit af 15.5 brugere

Side 1/30
Product Manual
CE.00.0070.81-A
骑行前请务必下载并安装 Segway-Ninebot
APP,以激活您的滑板车。
如需了解更多信息,请登录 www.segway.com
赛格威有权对产品及其固件、说明书进行更新。
图片仅供参考,图片与实际产品可能不同,请以实际产品为准。
扫描二维码下载Segway-Ninebot
app
Diagram and Functions
Handlebar Functions
Handlebar
Stem
Rear Fender
Rear Disc Brake
Rear Hub Motor
Battery Pack
Kickstand
Rear Turn Signal
Rear Brake Lever
Left Turn Signal
Dashboard
Front Brake Lever
Headlight
Right Turn Signal
Quick Release Lever
Front Fork
Front Reflector
Front Shock
Absorber
Front Fender
Front Hub Motor
* For GT2 only
Front Wheel
Front Disc Brake
Folding Mechanism
Safety Button
Horn
Daytime Running Light (DRL)
Side Reflector
Footboard
Charging Port
Ambient Light
Left Control Switch
Rear Shock
Absorber
Right Control Switch
Power Button
Throttle
Horn Button
Turn Signal Button
Taillight &
Brake Light &
Rear Reflector
Power Button
Name Function Operation method
Press the Power Button to power on the scooter. Press and hold to power it off. Note: Only available when
the scooter is unlocked.
Press the Power Button to wake up the screen when the screen automatically dims.
When the scooter automatically enters PARK mode, press the Power Button to go back to the previous
speed mode.
While connecting to the scooter via the Segway-Ninebot app, press the Power Button to confirm Bluetooth
password.
Power on/off
Wake up the screen
Back to the previous
speed mode
Confirm Bluetooth
password
Press the left/right side of the Turn Signal Button, the left/right turn signal will turn off after three blinks.
press and hold the left/right side of the Turn Signal Button, the left/right turn signal will keep blinking until
it is released.
Throttle Twist the throttle to speed up.
Press the Horn Button, the scooter will beep once.
1) Press the Right Control Switch to activate the BOOST mode. 2) Press again or * In RACE mode only.
switch the speed mode to turn it off. * For GT2 only.
Left Control
Switch
Right Control
Switch
Turn Signal
Button
Turn on/off the headlight Rotate the Left Control Switch clockwise/counterclockwise to turn off/on the headlight.
Turn on/off the cruise
mode
Switch between 1WD
and 2WD
Press the Left Control Switch to turn on the cruise mode, and the scooter will cruise at a constant speed.
Press again to turn it off.
When the scooter is at a complete stop, press and hold the Left Control Switch to switch between 1WD and
2WD. * For GT2 only.
Rotate clockwise/counterclockwise to switch between speed modes.Mode switching
Activate the BOOST mode
Switch to WALK mode
For GT1: When the scooter is at a complete stop, press the Right Control Switch to switch to WALK mode.
At this point, press the Right Control Switch again to go back to the previous speed mode.
For GT2: When the scooter is at a complete stop, press and hold the Right Control Switch to switch to
WALK mode. At this point, press and hold the Right Control Switch again to go back to the previous speed
mode.
Speed up
Turn on the hornHorn Button
Turn on/off the left/right
signal
1
EN EN
01 02


Produkt Specifikationer

Mærke: Segway
Kategori: Scooter
Model: Ninebot GT1

Har du brug for hjælp?

Hvis du har brug for hjælp til Segway Ninebot GT1 stil et spørgsmål nedenfor, og andre brugere vil svare dig