Sencor SWS 30 Manual

Sencor Vejrstation SWS 30

Læs gratis den danske manual til Sencor SWS 30 (2 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Sencor SWS 30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RS8711ETC 1/2

Operation Instruction

一

一一, Main Functions:

1. Radio-controlled function

2. weather forecast for 4 states: sunny, semi-sunny, cloudy, rainy

3. seven languages to show the day: English, Germany, French, Italian, Spanish, Dutch, Danish

4. indoor temperature range: 0℃--50℃, sampling cycle: 12 seconds

℃--50℃, sampling cycle: 12 seconds

℃--50℃, sampling cycle: 12 seconds℃--50℃, sampling cycle: 12 seconds

5. indoor humidity range: 20%-----95%

6. outdoor temperature with RF: up to 3 channels

7. in/out trend indication of temperature

8. indication of the comfort index

9. the function of Alarm/ Snooze

10. 12/24 hour selectable

11. moon phase

12. LED light

13. world time zone set, -12/+12 hours

二. Power-On and reset

1. When Power-On and reset, LCD full display for 3 seconds 



 enter the normal state after “Beep” 



 check temperature and humidity

2. The calendar defaults 0:00 January 1, 2004

3. Alarm defaults 0:00

4. The weather icon defaults semi-sunny

5. Temperature scales defaults Celius degree ℃

℃

℃℃. Time system defaults 24Hr.

三

三三. instruction of operating the KEYS

3.1 Key functions

Six functional keys: Set, Alarm, Up, Down, Snooze, Channel

Clock Alarm Up Down SNZ/LIGHT Channel Alert Max/Min

standard mode

Click ----- Alarm

on/off

12hr/24hr

switchable

° °C/ F

switchable

Back Light/

enter Snooze

Switch to

CH1,CH2,CH3

On/Off

temperature

Alarm

Switchable

between

CH1, 2, 3

Hold enter into

clock setting

enter into

alarm setting

----- ----- ----- Clear

current

registered

Into

temperature

alarm setup

clear max/

min

Time set

Click Confirm the

setting item

----- one step

forward

one step

backward

----- --------- ---------- ----------

Hold ----------- ----- 8steps/second

forward

8steps/second

backward

----- --------- ----------- ----------

Alarm set

Click ---------- confirm the

setting item

one step

forward

One step

backward

----- --------- ------------ --------

Hold ---------- ----- 8steps/second

forward

8steps/second

backward

----- --------- ------------ -----

Temp alert set

Click

-----------

-----

one step

forward

one step

backward

-----

Choose

needed

channel

Confirm the

Setting item

---------

Hold

----------

------

8steps/second

forward

8steps/second

backward

-----

------

----------

3.2 Normal states

1. hold “clock” for 2 seconds to enter into time setting

2. click “Alarm” to switch the alarm on/off

3. hold “Alarm ” for 2 seconds to enter into Alarm setting

4. click “Up” to switch between 12hr/24hr

5. press “Down” to switch between °C/°F

6. press”SNZ/LIGHT”to turn on the back light 5 second

7. when ALARM rings, click “SNZ/LIGHT” to enter into the snooze state every 5 minutes

8. press “Channel” to switch RF channel, CH1 



CH2 CH3





9. hold “Channel” key for 2 seconds to clear out all data of current “Channel”

10. press”ALERT”key to switch temperature alarm on/off

11. hold”ALERT”key 2 seconds to enter temperature alarm setting

12. press”MAX/MIN”key to check maximal and minimum of temperature and humidity

13. hold”MAX/MIN”key 2 seconds to clear all record of temperature and humidity

3.3 Time set

1. hold “clock” key for 2 seconds to enter into time setting

2. the sequence of time setting: Year(2000-2050) 



Month



 Date 



 Language 



 Hour 



 Minute 



 Time zone 



Exit

Function

Operation

RS8711ETC 2/2

3. there will have 1Hz flashing during setting

4. press “clock” to confirm the setting, and enter the next setting state

5. press “Up” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will run forward by 8 steps/second.

6. press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

7. moon phase is changed accordingly time changed.

8. the system will exit automatically if no key is operated in 8 seconds.

3.4 Alarm set

1. hold “Alarm” key for 2 second to enter into alarm setting

2. the sequence of alarm setting: Hour 



 Minute 



 exit

3. there will have 1Hz flashing during setting

4. press “Alarm” to confirm the setting, and enter the next setting state

5. press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will run forward by 8 steps/seconds.

6. press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

7. the system will exit automatically if no key is operated in 8 seconds.

3.5 Temperature alarm setting

1. hold”ALERT”2 second into ALERT setting

2. setting sequence :upper limited 



lower limit



exit

3. press”CHANNEL”key when setting upper limited and lower limited to change different channel.

4. default of upper limited is:+70°C ,lower limited is -50°C

5. there will have 1Hz flashing during setting

6. press”ALERT”key confirm the end of setting then enter next item setting

7. press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will run forward by 8 steps/seconds.

8. press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

9. the system will exit automatically if no key is operated in 8 seconds.

10. Alert will automatically turn on when setting is finish.

3.6 RCC receiving function:

1. How to enter RCC receiving status:

a. It will enter RCC receiving state automatically 3 minutes after powering ON or resetting.

b. It enters RCC receiving automatically at2:00, 3:00, 4:00, 5:00 everyday.

c. Press “Down” or “UP” key for 2 seconds to enter RCC receiving status forcibly.

2. RCC receiving time is 7 minutes.

3. When it is receiving signals, press “Down” or “UP” key will exit RCC receiving status, pressing any other key will have no effect.

4. When DST is able and is receiving the signal, it will display the symbol of sun on the LCD, showing that it enters the DST system, and the

time will be 1 hour faster.

5. When the RCC symbols display fully, the relative RCC icon will be OFF if the present time is changed.

四

四四. Function and effect

4.1 The receiving function of RF

1. after installing the battery and checking temperature/humidity, it will enter RF receiving state automatically for 3 minutes.

2. under normal display mode, hold the “Channel” key for 2 seconds to clear out the channel information

3. if there is no effective signal with same ID code received for the current channel in 35 minutes, the temperature of that CH will shows “--.-“.

4. the temperature display will resume back when the correct signal is received again

4.2 The function of alarm

1. the BUZZER will ring for 2 seconds as below:

a. 0 – 10 sec.: one “beep” per second

b. 10 – 20 sec.: two “beep” per second

c. 20 – 30 sec.: four “beep” per second

d. after 30 sec.: “beep” continuously

2. when ringing, click “SNZ/LIGHT” key once to enter into 5 minutes snooze states, exit if any other key is clicked.

4.3 The function of temperature and humidity

1. the indoor temperature display range: 0℃

℃

℃℃ -- +50℃

℃

℃℃ (32F -- +122F)

2. the indoor temperature proposed operating range: 0℃

℃

℃℃ -- +40℃

℃

℃℃ (32F -- +104F)

3. the outdoor temperature display range: - 50℃

℃

℃℃ -- +70℃

℃

℃℃ (-58F -- +158F)

4. the outdoor temperature proposed operating range: -5℃

℃

℃℃ -- +45℃

℃

℃℃ (23F -- +113F)

5. the temperature resolution: 0.1℃

℃

℃℃

6. the indoor humidity range: 20% --- 95%

7. the humidity resolution: 1%RH

8. sampling period: 12 seconds.

9. the temperature and hygrometer sampling will be held when the alarm is ringing

10. the RF Transmission Frequency: 433.92MHz

11. No. of Remote unit: Up to 3units

4.4 The function of weather forecast

1. weather icons for 4 states: sunny 



 semi-sunny 



 cloudy 



 rainy

Produkt Specifikationer

Mærke:	Sencor
Kategori:	Vejrstation
Model:	SWS 30

Har du brug for hjælp?

Hvis du har brug for hjælp til Sencor SWS 30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation Sencor Manualer

Sencor SWS 2300 Manual

24 December 2024

Sencor SWS 4440 Manual

24 December 2024

Sencor SWS 3200 Manual

24 December 2024

Sencor SWS 260 Manual

15 December 2024

Sencor SWS 270 Manual

18 September 2024

Sencor SWS 5600 Manual

10 September 2024

Sencor SWS TH2900 Manual

4 September 2024

Sencor SWS 240 OR Manual

4 September 2024

Sencor SWS 4660 Manual

4 September 2024

Sencor SWS TH5051 Manual

4 September 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Essentiel B TH01 Manual

18 Juni 2025

Levenhuk Wezzer SN10 Manual

17 Juni 2025

Levenhuk Wezzer PH20 Manual

16 Juni 2025

Levenhuk Wezzer Teo TH10 Manual

16 Juni 2025

Levenhuk Wezzer Teo TH30 Manual

16 Juni 2025

Levenhuk Wezzer Teo TH50 Manual

16 Juni 2025

Levenhuk Wezzer Air PRO DM20 Manual

16 Juni 2025

Levenhuk Wezzer Teo TH40 Manual

15 Juni 2025

Levenhuk Wezzer PRO LP240 Manual

15 Juni 2025

Levenhuk Wezzer BASE L50 Manual

15 Juni 2025