Seymour Duncan WOODY Manual

Seymour Duncan Ikke kategoriseret WOODY

Læs gratis den danske manual til Seymour Duncan WOODY (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Seymour Duncan WOODY, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WOODYTM

SOUND HOLE PICKUPS

FOR STEEL STRING ACOUSTIC GUITARS

INSTALLATION AND OWNER’S MANUAL

INTRODUCTION

Congratulations on your purchase of a Seymour Duncan WoodyTM These

pickups have been crafted specifically to fill the needs of the acoustic

guitarist. You do not need to use a preamplifier with these products to get a

good sound. Every feature has been carefully chosen to give you a warm

natural sound of unusual quality for a magnetic sound hole pickup.

There are three members of the Woody family, a single coil design (SC), a

hum canceling Stack® (HC), and the XL, a pro model Stack

® with adjustable

pole pieces. The Woodys are fashioned from beautifully finished select

maple or beech to compliment and enhance the appearance of your instru-

ment. They will fit in guitar sound holes measuring 3.75” (95 mm) to 4” (102

mm). The shaped magnetic field insures great string balance with most

acoustic string sets. Each pickup has its own uncommonly warm signature

sound, with the SC being full and clear, the HC displaying rich articulation,

and the XL in a professional class of its own.

Every Woody comes ready to play with a studio quality 14’ cable. The Woody

XL comes complete with an Allen wrench and an extra pole piece for the G

string. If you use a solid G string you’ll want to replace the stock pole piece

to get a better string to string balance.

INSTALLATION

1) Orient the Woody so the cable exits towards the bridge

2) Slip the Woody into the sound hole on the high E string side

3) Hook one edge of the Woody on the sound hole on the low E side

4) Push the Woody towards the bass strings until the bottom lip clears the

sound hole on the low E side

5) Allow the Woody to spring into place, capturing the sound hole on the

high E side

6) Adjust the height on the bass and treble side to taste

7) Adjust the pole piece heights if needed (XL only). The setup should be

pretty close right out of the bag. Avoid radical setting of the pole pieces for

best hum cancellation. The pole piece heights for the B and high E strings

should generally be below the surface of the pickup, with the rest of the pole

pieces flush or slightly elevated.

8) Plug in and wail!

Single Coil

Hum Cancelling STACK

Pro Model STACK

w/ adjustable pole pieces

Figure 1 Figure 2

WARRANTY

Seymour Duncan workmanship and materials are the finest available, so we offer the

original purchaser a two year warranty on both from the day you buy your pickup.

We will repair or replace this pickup, at our option, if it fails due to faulty workman-

ship or materials during this period. Defective pickups should be returned to your

dealer or sent to the factory postage prepaid along with proof of purchase.

This warranty does not apply to damage to your instrument or the pickup caused

by misuse, mishandling, or installation. Seymour Duncan reserves the right to be

the sole judge as to the misuse or abuse of the product. The company assumes no

liability for incidental or consequential damages which may result from the failure of

this product. Any warranties implied by law are limited to the duration of this express

limited warranty.

Date of Purchase

Dealer

KEEP YOUR BILL OF SALE IN A SAFE PLACE.

IMPORTANT NOTE:

Installation in small bodied guitars with sound holes smaller than 3.8” can be

made much easier by following these simple steps.

1) Pull out the foam in the slots on both sides of the pickup

2) Cut each piece of foam in half along its length

3) Reinstall the foam pieces in the slots. Tack them back in place with a drop

of KrazyTM Glue on the edge of the foam

4) In extreme cases the lower lip of the pickup on the treble side may be filed

or sanded down for increased clearance on installation

5427 Hollister Avenue

Santa Barbara, CA 93111-2345

Ph: (805) 964-9610 • Fax: (805)964-9749

www.seymourduncan.com

Figure 3

Tilted for more high string response

E GB D A E

Aligned for even response

Tilted for more bass string response

We hope that you enjoy your new Woody. The natural sound of an electrified

acoustic guitar is an enjoyable and thriving part of the music tradition. Thank

you for selecting our product to complement your instrument. Let us know if

you have any questions, suggestions, or just want more information on our

other acoustic and electric products. We’d like to hear from you.

Produkt Specifikationer

Mærke:	Seymour Duncan
Kategori:	Ikke kategoriseret
Model:	WOODY

Har du brug for hjælp?

Hvis du har brug for hjælp til Seymour Duncan WOODY stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Seymour Duncan Manualer

Seymour Duncan YJM-500 Manual

24 August 2024

Seymour Duncan WOODY Manual

24 August 2024

Seymour Duncan 805 Overdrive Manual

24 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Lexibook JC598i15 Manual

4 Juli 2025

Alutruss Trilock S-PAL-32 Manual

4 Juli 2025

Lexibook JC598 Manual

4 Juli 2025

Stihl Dynamic X-Ergo Manual

4 Juli 2025

Guede 55104 Manual

4 Juli 2025

Kryptonite Keeper 510 Manual

4 Juli 2025

Ikea BLÄDDRARE 304.744.03 Manual

4 Juli 2025

Allied Telesis AT-2911SX/LC Manual

4 Juli 2025

EXSYS EX-1318 Manual

4 Juli 2025

Ikea VESTERÖY 705.119.03 Manual

4 Juli 2025