Shortening Shuttle S-914-W Manual


Læs gratis den danske manual til Shortening Shuttle S-914-W (6 sider) i kategorien Fryser. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Shortening Shuttle S-914-W, eller vil du spørge andre brugere om produktet?

Side 1/6
Proudly Made in the USA
in
Worcester, MA 01605
800-533-5711
508-757-5161
FAX 508-831-9990
e-mail sales@Shortening-Shuttle.com
online ordering @
12 Month Warranty
If, within twelve months from date of purchase, this Shortening Shuttle
®
Pump
fails due to a defect in
materials or workmanship, simply call us and we will repair or replace it free of charge.
Note: this does not include parts that normally wear.
( This warranty gives you speci c legal rights, and you may also have other rights which vary from state to state. )
Worcester Industrial Products Corp
7 Brook eld Street, Worcester, MA 01605
914-031 © August 2017
Assembly, Operation
and
Care Manual
The
Shortening Shuttle
®
Pump
Simplicity Series
Model # S-914-W
CAUTION:
Read instructions carefully
before using to insure safe operation.
Safety Precautions
Please read carefully and follow all safety
precautions to ensure maximum safety.
)Maximum temperature the tank of the Shuttle Pump will safely
withstand: 300
º
F
)Warning:
You MUST wear proper clothing when operating
this unit. We recommend using heat resistant Safety
Gloves. See OSHA guidelines for handling hot oil.
)Caution: Skin burns at 120
º
F. For maximum safety use when
hot oil is below 120
º
F.
Operating Precautions
)Caution: Debris must be kept out of the pump when not in
use. Make sure that the Basket Strainer & Shuttle
Wand are in place at all time.
)Warning: Do Not use excessive force to rotate the pump.
Excessive force will damage the pump.
)Warning: If water is pumped through the unit, the pump will
be damaged by subsequent rust deposits. If water
is accidently run through the pump, then pump
four(4) to eight(8) cups of clear warm oil (80 to
90
º
F) through it to clear out the water and coat the
internal parts with oil.
)Cleaning: Rinse outside only with hot water and mild
detergent (
Do Not use any caustic cleaning agents. Most
“Boil Out” products are caustic
). Clean the inside by
wiping with a cloth or paper towels. Do Not put
water inside the Shortening Shuttle
®
Pump.
)Never leave water in the unit. Never run water thru pump.
)Never mix hot oil with water in the unit.
2
Shortening Shuttle
®
Pump
Replacement Parts
Long Hose Assm. .................................. 914-H2
Short Hose Assm. ............................... 914-H3-Y1
12” Handle Kit .....................................914-203
Double Wheel Kit ..................................914-204
Wheel Bracket Kit .................................914-205
Safety Gloves, heat resistant .................914-207
Red Pump ..............................................914-960
Cover Assembly ....................................914-211
Te on Glide Block
(under tank) ...............914-213
Basket Strainer ................................... SP-BS-100
Crank Handle Assembly ........................914-218
Safety Labels Kit ...................................914-219
Shuttle Wand .......................................SS-WAND
Accessories
Basket Filter ....................................... SP-BF-200
For Parts Call 800-533-5711
or
e-mail sales@shortening-shuttle.com
or
order online Shortening-Shuttle.com
11
Speci cations subject to change without notice.


Produkt Specifikationer

Mærke: Shortening Shuttle
Kategori: Fryser
Model: S-914-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Shortening Shuttle S-914-W stil et spørgsmål nedenfor, og andre brugere vil svare dig