Shortening Shuttle SS-611 Manual


Læs gratis den danske manual til Shortening Shuttle SS-611 (2 sider) i kategorien Fryser. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Shortening Shuttle SS-611, eller vil du spørge andre brugere om produktet?

Side 1/2
Spare Parts
All of the removable parts on the Shortening Shuttle
®
are available
from us. When you need replacement parts call us and order genuine
Shortening Shuttle
®
parts.
Proudly Made in USA in
Leominster,
1-800-533-5711 (508)-757-5161
email: sales@Shortening-Shuttle.com Specifications subject to change without notice.
www.Shortening-Shuttle.com
Spare Part #
s
By Model
Description SS-611 SS-611-T SS-611-TL SS-709-T
Single Wheel Kit SS-SWK SS-SWK SS-SWK SS-SWK
Double Wheel Kit SS-DWK SS-DWK SS-DWK SS-DWK
Wheel Handle Kit SS611WHK SS611WHK SS611WHK SS709WHK
Wheel Handle Brkts SS611WHB SS611-TWHB SS611-TLWHB SS709WHB
Top Handle Kit SS611THK SS611THK SS611THK SS709THK
Baf
e
Screen
Assm.
SS61
1BSA
SS61
1BSA
SS61
1-TLBSA
SS709BSA
Safety Labels Kit SS-HOT-LB SS-HOT-LB SS-HOT-LB SS-HOT-LB
Shuttle Accessories
Dumpster Extension SS-611-DX SS-611-DX SS-611-DX SS-709-DX
Splash Guard
SS-61
1-SG
SS-61
1-SG
SS-61
1-SG
SS-709-SPG
Shuttle Cover
SS-61
1-COV
SS-61
1-COV
SS-61
1-COV
SS-709-COV
Drop
-
In
Shuttle Filter SS-SF-100 SS-SF-100 SS-SF-100 SS-SF-100
Shuttle Funnel SS-FUN-100 SS-FUN-100 SS-FUN-100 N/A
Safety Gloves, heat resistant 914-207
Shuttle Hook SS-WHOOK
SS-709
&
The
Shortening Shuttle
®
Economy Series
Model #’s SS-611, SS-611-T, SS-611-TL, SS-709, SS-709-T
Operation
and
Care Manual
Aesthetics
You may notice a few surface scratches on your new Shortening Shuttle
®
.
Due to the nature of the manufacturing process and the normal handling of
materials prior to manufacturing, some surface scratches are expected.
Safety Precautions
Please read carefully and follow all safety
precautions to ensure maximum safety.
)
Maximum temperature the tank of the Shuttle will safely
withstand: 300
º
F
)
W
arning
:
Y
ou MUST
wear proper clothing when operating
this unit. We recommend using heat resistant Safety
Gloves. See OSHA guidelines for handling hot oil.
)
Caution: Skin burns at 120
º
F. For maximum safety use when
hot oil is below 120
º
F.
Operating Precautions
)
Warning: W
aste container
MUST be of proper height for safe
use of the Shuttle. If not then obtain proper dumpster
or order a dif
ferent size
Shortening Shuttle
®
.
)
Cleaning:
Rinse with hot water and a mild detergent (DO NOT
use any caustic cleaning agents).
)
Never
leave water in the unit.
)
Never
pour any caustic cleaning solutions inside or on the
outside of the
Shortening Shuttle
®
. This action can
cause damage to the unit’
s structural integrity
.
)
Warning:
Never use the
Shortening Shuttle
®
without the baf
e
screen in place.
The baf
e screen prevents hot shortening
from splashing out of the
Shortening Shuttle
®
due to
excessive jostling and/or the accidental dropping of the
unit while containing liquids.
)
Never
mix hot oil with water in the unit.
Cleaning: Be sure all of the shortening has been
emptied from the
Shortening Shuttle
®
before cleaning. Rinse
the inside and outside with hot water and a mild detergent
(Do Not use any caustic cleaning agents such as boil-out).
Thoroughly rinse out the inside with hot water to remove all
cleaning solutions. Install baf
e screen when
nished.
Caution: Make sure that the inside of the Shortening Shuttle
®
is completely dry
before lling with hot shortening.
NOTE:
If shortening hardens inside the Shortening Shuttle
®
then scoop out as much as possible
of the hardened shortening, but DO NOT
rinse inside until after the next use as hot shortening will
melt the remaining shortening left in the corners
(the inside may be seen by using a small mirr
or)
.
How To Use The Shortening Shuttle
®
Step 1 Turn the fryer OFF and allow the shortening to
cool to less than 120° F to reduce the likelihood of
burns.
Step 2 While wearing appropriate apparel to prevent burns,
position the Shortening Shuttle
®
under the drain
and slowly empty the fryer or pump directly from
the ltering machine into the Shortening Shuttle
®
.
DO NOT ll above the baf e screen opening.
Step 3 Pull
the
Shortening Shuttle
®
away from the fryer.
SQUA
T
down, grasp the plastic handle and with Bent
Knees raise the Shortening Shuttle
®
to transporting
position and carefully pull or push it to the discard
area. Then,
push the Shortening Shuttle
®
toward
the waste container* until it touches the bottom of
the waste container
.
Step 4 Continue to push the Shortening Shuttle
®
until the
neck of it rests over the top of the waste container
.
Step 5 Squat down with Bent Knees and grasp plastic handle
with both hands.
Then, using the leg muscles, pivot
the
Shortening Shuttle
®
up as shown, emptying the
waste oil.
F
or clarity the
illustrations are shown
without safety apparel.
Proper safety clothing is
always recommended.
*
Waste container MUST be of proper height for safe use of the
Shuttle. If hen obtain proper dumpster or alter dumpster not, t
area before using the Shuttle.
12 Month Warranty
If, within twelve months from date of purchase, this Shortening Shuttle
®
fails due to a
defect in materials or workmanship, simply call us and we will repair or replace it free of
charge. (This warranty gives you speci c legal rights, and you may also have other rights which vary from state to state.)


Produkt Specifikationer

Mærke: Shortening Shuttle
Kategori: Fryser
Model: SS-611

Har du brug for hjælp?

Hvis du har brug for hjælp til Shortening Shuttle SS-611 stil et spørgsmål nedenfor, og andre brugere vil svare dig