Shure AXT630 Manual


Læs gratis den danske manual til Shure AXT630 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Shure AXT630, eller vil du spørge andre brugere om produktet?

Side 1/9
General Description
Antenna Distribution Systems send the RF signal from a single pair of anten-
nas to multiple receivers. Ultra-linear amplification and adjustable attenuation
optimize performance in difficult RF environments. Selectable input filters
match the available frequency bands of transmitters, providing extra protection
from strong out-of-band signals. BNC antenna output pairs distribute band-
filtered signals to up to 4 receivers. A pair of wideband cascade ports supply
wideband RF signals to Spectrum Managers or additional antenna distribution
amplifiers. Networking allows Wireless Workbench to control filtering ranges
and attenuation. For added flexibility, Axient Antenna Distribution Systems
are compatible with Shure ULX-D and UHF-R receivers.
To maximize use of the RF spectrum, Antenna Distribution Systems are
available in the following frequency ranges:
(470-698 MHz)AXT630
(606-814 MHz)AXT631
(470-510 MHz and 630-787 MHz)AXT632
Note: Instructions in this system guide apply all models of Axient Antenna
Distributions Systems.
Features
Selectable input filtering provides system-wide protection against strong
out-of-band signals
Wideband filtering option covers multiple bands
Up to 15 dB of selectable RF attenuation for signal-to-noise optimization
Front panel interface and Wireless Workbench 6 software control provide
easy setup and control of filtering, antenna power, and attenuation
BNC outputs: 4 antenna output pairs
Wideband RF cascade port with selectable 3 dB make-up gain for con-
necting wideband devices
Ethernet Networking: 2 PoE enabled Ethernet ports
IEC power ports enable daisy-chaining of AC power
Mounting Instructions
This component is designed to fit into an audio rack.
WARNING: To prevent injury this apparatus must be securely attached to
the rack.
Controls and Connectors
power
SET
2 31
AXT631
606-814 MHz
Antenna Distribution
antenna
in
B A
4 5 6
8
7 9
10 11
12
14
13
AXT631
4B 3B 2B 1B
RF outputs
4A 3A 2A 1A
RF outputs
PoE Class 1
① LCD Display
Displays menu and settings.
② Navigation Buttons
Arrows: Scroll menus and change settings
Set: Enables menu edits and saves changes
Tip: Press and hold the button for 1 second to activate the Hardware Identify feature in Wireless Workbench.Set
1/9©2017 Shure Incorporated
AXT630
Antenna Distribution System
③ Power Switch
Powers the unit on or off
④ AC Power Primary Switch
AC Main Power Switch
⑤ AC Power In
IEC Connector, 100-240 V AC
⑥ AC Power Cascade
Use the IEC extension cables to connect up to 5 devices to a single AC power source.
⑦ Network Speed LED (amber):
Off = 10 Mbps
On = 100 Mbps
⑧ Ethernet Ports (2)
PoE Class 1 enabled. Connect to an Ethernet network to enable remote control and monitoring
⑨ Network status LED (green)
Off = no network link
On = network link active
Flashing = network link active, flash rate corresponds to traffic volume
⑩ RF Output Connectors, Channel B
Distributes RF signal for Channel B
⑪ RF Output Connectors, Channel A
Distributes RF signal for Channel A
⑫ Antenna IN Ports, Channels A and B
Antenna inputs are DC biased for use with active antennas or in-line amplifiers.
⑬ RF Cascade Ports, Channels A and B
Passes the wideband RF signal from one device to the next, allowing up to 5 devices to share a single pair of antennas.
⑭ Antenna Input Status LED
Green = DC power on
Off = DC power off
Red = Antenna fault or over-current condition
Antennas
The Antenna Distribution Systems are compatible with front-mounted anten-
nas or with remote-mounted antennas.
Note: When using the input band filtering function, select an antenna with
bandwidth to cover the filter range.
Installing Front-mounted Antennas
Mounting the antennas on the front panel improves system performance by
providing a clear signal path for the RF signal. Use the supplied bulkhead
adapter kit to install the antennas on the front panel.
1. Insert the bulkhead adapters on the supplied front-mounting cables
through the holes in each bracket and secure them from the front using
the supplied hardware.
2. Connect the supplied antennas cables to the antenna input BNC connec-
tors.
3. Install the antenna onto the bulkhead adapters.
Note: To minimize the possibility of signal dropout and optimize performance,
point the antennas up and away from each other at 45° from vertical.
Installing Remote Antennas
Remote antennas offer greater flexibility for antenna placements and can
improve performance by providing a less obstructed transmission path and
extending range. Consult for tips and best practices for remote mounting
antennas.
RF Output Distribution
4B 3B 2B 1B
RF outputs
4A 3A 2A 1A
RF outputs
Shure IncorporatedAXT630 Antenna Distribution System
2017/10/122/9


Produkt Specifikationer

Mærke: Shure
Kategori: Ikke kategoriseret
Model: AXT630

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure AXT630 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shure Manualer

Shure

Shure MoveMic MV-R Manual

21 Februar 2025
Shure

Shure AXT901 Manual

16 December 2024
Shure

Shure A2WS Manual

2 December 2024
Shure

Shure A15HP Manual

2 December 2024
Shure

Shure A412MWS Manual

2 December 2024
Shure

Shure A412B Manual

2 December 2024
Shure

Shure A910-HCM Manual

1 December 2024
Shure

Shure A50D Manual

1 December 2024
Shure

Shure A710-FM Manual

1 December 2024
Shure

Shure A75M Manual

1 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer