Shure Beta 58A Manual

Shure Mikrofon Beta 58A

Læs gratis den danske manual til Shure Beta 58A (12 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Shure Beta 58A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Model BETA 58A® User Guide
©2005, Shure Incorporated
27C2796 (Rev. 5) Printed in U.S.A.
MODEL BETA 58A® SUPERCARDIOID DYNAMIC
VOCAL MICROPHONE
GENERAL
The Shure BETA 58A is a high-output, supercardioid dynamic vo-
cal microphone for professional sound reinforcement and project
studio recording. It maintains a true supercardioid pattern through-
out its frequency range. This ensures high gain before feedback,
maximum isolation from other sound sources, and minimum off-
axis tone coloration.
The BETA 58A has a shaped frequency response that is ideal for
close-up vocals. The superb performance of this microphone is not
affected by rough handling because of its rugged construction,
proven shock mount system, and hardened steel mesh grille. Typ-
ical applications for the BETA 58A include lead vocals, backup vo-
cals and speech.
FEATURES:
�Frequency response tailored for vocals, with brightened
midrange and bass rolloff to control proximity effect
�Uniform supercardioid pattern for high gain before
feedback and superior rejection of off-axis sound
�Neodymium magnet for high signal-to-noise output
�Hardened steel mesh grille that resists wear and abuse
�Advanced pneumatic shock mount system that minimizes
transmission of mechanical noise and vibration
�Minimally affected by varying load impedance
�Legendary Shure quality and reliability
APPLICATION AND PLACEMENT
The BETA 58A is designed for close-up vocals, and can be hand
held or mounted on a stand. Some of the most common applica-
tions and placement techniques are listed in the following table.
Keep in mind that microphone technique is largely a matter of per-
sonal taste; there is no one "correct" microphone position.
GENERAL RULES FOR MICROPHONE USE
�Aim the microphone toward the desired sound source and
away from unwanted sources. Since supercardioid
microphones such as the BETA 58A have narrow pickup
patterns and can pick up sounds from the rear, this may
not be obvious or intuitive.
�Place the microphone as close as practical to the desired
sound source. Refer to the table above.
�Work close to the microphone for extra bass response.
�Use only one microphone to pick up one sound source.
�Keep the distance between microphones at least three
times the distance from each source to its microphone.
�Use the fewest number of microphones as is practical.
�Place microphones as far as possible from reflective
surfaces.
�Add a windscreen when using the microphone outdoors.
�Avoid excessive handling to minimize pickup of
mechanical noise and vibration.
�Do not cover any part of the grille with your hand.
PROXIMITY EFFECT
Unidirectional microphones such as the BETA 58A progressively
boost bass frequencies by 6 to 10 dB at 100 Hz when the micro-
phone is at a distance of about 6 mm (1/4 in.) from the sound
source. This phenomenon, known as proximity effect, can be used
to create a warmer, more powerful sound. To prevent explosive low
frequency sound during close-up use, the BETA 58A bass re-
sponse gradually rolls off. This provides greater control and helps
the user take advantage of proximity effect.
SUGGESTED MICROPHONE
PLACEMENT
TONE QUALITY
Lips less than 15 cm (6 in.) away
or touching the windscreen, on
axis to microphone.
Robust sound, emphasized bass,
maximum isolation from other
sources.
15 to 60 cm (6 in. to 2 ft.) away
from mouth, just above nose
height.
Natural sound, reduced bass.
20 to 60 cm (8 in. to 2 ft.) away
from mouth, slightly off to one side. Natural sound, reduced bass and
minimal "s" sounds.
90 cm to 1.8 m (3 to 6 ft.) away. Thinner, distant sound; noticeable
levels of ambient noise.
2
STAGE MONITOR & P.A. LOUDSPEAKER PLACEMENT
For maximum rejection of unwanted sound, place the stage moni-
tor(s) or P.A. system loudspeaker at a 60 angle from the rear of °
the BETA 58A, not directly behind it. Always check out the stage
setup before a performance to ensure that microphone and moni-
tor placement is optimum.
SPECIFICATIONS
Type
Dynamic (moving coil)
Frequency Response
50 to 16,000 Hz
NOTE: The curve below shows on-axis response at a distance of 2
feet from a uniform sound source. Your response may vary, depend-
ing on microphone position.
Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis,
uniform with frequency
Output Level (at 1,000 Hz)
Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
*1 Pa = 94 dB SPL
Impedance
Rated impedance is 150 Ω (290 Ω actual) for connection to micro-
phone inputs rated low Z
Phasing
Positive pressure on diaphragm produces positive voltage on
pin 2 with respect to pin 3
Case
Silver blue enamel-painted die cast metal with hardened, matte-
finished, spherical steel mesh grille
Adjustable, Stand Adapter
Slip-in microphone mounting, unbreakable, adjustable through
180 with standard 5/8"-27 thread, black finish °
Dimensions
Net Weight
278 grams (9.92 oz)
Certification
Eligible to bear CE Marking. Conforms to European EMC Direc-
tive 89/336/EEC. Meets applicable tests and performance crite-
ria in European Standard EN55103 (1996) parts 1 and 2, for
residential (E1) and light industrial (E2) environments.
FURNISHED ACCESSORIES
Adjustable Stand Adapter ...................................... A25D
5/8" to 3/8" (Euro) Thread Adapter ...................95A2050
Storage Bag..........................................................26A21
OPTIONAL ACCESSORIES
Windscreen...............A58WS Series (8 colors available)
Isolation Mount.........................................A55M, A55HM
7.6 m (25 ft.) Cable ......................................C25E, C25F
REPLACEMENT PARTS
Cartridge.................................................................R176
Grille Assembly..................................................RK265G
Plug (Connector) Assembly .............................. 90F1984
180°
120°120°
90°
0°
P.A. SYSTEM
LOUDSPEAKER
MONITOR
LOUDSPEAKER(S)
RECOMMENDED LOUDSPEAKER LOCATIONS
20 200001000 1000050 100 98765432 98765432
+10
0
–10
Hz
dB
-20
+20
3 mm (1/8 in)
25 mm (1 in)
51 mm (2 in)
606 mm (2 ft)
TYPICAL FREQUENCY RESPONSE
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
500 Hz
1000 Hz
250 Hz
6300 Hz
10000 Hz
2500 Hz
TYPICAL POLAR PATTERNS
GREEN
YELLOW
RED
BLUE
INTERNAL WIRING
160 mm
(6.5 in.)
50 mm
(2 in.)
OVERALL DIMENSIONS

Produkt Specifikationer

Mærke: Shure
Kategori: Mikrofon
Model: Beta 58A

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure Beta 58A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon Shure Manualer

Shure

Shure SM58 Manual

22 Juli 2025
Shure

Shure PGA56-XLR Manual

15 Juli 2025
Shure

Shure ULXD6 Manual

23 Juni 2025
Shure

Shure MoveMic One Manual

21 Februar 2025
Shure

Shure MV7i Manual

21 Februar 2025
Shure

Shure VP89M Manual

29 December 2024
Shure

Shure PGA DRUMKIT4 Manual

29 December 2024
Shure

Shure PGA DRUMKIT6 Manual

29 December 2024
Shure

Shure Microflex MX395 Manual

29 December 2024
Shure

Shure KSM11 Manual

29 December 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

BOYA

BOYA BY-WM3T-D2 Manual

12 August 2025
Vocopro

Vocopro VHF-4000 Manual

12 August 2025
Cyber Acoustics

Cyber Acoustics CVL-2009 Manual

12 August 2025
1Mii

1Mii M4 Manual

12 August 2025
Nedis

Nedis GSMIC410BK Manual

12 August 2025
Asus

Asus ROG Strix Magnus Manual

11 August 2025
Pyle

Pyle PSW578UT Manual

10 August 2025
Behringer

Behringer BX2020 Manual

9 August 2025
Sennheiser

Sennheiser EW-D SKM-S Manual

9 August 2025
Sennheiser

Sennheiser LM 6070 Manual

9 August 2025