Shure SE215 Pro Manual

Shure Headset SE215 Pro

Læs gratis den danske manual til Shure SE215 Pro (4 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Shure SE215 Pro, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

General Description

Shure Sound Isolating™ Earphones, deliver a detailed soundstage free from

outside noise. The powerful and stylish Shure SE earphones come with a

detachable cable, adapters, a durable carrying case, and interchangeable

Sound Isolating sleeves for a comfortable and personalized fit.

Wearing the Earphones

The following are some suggested ways of wearing the earphones.

Over the ear in back

Wear the cable over the ear and secure it behind the head to help keep the

earphones in place during physical activity.

Tighten the cable and take up slack by raising the cable cinch.

Detachable Cable

You may need to detach the cable from the earphones to attach optional

components or to replace the cable if it becomes damaged. To prevent acci-

dental separation, the connector has a snug fit. Take special care to prevent

damage to the earphone and connector.

• Do not use pliers or other tools.

• Grasp the connector and the earphone as close as possible to where

they join.

• Pull straight apart—do not twist. Cable is a snap fit, not threaded.

Note: If you pull at an angle, the connector will not detach.

• Do not pull on the cable or put any pressure on the earphone nozzle.

• Listen for a click when connecting.

• When reattaching the cable, match the "L" and "R" markings. For clear

cables and earphones, match the color dots (Red=Right, Blue=Left).

Audible click when properly connected

Inserting the Earphones

Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.

SE215M

Shure Earphones

Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone

deeper into the ear canal or try a different sleeve.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Changing Sleeves

• Twist and pull to remove the sleeve from the nozzle.

• Slide on a new sleeve so that it completely covers the barb and the

nozzle.

Caution: If the barb or any of the nozzle is exposed, the sleeve is not prop-

erly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure

proper fit and performance, use only sleeves supplied by Shure (unless using

custom molded sleeves).

Removing the Earphones

Grasp the body of earphone and gently twist to remove. Do not pull on cable to remove earphone.Note: