Shure SM94-LC Manual

Shure Mikrofon SM94-LC

Læs gratis den danske manual til Shure SM94-LC (8 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Shure SM94-LC, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Model SM94 User Guide
©2005, Shure Incorporated
27C2689 (Rev. 5)
Printed in U.S.A.
MODEL SM94
UNIDIRECTIONAL CONDENSER MICROPHONE
The Model SM94 is a unidirectional electret condenser
microphone tailored to the instrument miking needs of professional
musicians and sound engineers in both live performance and
sound recording. Its smooth, flat frequency response is free of
either a “presence peak” or a low-frequency rolloff, making it a
perfect choice for all types of musical instruments. The SM94 is
equally at home in sound reinforcement systems or in sound
studios and motion picture/TV scoring stages. When used with the
optional windscreen, the SM94 can be used by vocalists and
speechmakers who desire a wide, flat response with minimum
coloration.
The SM94 can be powered by any phantom power source, or by
an internal 1.5-volt AA battery. The battery, which serves as a
backup power source in the event of phantom power failure, can
provide up to 5,000 hours of continuous operation.
The SM94 is supplied with a swivel adapter for use on a
microphone stand, boom or gooseneck, and a zippered vinyl
storage bag. Model SM94-LC is supplied without a cable.
Accessories include a foam windscreen (A3WS), two-channel
phantom power supply (PS1A), and 7.6 m (25 ft.) microphone
cable (C25J).
Features
• Wide, flat response for optimum musical instrument sound re-
production
• Full spectrum sound–no presence peak or low-end rolloff
• Cardioid polar pattern that is uniform with frequency and sym-
metrical about axis for maximum rejection of unwanted sound
and minimum of-axis coloration
• Very low susceptibility to RF and electromagnetic hum
• Low distortion output and wide dynamic range for variety of load
impedances
• Shock–mounted cartridge for reduced handling noise
• Accepts 12 to 48 Vdc phantom power
• Rugged all–metal construction
• Usable over wide range of environmental conditions
• Built–in battery power backup
• Optional foam windscreen
SPECIFICATIONS
Type
Cardioid condenser (electret bias)
Frequency Response
40 to 16,000 Hz (see Figure 1)
TYPICAL FREQUENCY RESPONSE
FIGURE 1
Polar Pattern
Cardioid (unidirectional)–uniform with frequency,
symmetrical about axis (see Figure 2)
TYPICAL POLAR PATTERNS
FIGURE 2
2
Output Impedance
Rated at 150 ; 200 actual
Recommended Minimum Load Impedance
800
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: –49 dBV/Pa (3.5 mV) (phantom)
–50 dBV/Pa (3.2 mV) (battery) (1 Pa = 94dB SPL)
Output Clipping Level (1 kHz, 3% THD)
800- Load–14 dBV (0.63 V) (phantom), 1% THD;
–23 dBV (0.71 V) (battery), 3% THD
Total Harmonic Distortion
< 0.25% (130 dB SPL at 250 Hz into 800 load)
Maximum SPL
800 Load: 141 dB (phantom), 123 dB (battery)
Hum Pickup
–3 dB equivalent SPL in a 1 millioersted field (60 Hz)
Output Noise (equivalent sound pressure levels;
measured with true rms voltmeter)
22 dB typical, A-weighted
25 dB typical, weighted per DIN 45 505
Dynamic Range
119 dB (phantom); 101 dB (battery) (maximum SPL,
2000– load, to A–weighted noise level)
Signal-to-Noise Ratio
72 dB (IEC 651)* at 94 dB SPL
Overvoltage Protection
Maximum External Voltage Applied to Pins 2 and 3
with respect to Pin 1: +52Vdc
Reverse polarity protected to 75 Vdc
Polarity
Positive pressure on diaphragm produces positive
voltage on pin 2 relative to pin 3
Cartridge Capacitance
24 pF
Power
Phantom Operation
Supply Voltage: 11 to 52 Vdc, (+) pins 2 and 3
Current Drain: 1.0 to 1.2 mA max. at 52 Vdc
Battery Operation
Type: 1.5 V alkaline, AA size (NEDA 15A)
Life: Up to 5,000 hours with fresh battery
Environmental Conditions
Temperature:
Storage: . . . . . . . –29 to 74 C (–20 to 165 F)
Operating: –6.7 to 49 C (20 to 120 F)
Humidity:
Storage . . . . 0–95% relative humidity at room
temperature (72 to 80 F, 22 to 27 C)
Connector
XLR professional audio 3-Pin
Case
Steel and brass construction with gray finish and
stainless steel mesh grille
Dimensions
See Figure 3
OVERALL DIMENSIONS
FIGURE 3
Weight
Net 250 grams (8.8 oz) less battery
Packaged SM94-LC: 949.7 grams (2 Ib 1 1/2 oz)
Certification
Eligible to bear CE Marking. Conforms to European EMC Directive
89/336/EEC. Meets applicable tests and performance criteria in
European Standard EN55103 (1996) parts 1 and 2, for residential
(E1) and light industrial (E2) environments.
*S/N ratio is difference between microphone output at 94 dB SPL and
microphone self-noise A-weighted.
OPERATION
The SM94 is designed for phantom powering by a Shure PS1A
Power Supply, or by any microphone power supply providing 12 to
48 Vdc phantom voltage, or by any microphone mixer (such as the
Shure SCM262 and SCM268) with a phantom supply. In addition,
the SM94 can be powered by a single 1.5-volt AA alkaline battery.
The battery also serves as a backup in case of phantom power
failure. A new alkaline battery will provide up to 5,000 hours of
continuous microphone operation. Note that the microphone is
powered at all times during battery operation but there is no battery
drain during phantom-powered operation.
BATTERY OPERATION
Disconnect the microphone cable, and unscrew the SM94 handle,
turning counterclockwise (from top) until the handle is free of the
microphone body. Slide the handle away from the grille, exposing
the battery compartment. Insert a new battery (or replace the old
battery), observing the polarity marking in the compartment.
Slide the handle toward the grille, and tighten the handle by turning
it clockwise (from top).
WIND NOISE
Use the optional foam windscreen (A3WS) when using the SM94
outdoors on a windy day, indoors near strong air currents such as
air-moving equipment, or as a vocal microphone.
CIRCUIT DESCRIPTION
A block diagram of the SM94 is shown in Figure 4. The capacitor
cartridge is followed by an impedance converter stage. This stage
has an active load to obtain good load-driving capability with the
low battery voltage of 1.5 volts.
The audio signal is transformer-coupled for a balanced output to
the microphone connector. An active power supply circuit

Produkt Specifikationer

Mærke: Shure
Kategori: Mikrofon
Model: SM94-LC

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure SM94-LC stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon Shure Manualer

Shure

Shure SM58 Manual

22 Juli 2025
Shure

Shure PGA56-XLR Manual

15 Juli 2025
Shure

Shure ULXD6 Manual

23 Juni 2025
Shure

Shure MoveMic One Manual

21 Februar 2025
Shure

Shure MV7i Manual

21 Februar 2025
Shure

Shure VP89M Manual

29 December 2024
Shure

Shure PGA DRUMKIT4 Manual

29 December 2024
Shure

Shure PGA DRUMKIT6 Manual

29 December 2024
Shure

Shure Microflex MX395 Manual

29 December 2024
Shure

Shure KSM11 Manual

29 December 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Røde

Røde NT1-A 5th Gen Manual

2 August 2025
DPA

DPA 4488 Manual

1 August 2025
Godox

Godox MoveLink II Manual

31 Juli 2025
Godox

Godox WEC Manual

31 Juli 2025
Godox

Godox WES1 RX Manual

31 Juli 2025
Godox

Godox ML II-C4 Manual

31 Juli 2025
Godox

Godox VS-Mic Manual

31 Juli 2025
Zoom

Zoom SSH-6e Manual

31 Juli 2025
Sennheiser

Sennheiser Digital 6000 Manual

30 Juli 2025
JLab

JLab JBuds Talk Manual

30 Juli 2025