Siemens RDE10 Thermostaat Manual

Siemens Termostat RDE10 Thermostaat

Læs gratis den danske manual til Siemens RDE10 Thermostaat (8 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Siemens RDE10 Thermostaat, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

CE1N3035en

25.09.2003

Siemens Building Technologies

HVAC Products

3035

Room Temperature Controllers

with 7-Day Time Switch and LCD

RDE10...

for heating systems

2-position control with ON/OFF output for heating

Operating modes: normal operation and energy saving mode

7-day time switch and manual operation

Mains-powered AC 230 V (RDE10) or battery-powered DC 3 V (RDE10.1)

Use

The RDE10... is used for the control of the room temperature in heating systems.

Typical applications:

• Apartments

• Commercial spaces

• Schools

For the control of the following pieces of equipment:

• Thermic valves or zone valves

• Gas or oil burners

• Fans

• Pumps

2/8

Siemens Building Technologies Room temperature controllers CE1N3035en

HVAC Products 25.09.2003

Functions

The controller acquires the room temperature with its integrated sensor and maintains

the setpoint by delivering control commands. The switching differential is 1 K.

Q14

T[°C]

OFF W

3030D01

T Room temperature

SD Switching differential

W Room temperature setpoint

Q14 Output signal for heating

Operating modes

The RDE10... provides normal operation and, optionally, energy saving mode or OFF.

The difference between normal operation and energy saving mode is only the room

temperature setpoint. The changeover between the operating modes can be made

either automatically according to the 7-day time switch or manually with the operating

mode selector.

When normal operation is activated, symbol “ “ appears on the display. The setpoint

can be readjusted by pressing buttons , + and -.

When energy saving mode is activated, symbol “ “ appears on the display. The set-

point can be readjusted by pressing buttons , + and -.

In energy saving mode, the unit can also be switched to “Off”. This is accomplished by

selecting a setpoint of 5 °C and then keeping button - depressed for 4 seconds. In

that case, symbol ' ' does not appear.

The changeover between the operating modes can take place either automatically

() or manually ( , ), depending on the position of the operating mode selector.

When the operating mode selector is in position “ ”, changeover will take place

automatically according to the selected switching pattern. For every weekday, a specific

switching pattern can be selected.

Factory setting:

Day(s) Normal operation Energy saving mode

Mo (1) – Fr (5) 6:00 – 8:00 h and

17:00 – 22:00 h

22:00 – 6:00 h and

08:00 – 17:00 h

Sa (6) – Su (7) 7:00 – 22:00 h 22:00 – 7:00 h

The current setpoint can be temporarily readjusted by pressing

buttons + and -. The setpoint will then be reset to its initial value the next time auto-

matic or manual changeover takes place.

When the operating mode selector is set to” “ or “ “, the RDE10... will maintain

normal operation or energy saving mode respectively.

Function diagram

Normal operation

Energy saving mode

or OFF

7-day time switch

Produkt Specifikationer

Mærke:	Siemens
Kategori:	Termostat
Model:	RDE10 Thermostaat

Har du brug for hjælp?

Hvis du har brug for hjælp til Siemens RDE10 Thermostaat stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Siemens Manualer

Siemens QAF64 Manual

28 December 2024

Siemens RDG100T Manual

15 Oktober 2024

Siemens DESIGO RXA Manual

5 Oktober 2024

Siemens REV33 Manual

3 Oktober 2024

Siemens RAA31 Manual

16 September 2024

Siemens REV100 Manual

2 September 2024

Siemens Landis & Staefa REV22RF Manual

1 September 2024

Siemens RDG160T Manual

1 September 2024

Siemens RDF600KN Manual

30 August 2024

Siemens REV23M Manual

30 August 2024

Termostat Manualer

Nyeste Termostat Manualer

Tado Bridge X Manual

16 Juni 2025

Carrier ComfortVu Manual

16 Juni 2025

Mainstreet Equipment GMC-12 Manual

15 Juni 2025

Honeywell RTH21B Manual

14 Juni 2025

Tado Wireless Temperature Sensor X Manual

9 Juni 2025

Fantini Cosmi CH123E Manual

26 Marts 2025

Netatmo Smart Radiator Valve Manual

26 Februar 2025

Netatmo Smart Thermostat Manual

26 Februar 2025

Rose LM TER-9 Manual

5 Februar 2025

Rose LM TH-H Manual

1 Februar 2025