The RDE100FP rogrammer pis a with 3 "Fil Pilote" zones lectto se Comfort or Economy for different mode
zones at any time.
Note: - The Comfort setpoint must be set directly on each radiator’s thermostat
- T " he radiator’s operating mode must be set to "Automatic
Proceed as follows:
• Press Set and select
• Press Ok and the time of day flashes for setting
• Press + – or to set the time of day
• Press Ok to confirm
• W ; eekday flashes press + – or to select the weekday
• Press Ok to save
• Press M ode to exit or wait for the program to exit automatically
Note:
In the event of power failure followed by power restoration the time of day that the a , flashes means , which user
must adjust it repeat the steps from point 3 above. and
All others setting are saved.
Until the time , the program sends protection all available zones. setting made is commands to
Do you want to lock the buttons?
M Mode Press and hold ode for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but changes cannot be made.
Do you want to set your Holiday mode?
Set
Ok
+
–
M ode
!
You can enable Holiday zone mode for all s .The radiator managed by the programmer controls the room
temperature with the rotection setpoint. P
• Press Set and select
• Press Ok to confirm
• Press + – or to set s m the number of days for holiday (0 = Holiday ode Off)
• Press Ok to save
• When Holiday mode is activated, the remaining days are displayed
Note:
If M ode e .is pressed while Holiday mode is , the function active is deactivated and th symbol disappears
Energy saving tips without loss of comfort
• T Select Auto imer mode during the heating period and set the time switch as desired
• - Select Economy or Holiday mode for longer periods of non occupancy and during the summer