Sigma 30mm f1.4 EX DC HSM Manual

Sigma Linse 30mm f1.4 EX DC HSM

Læs gratis den danske manual til Sigma 30mm f1.4 EX DC HSM (1 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Sigma 30mm f1.4 EX DC HSM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Thank you very much for purchasing a Sigma Lens. In order to get the maximum

performance and enjoyment out of your Sigma lens, please read this instruction

booklet thoroughly before you start to use the lens.

DESCRIPTION OF THE PARTS (fig.1)

① Filter Attachment Thread ⑤ Focus Mode Switch

② Focus Ring (SIGMA SA / CANON AF / FOUR THIRDS)

③ Distance Scale ⑥ Mount

④ Focus Index Line ⑦ Lens Hood

DC LENS

These are special lenses that are designated for digital cameras because the lens

image circle is designated to correspond to the size of the image sensors of most

digital SLR cameras. The specialized design gives these lenses the ideal properties

for digital cameras.

◆ An image sensor element larger than those corresponding to APS-C cannot be

used in digital cameras or 35mm SLR cameras. If such an element is used

vignetting will occur on the picture surface.

◆ If you use SD14, SD10 or SD9 digital cameras, corresponding angle of view will be

51mm.

ATTACHING TO CAMERA BODY

When this lens is attached to the camera body it will automatically function in the

same way as your normal lens. Please refer to the instruction booklet for your

camera body.

◆

On the lens mount surface, there are a number of couplers and electrical contacts.

Please keep them clean to ensure proper connection. To avoid damaging the lens,

be especially sure to place the lens with its front end down while changing the lens.

◆ Many accessories such as rear mounted teleconverters, extension tubes, etc., are

specially made for designated lenses. Before you purchase such accessories,

please check your Sigma lens to determine that it is compatible and that the

accessories will function properly with it.

SETTING THE EXPOSURE MODE

The sigma lens functions automatically after mounting to your camera. Please,

refer to the camera instruction book.

FOCUSING

《FOR SIGMA AF, CANON AF, NIKON AF AND FOUR THIRDS》

This lens features Sigma’s built-in Hyper Sonic Motor (HSM). The HSM enables

quick and quiet autofocusing.

For autofocus operation, set the focus mode switch on the lens to “AF” position

(fig.2) (for Nikon AF, select the autofocus mode on your camera body) (For

Four-Thirds, select the autofocus mode on your camera body and set the focus

mode switch on the lens to the “AF” position).

If you wish to focus manually, set the focus mode switch on the lens to the “M”

position.

(for Nikon AF, select the manual focus mode on your camera body as you would do

normally) (For Four-Thirds, select the manual focus mode on your camera body and

set the focus mode switch on the lens to the “M” position). You can adjust the focus

by turning the focus ring.

◆ This lens also permits manual focusing even in the autofocus mode. With the

camera set to the One-Shot AF (AF-S) mode, you can adjust focus manually after

the lens autofocus (and stops), while the shutter button is pressed halfway. (In

the case of Four-Thirds fitting, the setting method varies depending on the camera

body. Please follow the instruction manual of your camera body.)

◆ When operating this lens in manual focus mode, it is recommended that correct

focus be confirmed visually in the viewfinder rather than relying on the distance

scale. This is due to possible focus shift resulting from extreme changes in

temperature which cause various components in the lens to expand and contact.

Special allowance is made for this at the infinity setting.

《FOR SONY AF AND PENTAX AF》

For autofocus operation, set the camera’s focus mode to AF.

If you wish to focus manually, set the camera’s focus mode to “MF” and adjust the

focus by turning the focus ring.

◆ To avoid damaging AF mechanism, please do not turn the focus ring manually

while in the autofocus mode.

◆ When operating this lens in manual focus mode, it is recommended that correct

focus be confirmed visually in the viewfinder rather than relying on the distance

scale. This is due to possible focus shift resulting from extreme changes in

temperature which cause various components in the lens to expand and contact.

Special allowance is made for this at the infinity setting.

LENS HOOD

A bayonet type detachable hood is provided with the lens. This lens hood helps to

prevent flare and ghosted images caused by bright illumination from outside the

picture area. Attach the hood and turn clockwise until it stops rotation. (fig.3)

◆ When taking photographs using the built-in flash, it is advisable to remove the lens

hood so as to avoid cutting off any of the flash output, which could cause a

shadow in the picture.

◆ In order to place the lens and hood into the storage case, you must ﬁrst remove

the hood, then replace it on the lens in the reverse position. (fig.4)

FILTER

◆ Only one filter should be used at the time. Two or more filters and/or special

thicker filters, like a polarizing filter, may cause vignetting.

◆ When using a polarizing filter with AF camera, use the “circular” type.

BASIC CARE AND STORAGE

◆ Avoid any shocks or exposure to extreme high or low temperatures or to humidity.

◆ For extended storage, choose a cool and dry place, preferably with good

ventilation. To avoid damage to the lens coating, keep away from mothballs or

naphthalene gas.

◆ Do not use thinner, benzine or other organic cleaning agents to remove dirt or

finger prints from the lens elements. Clean by using a soft, moistened lens cloth

or lens tissue.

◆ This lens is not waterproof. When you use the lens in the rain or near water, keep

it from getting wet. It is often impractical to repair the internal mechanism, lens

elements and electric components damaged by water.

◆ Sudden temperature changes may cause condensation or fog to appear on the

surface of the lens. When entering a warm room from the cold outdoors, it is

advisable to keep the lens in the case until the temperature of the lens approaches

room temperature.

TECHNICAL SPECIFICATIONS

Lens construction 7 - 7

Angle of View 45°

Minimum Aperture 16

Minimum Focusing Distance 40cm (1.31 ft)

Magnification 1:10.4

Filter Size 62mm

Dimensions Dia.×Length 76.6×59mm (3.02×2.32 in)

Weight 400g (14.1 oz)

Dimensions and weight include the SIGMA mount.

ENGLISH

The CE Mark is a Directive conformity mark of the European

Community (EC).

SIGMA (Deutschland) GmbH Carl-Zeiss-Str. 10/2, D-63322 Rödermark, F.R.GERMANY

Verkauf: 01805-90 90 85-0 Service: 01805-90 90 85-85 Fax: 01805-90 90 85-35

Produkt Specifikationer

Mærke:	Sigma
Kategori:	Linse
Model:	30mm f1.4 EX DC HSM
Vægt:	430 g
Produktfarve:	Sort
Diameter:	75.5 mm
Forstørrelse:	1:10.4 x
Længde:	59 mm
Filterstørrelse:	62 mm
Antal membranblade:	8
Antal asfæriske elementer:	7
Objektivets synsvinkel, diagonal:	45 °