Silent Knight SK-NIC-KIT Manual

Silent Knight Ikke kategoriseret SK-NIC-KIT

Læs gratis den danske manual til Silent Knight SK-NIC-KIT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Silent Knight SK-NIC-KIT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
SK-NIC-KIT Remote Mounting Kit
Product Installation Document
PN LS10171-001SK-E:B 06/22/2018 18-0229
Description
The SK-NIC-KIT is a remote mounting kit that lets you install up to two SK-NIC Network Interface cards in a single cabinet. SK-NIC-KIT
includes the SK-NIC, a small cabinet with door, cable, and mounting hardware
1.1 Compatibility
The SK-NIC-KIT is compatible with the SK-NIC Network Interface Card. It also has room for one 6815 SLC expander inside the cabinet.
1.2 Mounting
It is important to protect the SK-NIC-KIT and its contents from water. To prevent water damage, follow the mounting requirements listed below:
• Do not mount directly on exterior walls, especially masonry walls (condensation)
• Do not mount directly on exterior walls below grade (condensation)
• Protect from plumbing leaks
• Protect from splash caused by sprinkler inspection ports
• Do not mount in areas with humidity generating equipment (such as dryers, production machinery)
• Mount in an area that always remains within the following temperature and humidity range: 0° to 49° C (32° to 120° F) and 10-93% at
86°F(30°C) non-condensing.
• Mount in an indoor, dry location.
To mount the SK-NIC-KIT cabinet:
1. Remove the SK-NIC-KIT from its packing container.
2. Unlock the SK-NIC-KIT cabinet and lift up on the cabinet door to remove it.
3. Unscrewing the two mounting plate screws as shown in Figure 1.1 to remove the mounting plate.
Figure 1.1 Remove the Two Mounting Plate Screws to Expose the Cabinet Mounting Holes
NOTE: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances.
!
WARNING:
THE ELECTRONIC COMPONENTS ON THE SK-NIC AND THE FACP ARE SENSITIVE TO ELECTROSTATIC
DISCHARGE. WEAR A GROUNDING STRAP WHEN HANDLING ANY OF THE BOARDS.

Produkt Specifikationer

Mærke: Silent Knight
Kategori: Ikke kategoriseret
Model: SK-NIC-KIT

Har du brug for hjælp?

Hvis du har brug for hjælp til Silent Knight SK-NIC-KIT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Silent Knight Manualer

Silent Knight

Silent Knight PS-SA Manual

30 August 2024
Silent Knight

Silent Knight SD500-PS Manual

30 August 2024
Silent Knight

Silent Knight FFT-HSC Manual

30 August 2024
Silent Knight

Silent Knight SD500-PSDA Manual

30 August 2024
Silent Knight

Silent Knight SK-NIC-KIT Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Siemens

Siemens WQ32G28IL Manual

6 December 2025
MDT

MDT BE-TA550606.02 Manual

6 December 2025
Opticis

Opticis USC-CC32 Manual

6 December 2025
Audio-Technica

Audio-Technica AT33xMONO Manual

6 December 2025
Bosch

Bosch SPI4EMS24E Manual

6 December 2025
Fostex

Fostex P1000K Manual

6 December 2025
Advantech

Advantech UTC-124I1 Manual

6 December 2025
Anton/Bauer

Anton/Bauer Titon Micro Kit Manual

6 December 2025
Philips

Philips Zoom! DayWhite DIS130 Manual

6 December 2025
Opticis

Opticis USB-FC30AA Manual

6 December 2025