Silver 2021 Manual

Silver Symaskine 2021

Læs gratis den danske manual til Silver 2021 (50 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Silver 2021, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/50

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety

should always be followed, including the following:

(110-

120V area) or 15 watts (220-240V area).

16. The sound pressure level under normal

operating conditions is 75dB(A).

17. Please turn off the machine or unplug when

the machine is not operating properly.

18. Never place anything on the foot controller.

19. If the supply cord that fixed with foot

controller is damaged, it must be replaced

by the manufacturer or its service agent or

a similar qualified person in order to avoid

a hazard.

20. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

21. Children should be supervised to ensure

that they do not play with the appliance.

1. An appliance should never be left

unattended when plugged in.

2. Always unplug this appliance from the

electric outlet immediately after using and

before cleaning.

3. Always unplug before re-lamping. Replace

bulb with same type rated 10 watts

1. Do not allow to be used as a toy. Close

attention is necessary when this appliance

is used by or near children.

2. Use this appliance only for its intended use

as described in this manual. Use only

attachments recommended by the

manufacturer as contained in this manual.

3. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly, if it has been dropped or damaged,

or dropped into water. Return the appliance

to the nearest authorized dealer or service

center for examination, repair, electrical or

mechanical adjustment.

4. Never operate the appliance with any air

openings block. Keep ventilation openings

of the sewing machine and foot controller

free from accumulation of lint, dust, and

loose cloth.

5. Keep fingers away from all moving parts.

Special care is required around the sewing

machine needle.

6. Always use the proper needle plate, The

wrong plate can cause the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It

may deflect the needle causing it to break.

9. Switch the sewing machine off ("O") when

making any adjustments in the needle area,

such as threading needle, changing needle,

threading bobbin, or changing presser foot,

and the like.

10. Always unplug sewing machine from the

electrical outlet when removing covers,

lubricating, or when making any other user

servicing adjustments mentioned in the

instruction manual.

11. Never drop or insert any object into any

opening.

12. Do not use outdoors.

13. Do not operate where aerosol spray

products are being used or where oxygen

is being administered.

14. To disconnect, turn all controls to the off

("O") position, then remove plug from outlet.

15. Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

Read all instructions before using this sewing

machine.

This sewing machine is intended for household

use only.

DANGER

SAVE THESE

INSTRUCTIONS

- To reduce the risk of electric

shock:

WARNING - To reduce the risk of burns,

fire, electric shock, or injury to persons:

Produkt Specifikationer

Mærke:	Silver
Kategori:	Symaskine
Model:	2021

Har du brug for hjælp?

Hvis du har brug for hjælp til Silver 2021 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Silver Manualer

22 August 2024

11 August 2024

2 August 2024

2 August 2024

24 Marts 2024

5 August 2023

12 April 2023

27 November 2022

9 November 2022

4 November 2022

Symaskine Manualer

Nyeste Symaskine Manualer

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Juki MS-1261A-DWS Manual

9 August 2025