Section 1 Introduction and Safety
Introduction
Safety Rules
Thank you for purchasing this product.
The Parallel Kit is designed to connect
two inverter generators to provide twice
the power output to a load.
The manufacturer cannot anticipate every
possible circumstance that might involve
a hazard. The warnings in this manual,
and on
tags and decals affixed to the unit are,
therefore, not all inclusive. If using a
procedure work method or operating
technique that the
manufacturer does not specifically
recommend, verify that it is safe for
others. Also make sure the procedure,
work method or
operating technique utilized does not
render the equipment unsafe.
If any section of the manual is not
understood contact your nearest
authorized dealer or contac t SIMPSON
Customer Service at 1-877-362-4271.
Consult Manual Read and understand
manual completely before using
product. Failure to completely
understand manual and product could
result in death or serous injury.
Indicates a hazardous situation which,
if not avoided will result in death or
serious injury.
The owner is responsible for proper
maintenance and safe use of the
equipment. Before operating, servicing
or storing this parallel kit:
Save these instructions for future
reference ALWAYS supply this manual to
any individual that will use this machine.
THE INFORMATION CONTAINED HEREIN
WAS BASED ON MACHINES IN
PRODUCTION AT THE TIME OF
PUBLICATION. RESERVES SIMPSON
THE RIGHT TO MODIFY THIS MANUAL
AT ANY TIME.
Study all warnings in this manual and on
the product carefully.
Become familiar with this manual and the
unit before use.
Refer to the Assembly section of the
manual for instructions on final assembly
procedures. Follow the instructions
completely.
Throughout this publication, and on tags
and decals affixed to the unit, DANGER.
WARN NG, CAUTION and NOTE blocks I
are used to alert personnel to special
instructions about a particular operation
that may be hazardous if performed
incorrectly or carelessly. Observe
them carefully. Their definitions are as
follows: