Sirui K-20X Manual

Sirui Stativ K-20X

Læs gratis den danske manual til Sirui K-20X (4 sider) i kategorien Stativ. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Sirui K-20X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

2.Attaching Your Ball Head

UNC3/8"

Mounting

Screw

4.Attaching and Removing the

Quick Release Plate

3.Know your Quick Release

Clamp and Quick Release Plate

Figure 2-1 Figure 2-2

UNC3/8"

Screw Hole

Tighten

Quick Release Clamp:

Clamp Jaw

Loosen

Bubble Level

Clamp Plate

Security Pin

Clamp locking knob

Security Pin

Release Button

Quick Release Plate:

Common Plate

Tighten

Loosen

Stop

Stop Loosen Press

1.Know Your Ball Head

Friction Adjuster

Dial

Quick Release

Clamp

Main Body

Main Locking

Knob

Panning Base

Support Ball

Panning Base Locking Knob

Figure 4-1

Figure 2-2

Figure 4-3 Figure 4-4

Slide-proof Rubber Mat

KX Series:

Strap holder

Bubble Levels

Figure 3-1

Figure 3-2

1/4" screw with buckle

standard 1/4" screw

1.Know Your Ball Head

2.Attaching Your Ball Head

a.To attach the ball head onto the tripod, you must make

sure that the mounting screw of your tripod is 3/8". If it is

1/4" you will need to get a 3/8" screw or adapter.Many

professional tripods have reversible screws.Please check

your tripod manual for more details.

b.Lock the Panning Base Locking Knob by turning it in a

clockwise direction. As shown on Figure 2-1 & 2-2, align the

3/8" thread hole at the bottom of the Ball Head with the

mounting screw on the tripod. Hold by the base of the Ball

Head and rotate in a clockwise direction until it is locked

tightly.

3.Know your Quick Release Clamp and Quick Release

Plate

4.Attaching and Removing the Quick Release Plate

a.Attaching the QR Plate to Your Camera

Select the QR Plate that matches the base of your

camera.(To prevent excessive wear to the camera's tripod

socket, you should not frequently attach and remove the

Quick Release Plate. It is quite common to leave the QR

Plate permanently attached to the camera.)

The side of the Quick Release Plate with the slide-proof

rubber mat must be facing the base of the camera. Make

sure the QR Plate screw aligns with the tripod socket on the

bottom of the camera.

Position the QR plate on the camera body and tighten the

screw with a coin or allen key. If you plan to keep the quick

release plate on your camera for a long period of time or you

are using medium or large format cameras, you should

tighten the screw with the allen key.

b.Attaching the camera with QR Plate onto the Ball Head

Slightly loosen the Clamp Locking Knob by turning it

counter-clockwise, slide the QR plate laterally into the Quick

Release Clamp (Figure 4-1) and tighten the clamp by turning

clockwise. Another method is to fully open the Clamp

Locking Knob and place the plate in from the top (Figure 4-

2). Tighten the knob to lock the camera in place.

c.Security Pin on the Quick Release Clamp

There is a safety lock on the top of the Quick Release Clamp

that effectively prevents the camera from sliding off of the

clamp if it is slightly loosened (Figure 4-3). This allows you to

make minor adjustments of the camera position on the Ball

Head without worrying about the camera sliding off of the

Quick Release Clamp. This feature is available with all Sirui

QR plates. (Warning: While other styles of QR plates can be

used on Sirui Ball Heads, this safety feature may not be

available with other brands of QR plates. Even with the Sirui

QR Plates,you should hold your camera while loosening the

Quick Release Clamp).

d.Removing the Camera with QR Plate from the Ball Head

While holding the camera, loosen the Clamp Locking Knob

by slightly turning it counter-clock-wise. Push in the

Security Pin Release Button and slide the camera off of the

Clamp Plate (Figure 4-4). You can also remove the camera

by fully opening the clamp and lifting the camera out of the

clamp.

KX B H Series all ead

INSTRUCTIONS

Professional Photographic Equipment

Address: The Third ndustrial District,Wuguishan Town,Zhongshan City,Guangdong,China

E-mail: info@sirui-photo.com http://www.sirui-photo.com http://www.zssirui.com

Tel: 0086-760-88897373 Fax: 0086-760-88207062 P.C: 528458

Service Hotline: (0086)400 830 2299

SIRUI Photographic Equipment Industry(Zhongshan) CO.,Ltd

K 10X-

K-20X

K-30X

K-40X

0.35/0.77

0.4/0.88

0.5/1.10

0.8/1.76

20/44.1

25/55.1

30/66.1

35/77.2

Diameter

mm/inch

Weight

kg/lb

Maximum

Load

kg/lb

KX Series Ball Head Data Char t

Height

mm/inch

93/3.7

98/3.9

106/4.2

124/4.9

33/1.3

38/1.5

44/1.7

54/2.1

Produkt Specifikationer

Mærke:	Sirui
Kategori:	Stativ
Model:	K-20X
Højde:	98 mm
Vægt:	400 g
Produktfarve:	Sort
Materiale:	Aluminium
Diameter:	38 mm
Maksimal vægtkapacitet:	25 kg
Trefods-hovedtype:	Kuglehoved
Vedhæftelse:	Universel "