Smart-AVI NET-IP-PROS Manual

Smart-AVI Server NET-IP-PROS

Læs gratis den danske manual til Smart-AVI NET-IP-PROS (2 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Smart-AVI NET-IP-PROS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
USER MANUAL
NET-IP-PRO
CONTROL MOST SMARTAVI MATRIX
SWITCHES FROM ANYWHERE IN
THE WORLD
ETHERNET/RS232
SERVER
INITIAL SETUP FOR NET-IP-PRO
1. Once connected to the NET-IP-PRO, you will see
Administration
Device Config
Input/Output Select
Network Settings
Admin Password
Update Firmware
Web Console
Web Telnet
Logout
For the initial setup, click the Network
Network
Network
Network Network Settings
Settings
Settings
SettingsSettings
button and manually assign an IP address to the
NET-IP-PRO. This will assure that the NET-IP-PRO
will always have the same IP address.
Note: Be sure to choose an address that will not
conflict with any other devices on the network, and
that the address is not in the range of the DHCP
server.
2. Once you have manually assigned an IP address,
the NET-IP-PRO must be restarted before it will be
accessible at that IP address.
4. It is also recommended that you set a password
for the NET-IP-PRO at this point. To change the
password (and/or username) of the web interface,
click on the button. Enter the
Admin
Admin
Admin
Admin Admin Password
Password
Password
PasswordPassword
new password and click . This sets theSubmit
password for the HTTP interface only.
5. After the password has been changed, the system
will automatically log the user out, so be ready to
enter your new password soon after changing it if
you want to access the system.
800.AVI.2131
Tel: (818) 503-6200 Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
NET-IP-PRO has been tested with the
Chrome and Firefox web-browsers.
Internet Explorer is not supported.
Internet Explorer is not supported.
Internet Explorer is not supported.
Internet Explorer is not supported.Internet Explorer is not supported.
NOTICE
The information contained in this document is subject
to change without notice. SmartAVI makes no warranty
of any kind with regard to this material, including but
not limited to, implied warranties of merchantability
and fitness for particular purpose.
SmartAVI will not be liable for errors contained herein
or for incidental or consequential damages in connec-
tion with the furnishing, performance or use of this
material.
No part of this document may be photocopied, repro-
duced, or translated into another language without
prior written consent from SmartAVI Technologies, Inc.
INTRODUCTION
The NET-IP-PRO is an RS-232 control module that
allows most SmartAVI switching matrixes to be con-
trolled remotely via HTTP or TELNET. Manage the
switching functions of your matrix with ease from
anywhere in the world. With the NET-IP-PRO you can
save up to 10 preset input/output configurations for
easy access. TELNET access provides transparent
command control of your matrix, perfect for use with
automated third-party control software.
FEATURES
Supports HTTP and TELNET control
10/100 Ethernet Interface
Up to 10 user-definable configurations
Password Protected
Up to 5 Users can Control the Matrixes
IP Configuration via TCP/IP and RS-232
Flexible control of several types of matrixes
APPLICATIONS
Server Collocation
Digital Signage
Airports
Dealer Rooms
Control Rooms
Audio/Visual Presentations
Hotels/Resorts
WHAT’S IN THE BOX?
1. Power off all devices.
2.
Using a CAT5 cable, connect the NET -IP-PRO to your local network.
3. Connect your SmartAVI device using the included RS-232 male-to-male cable.
4. Plug the power into the NET-IP-PRO.
5. After applying power, wait for about 30 seconds then run one of the discovery tool applications
(mentioned below) to connect to the NET-IP-PRO web interface or telnet application.
The first discovery tool, called , will open up a small console application that will display the IPdetect
address of the NET-IP-PRO. After obtaining the IP address connect to the device with the web applica-
tion of your choice by typing that IP address in the web browser or connect through telnet on port 23.
An alternative option is to use . This program will find the IP address of the NET-IP-PRO anddetect_gui
then open up a web browser to the NET-IP-PRO web interface.
6. Open a web browser and navigate to the IP address that is indicated. You will be prompted to enter a
username and password.
7. To access the web interface of NET-IP-PRO, log in with the following information:
User ID: admin
Password: admin
INSTALLATION DIAGRAM
PART NO. QTY. DESCRIPTION
NET-IP-PRO
1
NET-IP-PRO Device
PS5VDC2A 1 5VDC2A Power Supply
CCRS232MM06 1 Serial male to male cable
CONNECTING THE NET-IP-PRO

Produkt Specifikationer

Mærke: Smart-AVI
Kategori: Server
Model: NET-IP-PROS

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI NET-IP-PROS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Server Smart-AVI Manualer

Smart-AVI

Smart-AVI NET-IP-PROS Manual

25 December 2024
Smart-AVI

Smart-AVI E300 Manual

31 August 2024

Server Manualer

Nyeste Server Manualer

Ibm

Ibm eServer xSeries 346 Manual

13 September 2025
Ibm

Ibm BladeCenter HS23 Manual

13 September 2025
Ibm

Ibm eServer System x3850 X5 Manual

13 September 2025
Ibm

Ibm eServer xSeries 445 Manual

13 September 2025
Ibm

Ibm System x x3690 X5 Manual

13 September 2025
Ibm

Ibm eServer xSeries 206 Manual

13 September 2025
Ibm

Ibm xSeries 365 Manual

13 September 2025
Ibm

Ibm System x x3650 M3 Manual

13 September 2025
Ibm

Ibm System x3650 M3 Manual

13 September 2025
Ibm

Ibm System x x3950 X5 Manual

13 September 2025