Smart-AVI SX-RX200S Manual

Smart-AVI Skifte SX-RX200S

Læs gratis den danske manual til Smart-AVI SX-RX200S (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Smart-AVI SX-RX200S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance or use

of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

Uses a single CAT5 to extend

Keyboard, Mouse, Video and Audio

to a remote location up to 500 ft.

SX-200

www.smartavi.com

User Manual

3111 Winona Ave., Suite 101

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

3MART!UDIO6IDEO)NTEGRATION

snoitacificepS002-XS

langiS eulB,neerG,deR:langisgolanA

smhO57p-pV7.0

/noituloseR

ecnatsiD

;tf058006x008;tf0001084x046

;tf0064201

x0021;tf007867x4201

.tf0650021x0061

cnyS elbitapmocLTTlacitreVdnalatnoziroH

htdiwdnaB zHM003

draobyeK elbitapmo

C2/SPdradnatS

esuoM elbitapmoC2/SPdradnatS

oiduA tekcoskcajmm5.3decnalabnUoeretS

rewoP A1CDV5

lacisyhP

snoisnemi

HxDxW

)ni81.1x45.6x92.4(mm03x661x901

thgieW )bl62.1(gk75.

erusolcnE

lairetaM

munimulA

Introduction

The SX-200 is a combination of transmitter and

receiver devices designed to allow access to the PC

from a keyboard, mouse, and monitor at a remote

location up to 500 ft. away. The extension is

accomplished over a single CAT5 cable.

Features

Provides remote access to the PC with keyboard,

mouse and monitor.

Uses a single CAT-5 UTP cable to reduce

installation costs.

Extends signal to a maximum distance of 500ft.

Supports all PC/AT and PS/2 keyboards with

full emulation.

Caps Lock, Num Lock, and Scroll Lock are

automatically saved and restored.

Supports full emulation and conversion on all

PC/AT and PS/2 mice.



Compatible with Windows, NT, OS/2, UNIX,

Linux, and other operating systems.

Supports computer monitors with resolution of

up to 1600x1200.

Offers adjustable cable compensation.

Compact metal enclosure.

Supports stereo audio.

What’s in the box?

SX- 20 0SX- 20 0

SX- 20 0

Please check the contents of the package before

beginning installation.

Installation Diagram

Installation Instructions

System Power UpSystem Power Up

System Power Up

1. Connect the 5 Volt power supply to the transmitter

2. Turn the system on by plugging in the power adapter,

if it is not yet connected.

3. Power up your computer.

4. Observe to see if both transmitter and receiver power

LEDs are ON, and computer has finished the boot

up process.

5. Observe monitor at receiver end to see if signal is

going through.

tnetnoCegakcaP002-XS tnetnoCegakcaP002-XS

tnetnoCegakcaP002-XS

tnetnoCegakcaP002-XS tnetnoCegakcaP002-XS

ytQ ytQ

ytQ

ytQ ytQ noitpircseD noitpircseD

noitpircseD

noitpircseD noitpircseD rebmuNtraP rebmuNtraP

rebmuNtraP

rebmuNtraP rebmuNtraP

1 rettimsnarT002-XS 002XT-XS

1 revieceR002-XS 002XR-XS

2 ylppuSrewoP1 SU-A1D5-SP

1 elbaCMVK 60-MMMVK-CC

seirosseccAlanoitpO seirosseccAlanoitpO

seirosseccAlanoitpO

seirosseccAlanoitpO seirosseccAlanoitpO

1 elbaCoiduAoeretSmm5.3 60-MMAMM-CC

Before you power up, ensure that all cables are properly

connected as shown in the diagram below.

Quickstart

1. Connect the video out, keyboard and mouse ports

on your computer to the transmitter using the

supplied KVM and audio cables.

3. Connect a power adapter to the transmitter and

the receiver.

4. Connect a CAT5 cable to the transmitter and run it

over to the receiver.

5. Connect peripherals to the receiver. I.E. keyboard,

mouse, monitor, and optional serial device.

6. Once everything is connected power up your

computer and the SX-200 units.

Produkt Specifikationer

Mærke:	Smart-AVI
Kategori:	Skifte
Model:	SX-RX200S

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI SX-RX200S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Smart-AVI Manualer

Smart-AVI SM-MST-2D Manual

7 Januar 2025

Smart-AVI SM-DVN-84X Manual

7 Januar 2025

Smart-AVI HDN-4PLUS-S Manual

28 December 2024

Smart-AVI SX-RX200S Manual

28 December 2024

Smart-AVI RK-DVX2U-A-RX8S Manual

28 December 2024

Smart-AVI RK-DVX2U-A-RX4S Manual

28 December 2024

Smart-AVI SX-RX500S Manual

28 December 2024

Smart-AVI SDX-PLUS-RX Manual

28 December 2024

Smart-AVI HDN-8P Manual

28 December 2024

Smart-AVI HDMV-PLUS Manual

25 December 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025