Smart-AVI USB-100S Manual

Smart-AVI Wifi repeater USB-100S

Læs gratis den danske manual til Smart-AVI USB-100S (2 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Smart-AVI USB-100S, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
© Copyright 2008 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
The USB-100 extends USB up to 275ft from the
computer using a single un-shielded CAT5 cable.
USB100
www.smartavi.com
User Manual
2840 N. Naomi Ave.
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Technical Specifications
USB-100 Specifications
CAT5 (UTP) Maximum range 275ft (85m)
USB Data Data Rate of 12Mbps
Compatible with USB version 1.1
USB Connectors USB-TX100 Type A
USB-TX100 Type B
Power 5V DC@1A Internal
Dimensions (inches) 3.375” x 2.375” x 1”
Weight 0.14 lbs
S M A R T A U D I O V I D E O I N N O V A T I O N
Qty Description Part Number
1 USB-100 Transmitter USB-TX100
1 USB-100 Receiver USB-RX100
1 6’ USB A-B Cable CCUSBAB06
The USB-100 extends USB up to 275ft using a single
unshielded CAT5 cable with data rates up to 12Mbps.
Introduction
Extends USB port up to 275 feet from the •
computer.
Uses easy to install, inexpensive CAT5.•
Fully compliant with USB 1.1 specifications.•
Supports 1.5 and 12 Mbps data rate.•
Uses a single CAT5 UTP cable between transmitter •
and receiver.
Bus powered transmitter unit•
Fully transparent (does not use any emulation).•
Compact size.•
Supports MAC, PC and SUN.•
Plug and play.•
Features
What’s in the box?
USB-100
Please check the contents of the package before
beginning installation.
Installation and Operation
Connecting the Transmitter
1. Connect the transmitter to the host using the A-B
USB cable (included with the unit).
2. The A side of the connector would go to the com-
puter host and the B side would be connected to
the transmitter.
Note: You must connect the included USB-Hub to the
receiver unit for the system to work properly.
3. Connect the receiver to the peripheral device using
the included USB-Hub.
4. Join the USB-100 units using standard CAT5 UTP
cable.
Note:
The receiver provides remote power up to 500
mA to the connected peripherals. This power comes
from the host computer and is passed by the transmitter
to the receiver. In some applications, and external power
supply is required. SmartAVI can provide a power supply
for such cases with the receiver and transmitter units.
(optional)

Produkt Specifikationer

Mærke: Smart-AVI
Kategori: Wifi repeater
Model: USB-100S

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI USB-100S stil et spørgsmål nedenfor, og andre brugere vil svare dig


Wifi repeater Smart-AVI Manualer

Smart-AVI

Smart-AVI USB-100S Manual

31 August 2024
Smart-AVI

Smart-AVI USB2Pro Manual

31 August 2024

Wifi repeater Manualer

Nyeste Wifi repeater Manualer

SIIG

SIIG JU-EX0311-S1 Manual

8 Juni 2025
Cudy

Cudy RE3600 Manual

6 Juni 2025
Evga

Evga 100-2W-0027-LR Manual

29 Marts 2025
Evga

Evga 100-2W-0028-LR Manual

29 Marts 2025
Strong

Strong Repeater 300 V2 Manual

31 Januar 2025
Paxton

Paxton 477-901-US Manual

29 Januar 2025
Paxton

Paxton Net2Air Bridge Manual

29 Januar 2025
D-Link

D-Link E30 Manual

23 Januar 2025
Manhattan

Manhattan 525664 Manual

12 Januar 2025
D-Link

D-Link DMG-112A Manual

5 Januar 2025