SmartAVI SDX-RX4P Manual

SmartAVI Skifte SDX-RX4P

Læs gratis den danske manual til SmartAVI SDX-RX4P (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om SmartAVI SDX-RX4P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER MANUAL

SDX-4P

EXTEND QUAD DVI-D, QUAD RS232,

USB KEYBOARD, MOUSE AND AUDIO

UP TO 400 FEET OVER FOUR

CAT5/5E/6 CABLE

VIDEO

Format (4) DVI-D Single Link

Maximum Pixel Clock 165 MHz

Input Interface (TX) (4) DVI-D 29-pin (Female)

Output Interface (RX) (4) DVI-D 29-pin (Female)

Resolution Up to 1920x1200 @60Hz

and

3840x2160 @30Hz

DDC 5 volts p-p (TTL)

Input Equalization Automatic

DVI-D Cable Max Length Up to 20 ft.

Output DVI-D Cable Length Up to 20 ft.

RS232

Input Interface (2) DB9 (Female)

Output Interface (2) DB9 (Male)

Speed Up to 115 Kbps

OTHER

Power Internal 100-240 VAC/5VDC4A

@20W

Dimensions 17 in W x 1.7 in H x 3.2 in D

Weight 4 lbs.

Operating

Temp.

0-55 °C (32-131°F)

Storage Temp. -20-85 °C (-4-185 °F)

Humidity Up to 95%

Signal Type Stereo Audio

Bandwidth 15MHz, 0dB

Impedance 100 Ohm

Connector 3.5 mm jack, Female

AUDIO

TECHNICAL SPECIFICATIONS

SUPER RANGE HDBaseT

QUAD DVI-D, DUAL RS232,

AUDIO, AND USB

KEYBOARD AND MOUSE

EXTENDER

USB

Signal Type USB 1.1 (Keyboard and

Mouse Only)

Input Interface (TX) (1) USB Type B (Female)

Output Interface (RX) (2) USB Type A (Female)

RECEIVE ON DB9 MALE

PIN # NAME DESCRIPTION

2 RxD Receive Data on DB9 Male

3 TxD Transmit Data on DB9 Male

5 SGND Ground

PIN # NAME DESCRIPTION

2 TxD Transmit Data on DB9 Female

3 RxD Receive Data on DB9 Female

5 SGND Ground

TRANSMIT ON DB9 FEMALE

PREPARING AND CONNECTING SYSTEM

CAT5 CABLE

Following is the wiring standard for terminating CAT 5

cable using RJ-45 connector:

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

Connectors: RJ-45

Capacitance: 14 pf/ft (46.2 pf/m)

Conductor Gauge: 24 AWG

Impedance: 100 +/- 15 ohms

800.AVI.2131

Tel: (818) 503-6200 Fax: (818) 503-6208

11651 Vanowen St. North Hollywood, CA 91605

SmartAVI.com

Designed and Manufactured in the USA

INTRODUCTION

Using HDBaseT technology, the SDX-4P DVI extender

is capable of sending quad DVI-D signals up to 400

feet over two conventional and inexpensive

CAT5/5e/6 cable. HDBaseT technology is superior to

older DVI extenders that require special CAT6

shielded cable to go a short distance.

The SDX-4P also has USB keyboard and mouse,

audio and RS232 extension, giving you the ability to

control your displays or devices remotely.

FEATURES

• Extends quad DVI-D up to 400 feet (120m) from

the source

• HDCP Support

• Supports up to 1920x1200 resolution @ 60Hz.

• Supports 4k/2k (3840x2160) resolution @ 30Hz.

• Automatic EDID Learning

• USB Keyboard and Mouse extension

• Uncompressed Video using HDBaseT

• RS-232 extension allows for remote control of

displays

• Supports Stereo Sound

• Compatible with Windows, Mac and Linux Operat-

ing Systems

To reach maximum distances

with HDBaseT technology, it

is recommended to use the

best possible quality cable

available. CAT5e/6 shielded

cabling is ideal for best

performance.

PART NO. QTY DESCRIPTION

SDX-4P-RX 1 SDX-4P Receiver. Quad DVI-D,

Dual RS232, USB & Audio

Receiver over CAT5/5e/6

SDX-4P-TX 1 SDX-4P Transmitter. Quad DVI-

D, Dual RS232, USB & Audio

Transmitter over CAT5/5e/6

Power

Supply

2 PS5VDC4A

WHAT’S IN THE BOX?

CONNECTING THE SDX-4P

1. Power off all devices.

2. Connect four DVI-D sources from the computer to the four DVI-D input ports on the back of the SDX-4P-TX.

3. Connect the computer’s USB port to the USB port on the SDX-4P-TX using a USB male (A-to-B) cable.

4. Connect the computer’s stereo audio output to the audio input port of the SDX-4P-TX using a 3.5 mm (1/8 in)

stereo audio cable.

5. Optionally connect RS-232 from a computer for control functions.

6. Connect Links 1 to 4 of the SDX-4P-TX to Links 1 to 4 of the SDX-4P-RX using four CAT5/5e/6 cables.

7. Connect a DVI-D compatible display to each of the four DVI-D ports on the back of the SDX-4P-RX.

8. Connect a USB keyboard and mouse to the USB ports on the SDX-4P-RX.

9. Optionally connect RS-232 to an RS-232 enabled device for control functions.

10.Connect power cables to the SDX-4P-RX and the SDX-4P-TX and turn both units on.

11.Power on all the displays and then the computer.

The EDID of your displays will be learned automatically.

The EDID of your displays will be learned automatically.The EDID of your displays will be learned automatically.

The EDID of your displays will be learned automatically.

APPLICATION DIAGRAM

SDX-4P-TX FRONT

SDX-4P-RX FRONT

SDX-4P-TX BACK

SDX-4P-RX BACK

Produkt Specifikationer

Mærke:	SmartAVI
Kategori:	Skifte
Model:	SDX-RX4P

Har du brug for hjælp?

Hvis du har brug for hjælp til SmartAVI SDX-RX4P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte SmartAVI Manualer

SmartAVI RK-DVX2U-RX4S Manual

21 August 2024

SmartAVI DVX-UTRX Manual

21 August 2024

SmartAVI LDX-4P-RX Manual

20 August 2024

SmartAVI DPN-4 Quad Manual

20 August 2024

SmartAVI SDX-RX4P Manual

20 August 2024

SmartAVI VNET+4PS Manual

19 August 2024

SmartAVI KDX-TX200S Manual

19 August 2024

SmartAVI RK-DVX2U-A-RX4S Manual

19 August 2024

SmartAVI VNET+8PS Manual

19 August 2024

SmartAVI HDN-4PLUS-S Manual

18 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025