SMK-Link Blu-Link VP3150 Manual

SMK-Link Højttaler Blu-Link VP3150

Læs gratis den danske manual til SMK-Link Blu-Link VP3150 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om SMK-Link Blu-Link VP3150, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Congratulations on your purchase of

the Blu-Link

™

NFC Speaker System 80.

Whether you’re using an Apple

iPhone

iPad

, Samsung

Galaxy S

or other

popular Bluetooth

-enabled smartphone

or tablet, the Blu-Link

™

NFC Speaker will

put your favorite music just a touch away.

User’s Guide

Notes

NOTICES & WARNINGS

• Please read this user manual and the user manual of your

compatible mobile device before using this product.

• This product may contain small parts. Keep

out of the reach of small children.

• Battery Charging Hazards:

○Only charge the battery in accordance with

the user instructions supplied.

○ Do not dispose of your speaker in re. The battery

could explode causing severe injury or death.

○Do not attempt to disassemble the speaker charger or force

open the built-in battery as it may result in electric shock.

○Do not charge the speaker in damp areas or in extremely high

or low temperatures as this may result in electric shock.

○Do not clean the speaker when it is being charged or used.

FCC Statement

This equipment has been tested and found to comply with the limits for

a class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables

must be used with this equipment. Operation with non-approved

equipment or unshielded cables is likely to result in interference to

radio and TV reception. The user is cautioned that changes and

modications made to the equipment without the approval of manufacturer

could void the user’s authority to operate this equipment.

SMK-Link Electronics, Inc.

3601-B Calle Tecate, Camarillo, CA 93012

(888) 696-3500

www.smklink.com

Link are trademarks or registered trademarks of SMK-Link Electronics, Inc.

Bluetooth and the Bluetooth logo are trademarks or registered trademarks

of the Bluetooth SIG. Apple, iPhone, iPod, and iPad are registered

trademarks of Apple Inc. Samsung and Galaxy S are both registered

trademarks of Samsung Electronics Co., Ltd. All other trademarks and

registered trademarks are properties of their respective owners.

Pairing with NFC-enabled devices such as the Samsung

Galaxy S

and

other smartphones and tablets is easy. Simply tap the top of the speaker with

your device to instantly pair the Blu-Link

™

NFC Speaker.

1. Powering On

Turn speaker on by pressing and holding the Power Button on the back

of the speaker until the audio indicator light ashes.

2. Pairing

After turning on your device’s NFC setting, tap your device’s NFC tag

with the speaker’s NFC area (Top side of the speaker).

3. Controlling Volume Or Play / Pause

While playing music, you can control the volume or play/pause with

either the speaker or the device.

4. Use Your Blu-Link

™

Nfc Speaker As A Speakerphone

Press the phone icon on the control panel to receive or end a call.

5. Disconnecting And Turning Off The Speaker

Tap the device’s NFC tag with the speaker’s NFC tag again

to disconnect. When turning off the speaker, press and

hold the power button for 5 seconds. You will then hear

the indication sound and the LED light will turn off.

Pairing With Your Phone or Tablet - NFC Enabled Devices

Pairing Button

Charging LED Indicator

Micro USB Charging Port

Pairing With Your Bluetooth

Phone or Tablet Using the Audio Input Jack

Pairing with Bluetooth

-enabled devices such as the

Apple

iPhone

and iPad

just takes seconds:

1. Turn speaker on by pressing and holding the Power Button

on the back of the speaker until the audio indicator light

ashes.

2. Press and hold the Pairing Button until the speaker “beeps.”

3. Turn on your device’s Bluetooth

wireless.

4. Search for “NFC Speaker 80” and connect.

5. Control your music volume or play/pause using either the

speaker controls or those on your device.

6. To disconnect the Blu-Link

™

NFC Speaker from your phone

or tablet, simply disable the Bluetooth

connection on your

device or manually turn the speaker off by pressing and

holding the power button for 5 seconds.

To establish a wired connection with the Blu-Link

™

NFC Speaker,

connect a standard mini 3.5mm stereo audio cable from the

audio input jack on the back of the speaker to your device .

About Your Blu-Link™ NFC Speaker System 80

1. Volume up

2. Play / Pause

3. Speakerphone

4. Volume down

5. Pairing button

6. Bass tube

7. Micro USB charging connector

8. Power button

9. 3.5mm audio input jack

10. NFC Tag - Touch this area to

pair the speaker using NFC

11. Bluetooth

status indicator

/ Battery status indicator /

Bluetooth

pairing indicator

Charging The Battery

1. Plug the USB charging cable into your mobile device’s USB/AC adaptor

and the adaptor into an AC outlet. Connect the other end of the USB cable

to your speaker’s Micro USB Charging Connector.

2. When the battery is fully charged and the charger indicator

has gone off, disconnect the charger from the speaker before

you remove the AC adapter from the wall outlet.

You can also use a compatible USB cable to charge the

battery by connecting to a powered USB hub.

*When the Blu-Link

™

NFC Speaker battery is running low, the speaker will

quickly beep 4 times. Charge the battery using the steps above.

On - Not Paired

Flashes once approximately

every 5 seconds.

Pairing Mode

Flashes four times approximately

every second.

On - Paired - Not Playing Audio

Flashes twice approximately

every 5 seconds.

On - Playing Bluetooth Audio

Solid Blue

LED Status Indicator for Pairing Key

Produkt Specifikationer

Mærke:	SMK-Link
Kategori:	Højttaler
Model:	Blu-Link VP3150

Har du brug for hjælp?

Hvis du har brug for hjælp til SMK-Link Blu-Link VP3150 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler SMK-Link Manualer

SMK-Link Blu-Link VP3150 Manual

20 Juli 2025

Højttaler Manualer

Nyeste Højttaler Manualer

OSD Audio ACE670 Manual

20 Juli 2025

FoneStar PAR-BE60L Manual

20 Juli 2025

FoneStar SKY-6T Manual

20 Juli 2025

FoneStar BUBBLE-20 Manual

20 Juli 2025

FoneStar SONORA-5TN-EN Manual

20 Juli 2025

FoneStar SCI-760P Manual

20 Juli 2025

FoneStar SONORA-5AN Manual

20 Juli 2025

FoneStar FOG-9LED Manual

20 Juli 2025

FoneStar MC-2150 Manual

20 Juli 2025

FoneStar ACADEMY-1 Manual

20 Juli 2025