Sonero X-AOC210-300 Manual
Sonero
Kabler til pc'er og periferiudstyr
X-AOC210-300
Læs gratis den danske manual til Sonero X-AOC210-300 (16 sider) i kategorien Kabler til pc'er og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Sonero X-AOC210-300, eller vil du spørge andre brugere om produktet?
Side 1/16
X-AOC210Version 1.0 | 2021
HDMI 4K@60Hz AOC Cable
Instruction Manual | X-AOC210 Series
EN
2
HDMI 4K@60Hz AOC CABLE
TABLE OF CONTENTS
CHAPTER PAGE
Introduction 3 .............................................................................................
Intended Use 3 ............................................................................................
Safety Instructions ............................................................................. 4 - 5
Delivery content 5 .....................................................................................
Features 6 .....................................................................................................
Application 7 ...............................................................................................
Specications ..................................................................................... 7 - 9
Mechanical properties and Environmental performance 7 ��������
Specications ������������������������������������������������������������������������������������������������� 8
Environmental Conditions 9 �����������������������������������������������������������������������
Cross Section 9 ...........................................................................................
Construction 9 ����������������������������������������������������������������������������������������������������
Cable Construction 9 ��������������������������������������������������������������������������������������
Operation and connection diagram .......................................... 10 - 11
Troubleshooting 11 ...................................................................................
Maintenance 12 .........................................................................................
Cleaning 12 .................................................................................................
Warranty and Liability 13 ........................................................................
CE Conformity 14 .......................................................................................
Disposal of the Device 14 ........................................................................
Disclaimer 15 ..............................................................................................
3
INTRODUCTION
Thank you for purchasing the Fiber Optic HDMI 4K@60Hz AOC
Cable.
This Cable allows you to transmit HDMI signals to a distance
of up to 100m without external power supply. This cable is a
hybrid cable containing both ber optic and copper cores. Our
HDMI Active Hybrid Cable is the most competitive long distance
HDMI interconnection solution on the market. It supports
a maximum data rate of 6Gbps per channel, is light weight,
exible, and has an ultra-small xed installation bending radius
of 45mm.
With our advanced optical engine embedded the HDMI Hybrid
Cable provides full HDMI signal integrity.
INTENDED USE
This product is intended for indoor use only. Do not use it
outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild
and/or modify this product. If you use the product for purposes
other than those described above, the product may be dam-
aged. In addition, improper use can cause hazards such as short
circuiting, re, electric shock etc.
Read the instructions carefully and keep them. Make this prod-
uct available to third parties only together with its operating
instructions.
4
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially
observe the safety information. If you do not follow the
safety instructions and information on proper handling in
this manual, we assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the
warranty/ guarantee.
The device is not a toy. Keep it out of the reach of children and
pets.
The minimum bending radius of the hybrid cable is
approximately 45mm, bending the cable to a smaller radius will
irreversibly destroy the cable.
Pay attention to trip hazards; make sure that the cable is
installed safely.
Do not leave packaging material lying around carelessly. These
may become dangerous playing material for children.
Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, ammable gases, vapors
and solvents.
Do not place the product under any mechanical stress.
If it is no longer possible to operate the product safely, take it
out of operation and protect it from any accidental use.
7
APPLICATION
This product is for example applicable to:
• Digital Signage
• LED Signboards
• Home Theater
• Blu-ray, 3D Video, Projector, Set-top box, DVR, Game Consoles
and Computer
• TV Broadcast Station
• Conference Room
• Video Equipment
• Security Systems
... and more
SPECIFICATIONS
Mechanical properties and Environmental performance:
Item Units Specied values
Crush resistance
(Long-term)
N/100mm 300
Minimum bending radius
(dynamic)
mm 20 D*
Minimum bending radius
(static)
mm 10 D*
*D = the diameter of the cable body, in this case it is 4.5mm
8
Specications:
Item Description
Units Transmitter (Source) Receiver (Display)
HDMI Version HDMI 4K@60Hz, Fully Support bi-directional
EDID and HDCP communication
HDCP1.4/2.2 pass through ,Audio, CEC, support
HEC&ARC
Video Bandwidth 18Gbps - 6 Gbps pro Kanal + Clock
Supported
Resolution & Distance
Max. resolutions: 2160p60 4:4:4 8/10bit
PC: WUXGA 1920x1200 up to 100 meters
HDTV: 480p, 720p, 1080i and 1080p deep
color, 4K (60P), 3D Full HD 1920x1080 up to
100 meters
O/E Converter 4 channel 850 nm
VCSEL array
4 CH GaAs PD array
Connector Type HDMI Typ A
Cable Type Hybrid type with OM3 ber and copper wire
Cable Outer Diameter 4.5 mm
Jacket Outer Material PVC
Dierential Input 100 Ohm
Power Consumption 250 mW (max.)
Power Supply Non external power required
Passive Power Supply 4.75-5.5 V
9
Environmental Conditions
Operating Temperature: -10 – 50 °C
Storage Temperature: -20 – 60 °C
Relative Humidity: 10 – 80 %RH
CROSS SECTION
Construction:
Hybrid cable, ber (high speed data) & copper (low speed
signals)
Cable construction:
4 ber cores and 7 cooper conductors
Cable jacket: PVC / TPU,
Diameter: ~ 4.5mm
Connector dimensions: ~ 39x 20 x 9 mm
Connector material: Zinc Alloy
Aluminum foil
and mylar
Aramid yarns
Insulating layer
Copper
Fiber
Aluminum foil
Sheath
10
OPERATION AND CONNECTION DIAGRAM
Attention:
The X-AOC210 series is designed for use with the +5V passive
power, supplied through pin 18 on the HDMI connection from
the source device. This +5V connection, as well as powering the
internal ber optic module, is also carried through to the other
sink via a full standard copper connection. Please make sure, that
the source device is capable of delivering more than 500mA.
This cable can only be used in one direction. The connectors are
marked with “SOURCE” and “DISPLAY”. Each connector must be
plugged into the correct port to avoid signal loss.
Before using this cable, please make sure that all devices which
will be connected with the AOC HDMI Cable are shut down and
without power.
Then you can start to connect the “source side” of the HDMI plug
to the transmitter and connect the “display side” of the other
HDMI plug to the receiver/display.
This works without additional power supply.
We do not recommend using any intermediate cables or
adapters between the connections, as the signal transmission
performance maybe attenuated.
Switch on the power of the device of the HDMI source and the
display.
11
Connect to
Source
Connect to
Display
If the system does not work properly, see trouble shooting guide in
next section.
TROUBLESHOOTING
The Display shows:
• A black screen
• Screen is distorted
• Noise interference
1. Check that the connectors are in the correct ports of the
source and sink devices – check the labels on the connector
housing to be sure.
2. Ensure that the HDMI plugs are rmly inserted into the
HDMI source and display.
3. Check if the HDMI source and display are powered on and
properly booted.
4. Reset the system by unplugging and re-plugging the source
or display HDMI port.
5. Re-boot the system with the optical HDMI cable system
reconnected.
12
MAINTENANCE
There are no components located inside the product you need to
maintain. Never open/dismantle the product.
Maintenance, modications and repairs are to be performed
exclusively by an expert or at a qualied shop.
If you have questions which remain unanswered by these oper-
ating instructions, contact our technical support service or other
technical personnel.
CLEANING
Before cleaning the product it must be disconnected from all
other connected products.
Do not use abrasive or solvents or any aggressive cleaning
agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
To clean the product, a dry, soft and clean cloth is sucient. Do
not apply too much pressure to the housing as this may cause
scratch marks. You can easily remove dust using a long-haired,
soft and clean brush.
13
WARRANTY AND LIABILITY
The producer grants 2 years warranty to a new device.
As the manufacturer has no inuence on installation, warranty
only applies to the product itself.
If any fault or damage is detected on your product, please
contact your dealer and provide your sales slip or invoice as
evidence of the purchase, if necessary. Your dealer will repair the
fault either on site, or send the device to the manufacturer. You
make the work of our technicians considerably easier, describing
possible faults in detail – only then you can be assured that
faults, occurring only rarely, will be found and repaired with
certainty!
The manufacturer is not liable for damages to persons or prop-
erty caused by improper installation, operation or maintenance,
not described in this manual.
Do not alter or modify the product or its accessories.
Any use other than described in this user`s manual is not
permitted and causes loss of warranty, loss of guarantee, and
non-liability.
Produkt Specifikationer
| Mærke: | Sonero |
| Kategori: | Kabler til pc'er og periferiudstyr |
| Model: | X-AOC210-300 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sonero X-AOC210-300 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kabler til pc'er og periferiudstyr Sonero Manualer
14 August 2024
12 August 2024
11 August 2024
11 August 2024
Kabler til pc'er og periferiudstyr Manualer
- Terratec
- Targus
- Rocstor
- Akasa
- Yamaha
- TP-Link
- Gefen
- Legrand
- I-Tec
- Savio
- Arris
- ISimple
- Blaupunkt
- Infinity
- Vantage Point
Nyeste Kabler til pc'er og periferiudstyr Manualer
3 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
1 April 2025
19 Marts 2025