Sonic Alert SB200ss-v3 Manual

Sonic Alert Overvågningskamera SB200ss-v3

Læs gratis den danske manual til Sonic Alert SB200ss-v3 (5 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 68 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 34.5 anmeldelser. Har du et spørgsmål om Sonic Alert SB200ss-v3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013

Sonic Boom Travel & Bed side Alarm Clock with Bed Shaker

Model SB200ss- v3

IMPORTANT – Please read these instructions carefully before use and retain for future reference. See operating instructions

on back.

-- Use only the supplied or recommended Sonic Alert adaptor to connect the unit.

Warning: To prevent ﬁre or shock hazard do not expose this appliance to rain or moisture. Before connecting to mains make sure that

the requirements speciﬁed on the apparatus corresponds to the available power supply i.e. AC 240V~. 100 –

-- The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table cloths, curtains, etc;

-- No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

-- It shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

-- Do not place the product in closed bookcases or racks without proper ventilation.

OPERATION INSTRUCTIONS

IMPORTANT- please read these instructions carefully before use and retain for future reference.

FEATURES

1. Alarm 1 indicator (AL1)

9. Snooze Button/ Snooze

Duration Adjustment/

Dimmer Control

2. Alarm Mode Switch

10. Tone Control

3. PM indicator

11. Alarm Selector

4. Alarm Oﬀ Button

12. Alarm 2 indicator (AL2)

5. Alarm Set Button / Alarm

Duration Adjustment

13. Volume Control

6. Fast Button/ 12 /24

hour Selector

14. DC 9V input

7. Slow Button

15 . Vibrator input

8. Time Set Button

16. Battery Compartment

English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013

Alarm –

Enable Alarms:

1) To enable Alarm 1, slide the “ALARM SELECTOR ”(11) to AL1 position. the alarm indicator

“ “AL1 (1) will light up.

2) To enable Alarm 2, slide the “ALARM SELECTOR “(11) to AL2 position, the alarm indicator

“ ”AL2 2(1 ) will light up.

3) To enable both alarms, slide the “ALARM SELECTOR “(11) to AL1+AL2 position, the alarm

indicators “AL1 (1) and AL2 (12) “ “ “ will light up.

To Select Wake up mode

To select the wake up mode, slide the “Alarm Mode Switch (2“) to your desired position:-

a) BUZZ for sound b) VIB for bed shaker c) VIB/ BUZZ“ “ “ “ “ “ for both sound and bed

shaker

NOTE: once the wake up mode is chosen, this will apply to both alarms.

Alarm Patterns –

When the alarm is activated, alarm pattern of the buzzer / flashi display will be out of sync ng

with the vibrator. This means th when the buzzer / ﬂashing display is ON, the vibrator will be OFF at

and while the buzzer/ ﬂashing display is OFF, the vibrator will be ON.

ALARM 1 - When Alarm 1 is activate, it will have 3 beeps for buzzer, then the vibrator. This

pattern is repeated until the alarm is stopped.

ALARM 2 - When Alarm 2 is activate, it will have 4 beeps for buzzer, then the vibrator. This

pattern is repeated until the alarm is stopped.

Adjusting The Alarm Duration Time

The default alarm duration time setting is minutes; you may adjust the alarm duration between 1 30

minute and 59 minutes as desired. To adjust the alarm duration:

• Press and hold the AL. SET button (5) for six seconds. The clock display sh the default will ow

alarm duration as . Release the ‘30’AL SET button (5).

• Press the “ ” button SLOW (7) to adjust the alarm duration to the desired setting, from 1 minute to

59 minutes.

• When the display is showing the desired alarm duration time, it will return to the normal clock

mode after 3 seconds. The new alarm duration time setting becomes the new default and remains

in the memory until you change it again.

Snooze Operation –

1. When the alarm turns on in the morning you may press the SNOOZE Button (9) to stop the

alarm temporarily. The alarm will shut off for 9 minutes or for the predetermined time you

select from 1-30 minutes, and then turn on again. The snooze operation may be repeated

indeﬁnitely until the alarm is turned off.

2. The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other.

Produkt Specifikationer

Mærke:	Sonic Alert
Kategori:	Overvågningskamera
Model:	SB200ss-v3

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonic Alert SB200ss-v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Sonic Alert Manualer

Sonic Alert SB200ss-v3 Manual

3 September 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

TP-Link VIGI S385PI Manual

12 August 2025

TP-Link Tapo TC42 Manual

12 August 2025

Geovision GV-GFER12800 Manual

12 August 2025

Geovision GV-TMS20811 Manual

12 August 2025

Lorex U222AAW Manual

12 August 2025

D-Link DCS-F4708E Manual

12 August 2025

D-Link DCS-F4705E Manual

12 August 2025

D-Link DCS-F4718E Manual

12 August 2025

Tenda CP3 Pro Manual

12 August 2025

Reolink Argus PT Lite Manual

12 August 2025