SONORIS Meter VST 2.0 Manual

SONORIS Audio Software Meter VST 2.0

Læs gratis den danske manual til SONORIS Meter VST 2.0 (11 sider) i kategorien Audio Software. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 11 anmeldelser. Har du et spørgsmål om SONORIS Meter VST 2.0, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
Sonoris Meter VST 2.0
User Manual
Introduction
© 2008 Pieter Stenekes
info@sonoris.nl
Copyright © Sonoris Audio Engineering 2008 – www.sonoris.nl 1/11
Thank you for choosing Sonoris Meter!
What is it?
With this plugin, you can accurately measure peak and loudness levels of audio signals, at one scale.
Besides a regular meter scale the Sonoris Meter supports the K-System, from Bob Katz, mastering engineer
and founder of Digido mastering studio. During the development period of this plugin Bob Katz was very
helpful in providing information. The end product closely follows the K-system specifications, including
Leq(A) loudness metering and bandlimited pink noise monitor calibration.
The Sonoris Meter features an oversampling mode. In this mode the meter catches intersample peaks that
can cause ear fatiguing sound when audio is played on consumer CD players. Many CD players have
inferior D/A converters with little headroom that will distort with samples above the clip level. These peaks
occur when the audio is clipped (read squashed / limited) or otherwise digitally manipulated (eg. VSTi's). In
oversampling mode the Sonoris Meter models the D/A conversion process and allows for maximizing the
level but avoiding this distortion.
At the bottom of the interface a correlation meter can be found. This meter enables the user to monitor the
phase relationship between the left and right channels.
About the plugin
All calculations are performed with 64 bit integer math except for the filters.
Basic Operation
Click on a button to active or deactivate the corresponding function. Controls can be changed with the mouse
by dragging up or down or by clicking on the small arrows. An added feature is the possibility to adjust the
controls with the mousewheel.
Clicking on the meter values above the meter bars resets them. If a clipping incident occurred, the clipping
indicator can be reset by clicking on it.
About this helpfile
This helpfile explains all settings and options, as well as basic K-System theory. For more in-depth
information please visit .www.digido.com
Have fun!
Copyright © Sonoris Audio Engineering 2008 – www.sonoris.nl 2/11

Produkt Specifikationer

Mærke: SONORIS
Kategori: Audio Software
Model: Meter VST 2.0

Har du brug for hjælp?

Hvis du har brug for hjælp til SONORIS Meter VST 2.0 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Audio Software SONORIS Manualer

SONORIS

SONORIS Mastering Compressor 1.2 Manual

31 August 2024
SONORIS

SONORIS Mastering Equalizer 1.2 Manual

31 August 2024
SONORIS

SONORIS Meter VST 2.0 Manual

31 August 2024
SONORIS

SONORIS Parallel Equalizer 1.2 Manual

31 August 2024
SONORIS

SONORIS DDP Creator 5 Manual

31 August 2024
SONORIS

SONORIS Dither 1.0 Manual

31 August 2024
SONORIS

SONORIS Multiband Compressor 1.2 Manual

31 August 2024

Audio Software Manualer

Nyeste Audio Software Manualer

Eventide

Eventide Sheen Machine Manual

11 Marts 2025
Eventide

Eventide DeBoom Manual

11 Marts 2025
Steinberg

Steinberg VST Live Manual

20 Februar 2025
Steinberg

Steinberg VST Connect Pro 5 Manual

20 Februar 2025
Metric Halo

Metric Halo SuperGate Manual

20 Februar 2025
Metric Halo

Metric Halo Precision De-Esser Manual

20 Februar 2025
Metric Halo

Metric Halo Sonic EQ Manual

20 Februar 2025
Metric Halo

Metric Halo Dirty Delay Manual

20 Februar 2025
MAAT

MAAT SantaCruzEQ Manual

20 Februar 2025
MAAT

MAAT thEQorange Manual

20 Februar 2025