Sony LMD-2050W Manual

Sony overvåge LMD-2050W

Læs gratis den danske manual til Sony LMD-2050W (38 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Sony LMD-2050W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/38

3-100-042-13 (1)

LCD Monitor

LMD-2050W

LMD-2450W

Operating Instructions

Owner’s Record

The model and serial numbers are located at the rear.

Record these numbers in the spaces provided below.

Refer to these numbers whenever you call upon your

Sony dealer regarding this product.

Model No. ____________________

Serial No. ____________________

WARNING

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

WARNING

THIS APPARATUS MUST BE EARTHED.

For the customers in Europe

This product with the CE marking complies with both

the EMC Directive and the Low Voltage Directive issued

by the Commission of the European Community.

Compliance with these directives implies conformity to

the following European standards:

• EN60950-1: Product Safety

• EN55103-1: Electromagnetic Interference(Emission)

• EN55103-2: Electromagnetic

Susceptibility(Immunity)

This product is intended for use in the following

Electromagnetic Environments:

E1 (residential), E2 (commercial and light industrial),

E3 (urban outdoors), E4 (controlled EMCenvironment,

ex. TV studio)

For the customers in Europe

The manufacturer of this product is Sony Corporation,

1-7-1 Konan, Minato-ku, Tokyo, Japan.

The Authorized Representative for EMC and product

safety is Sony Deutschland GmbH, Hedelfinger Strasse

61, 70327 Stuttgart, Germany.

For any service or guarantee matters please refer to the

addresses given in separate service or guarantee

documents.

For the customers in the U.S.A.

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital

device pursuant to Subpart B of Part 15 of FCC Rules.

WARNING:

Using this unit at a voltage other than 120 V may require

the use of a different line cord or attachment plug, or

both. To reduce the risk of fire or electric shock, refer

servicing to qualified service personnel.

Attention-when the product is installed in Rack

(LMD-2050W) :

1.Prevention against overloading of branch

circuit

When this product is installed in a rack and is supplied

power from an outlet on the rack, please make sure that

the rack does not overload the supply circuit.

2.Providing protective earth

When this product is installed in a rack and is supplied

power from an outlet on the rack, please confirm that the

outlet is provided with a suitable protective earth

connection.

3.Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the rack

is within the specified limit of this product.

4.Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous condition

due to uneven mechanical loading.

5.Install the equipment while taking the

operating temperature of the equipment into

consideration

For the operating temperature of the equipment, refer to

the specifications of the Operation Manual.

6.When performing the installation, keep the

following space away from walls in order to

obtain proper exhaust and radiation of heat.

Lower, Upper : 4.4 cm (1 3/4 inches) or more

Produkt Specifikationer

Mærke:	Sony
Kategori:	overvåge
Model:	LMD-2050W

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony LMD-2050W stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge Sony Manualer

Sony ZRA-BH15D Manual

11 Januar 2025

Sony ZRK-CH15D Manual

3 September 2024

Sony LMD-1420 Manual

2 September 2024

Sony FW-75BZ35F Manual

2 September 2024

Sony PVM-2541A Manual

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

overvåge Manualer

Nyeste overvåge Manualer

BenQ DesignVue PD2730S Manual

8 April 2025

Asus VA279QGS Manual

8 April 2025

Acer EV227Q Manual

8 April 2025

BenQ PD3226G Manual

7 April 2025

Philips 221V8LB Manual

4 April 2025

Extron TLS 1025M Manual

2 April 2025

PureTools PT-SCREEN-100 Manual

1 April 2025

Viewsonic VG2752-2K Manual

30 Marts 2025

Satco S13165 Manual

30 Marts 2025

Satco S16434 Manual

30 Marts 2025