Sony VGP-PRUX1 Manual

Sony Computertilbehør VGP-PRUX1

Læs gratis den danske manual til Sony VGP-PRUX1 (2 sider) i kategorien Computertilbehør. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Sony VGP-PRUX1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operating Instructions

WARNING

To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

• Use your product only with the AC adapter supplied with your personal

computer.

• To disconnect it completely from the main voltage, unplug the AC adapter.

• Make sure that the socket outlet is easily accessible.

For customers in the USA

Owner’s Record

The model number and serial number are located on the bottom of your

port replicator. Record the serial number in the space provided here. Refer

to the model and serial number when you call your Sony Service Center.

Model No. VGP-PRUX1

Serial No. ——————————

WARNING

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference using one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

Only peripherals (computer input/output devices, terminals, printers, etc.)

that comply with FCC Class B limits, may be attached to this computer

product. Operation with non-compliant peripherals is likely to result in

interference to radio and television reception.

All cables used to connect peripherals must be shielded and grounded.

Operation with cables, connected to peripherals, that are not shielded and

grounded, may result in interference to radio and television reception.

If you have any questions about this product, you can reach the Sony

Customer Infomation Service Center at 1-888-476-6972 in the United States

or 1-800-961-7669 in Canada; or write to the Sony Customer Information

Service Center at 12451 Gateway Blvd, Ft. Meyers, FL 33913, or find Sony

Customer Service on the Web at

http://www.sony.com/pcsupport.

Declaration of Conformity

Trade Name: SONY

Model No.: VGP-PRUX1

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone No.: 858-942-2230

(This phone number is for FCC-related matters only.)

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

• VAIO and are trademarks of Sony Corporation.

• i.LINK is a designation referring to IEEE 1394-1995 and IEEE 1394a-2000.

i.LINK and the i.LINK logo “ ” are trademarks of Sony Corporation.

Before use

Before using the port replicator, please read this manual thoroughly and

retain it for future reference. See also the manuals provided with your

personal computer for more information about connecting the port

replicator.

The Sony VGP-PRUX1 port replicator is designed for Sony personal

computers. However, it may not be used with some models.

2-694-689- (1)12

Port Replicator

VGP-PRUX1

Printed on 70% or more recycled paper using VOC

(Volatile Organic Compound)-free vegetable oil based ink.

S400

Continue to next page

Specifications

Connectors Port replicator connector: Custom connector (1)

USB: Type-A connector (3)*

i.LINK (IEEE 1394): S400 4-pin (1)

External display output:

MONITOR ( ): Analog RGB, VGA, D-sub 15-pin (1)a

AV OUT (T): compatible with NTSC/PAL,

stereo mini jack (1)

LAN connector: LAN (100BASE-TX/10BASE-T) (1)*

* The specifications are the same as those of the personal

computer you are using. For details, refer to the manuals

provided with your personal computer.

Power requirements

AC adapter**

** Use the unit with an AC adapter (VGP-AC16V7) that is

compatible with your personal computer.

Operating temperature

41°F to 95°F (5°C to 35°C)

(temperature gradient less than 18°F (10°C)/hour)

Operating humidity

20% to 80% (not condensed), provided that humidity is

less than 65% at 95°F (35°C)

(hygrometer reading of less than 84°F (29°C))

Storage temperature

–4°F to 140°F (–20°C to 60°C)

(temperature gradient less than 18°F (10°C)/hour)

Storage humidity

10% to 90% (not condensed), provided that humidity is

less than 20% at 140°F (60°C)

(hygrometer reading of less than 95°F (35°C))

Dimensions Approx. 6.0 (w) 4.6 (d) inches× 2.9 (h) ×

(Approx. 150.2 × 71.9 × 114.7 mm)

Mass Approx. 8.8 oz. (249 g)

Supplied accessories

Operating instructions (1)

Holder (1)***

***When using the unit, attach the holder. For details on how to

attach it, refer to the manuals provided with your personal

computer.

Design and specifications are subject to change without notice.

Notes on use

• Use the unit with an AC adapter that is compatible with your personal

computer. See also the manuals provided with your Sony personal

computer for more information.

• To disconnect the unit completely from the main voltage, unplug the AC

adapter.

• Make sure that the socket outlet is easily accessible.

• Do not place the unit in locations that are:

– Extremely hot or cold

– Dusty or dirty

– Very humid

– Vibrating

– Subject to strong magnetic fields

– Sandy

– Subject to direct sunlight

• Do not apply mechanical shock or drop the unit.

• Make sure that nothing metallic comes into contact with the metal parts

of the unit. If this happens, a short-circuit may occur and the unit may be

damaged.

• Do not operate the unit with a damaged cord.

• Do not operate the unit if the unit itself has been dropped or damaged.

• Always keep the metal contacts clean.

• Do not disassemble or convert the unit.

• While in use, it is normal for the unit to get warm.

• Keep the unit away from TV or AM receivers, because it can disturb TV

or AM reception.

• i.LINK, USB, PC card slot, Printer, DVI-D and MONITOR connectors are

not supplied with Limited Power Sources if those connectors are

provided.

• When connecting or disconnecting the unit, handle it carefully.

• When transporting the unit, prevent foreign objects from causing a

malfunction by using the battery pack, the connector covers and the

supplied slot protectors if there is any.

• When transporting your personal computer, be sure to remove the unit

first. Moving your personal computer with the unit installed could cause

the unit to fall off, resulting in personal injury, or damage to the unit or

your personal computer.

• When transporting the unit, detach the holder.

• If there are any dust or dirt particles on the port replicator connector,

your personal computer may not be able to detect the port replicator

when it is connected (even if the particles are invisible to the eye).

If the connection seems to be poor, remove the AC power adapter and

battery and wipe off the connector and the area around it on both the

personal computer and port replicator. Commercial air dusters are also

effective for blowing away residual dust and dirt.

Be careful not to damage the connectors while cleaning them.

On cleaning

Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a

mild detergent solution. Do not use any type of solvent, such as alcohol or

benzine, which may damage the finish.

Produkt Specifikationer

Mærke:	Sony
Kategori:	Computertilbehør
Model:	VGP-PRUX1

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony VGP-PRUX1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Computertilbehør Sony Manualer

Sony PCGA-BP4R Manual

12 Maj 2024

Sony PCWA-C800S Manual

10 Maj 2024

Sony PRSA-CC1 Manual

8 Maj 2024

Sony HMD-A400 Manual

6 Maj 2024

Sony PCGA-AC16V2 Manual

30 April 2024

Sony GDM-F520 Manual

25 April 2024

Sony PCGA-MM512U Manual

6 April 2024

Sony VGP-PRSZ1 Manual

5 April 2024

Sony PCGA-ACX1 Manual

1 April 2024

Sony VGP-BMS77 Manual

9 Marts 2024

Computertilbehør Manualer

Nyeste Computertilbehør Manualer

UNITEK Y-3322 Manual

12 August 2025

Schneider AP5717CH Manual

11 August 2025

ProXtend USB-C Triple 4K Manual

7 August 2025

Gembird NBS-D1-01 Manual

1 August 2025

Gembird NBS-D1-02 Manual

1 August 2025

Tripp Lite NFI-U08-2 Manual

31 Juli 2025

Tripp Lite N286-400G-SR8-G Manual

30 Juli 2025

Alogic MX2 Manual

30 Juli 2025

Alogic Elite Power EPLSWC Manual

30 Juli 2025

One For All DM0040 Manual

29 Juli 2025