Pryme BT-PTT-ZU-FOB Manual

Pryme Walkie talkie BT-PTT-ZU-FOB

Læs gratis den danske manual til Pryme BT-PTT-ZU-FOB (2 sider) i kategorien Walkie talkie. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Pryme BT-PTT-ZU-FOB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

To get the Zello app on your phone, install Zello from your Zello@Work networks,

or download the app from the Google Play store or Apple App Store.

Setting Up Zello (Android)

NOTE: The PTT-ZU uses a special version of BT called BT Low Energy (BLE).

This product can only be used with Android handsets that have hardware support for BLE

and are using Android version 5.0 (Lollipop) or newer.

1. Make sure that your phone's BT radio is enabled.

2. Open Zello and tap on the more options symbol " " in

the top right hand corner of the app.

3. Go to Options > Push-to-talk buttons.

4. Tap on the "+ADD BUTTON" option.

5. The app will now attempt to detect the PTT button press.

Press and release the PTT button of the PTT-Z one or more

times until detected by the phone.

6. PTT-Z will now be shown on the list of available

BT PTT buttons.

7. Open the Talk screen in Zello (the screen with a big round

button). Pressing the PTT button the PTT-Z device should

now cause Zello to transmit.

Setting Up Zello (iOS)

1. Make sure that your phone's BT is enabled.

2. Open Zello and go to: Settings > PTT Button > Wireless Zello Button.

3. Make sure that the “Wireless Button Service” is turned on by sliding the button to the right.

4. Press and hold the PTT button on the BT-PTT-Z.

5. Select “PTT-Z” from the list of PTT devices shown on the screen.

6. Open the Talk screen in Zello (the screen with a big round button).

Pressing the PTT button the Push-to-Talk device should now cause Zello to transmit.

The BT-PTT-ZU uses one replaceable CR2032 coin cell type battery. A single battery can provide up

to two full years or more of operating time. However, operating time can vary depending on the

usage cycle and the age and condition of the battery. At the end of the battery's lifetime, it is

necessary to replace the battery with a new one.

To change the battery:

1. Remove the 4 small Phillips head screws on the rear of the BT-PTT-ZU using a jeweler's/eyeglass

screwdriver. Separate the two halves of the BT-PTT-ZU housing.

2. Locate the battery holder inside of the device. Remove the old battery from the battery holder

if one is installed. A ball point pen can be used to push the battery out of the holder if needed.

3. Insert a new CR2032 3-volt coin cell battery into the battery holder, observing proper polarity.

The positive side of the battery (marked with a “+” sign) should face away from the circuit board.

4. Reseat the two halves of the housing and reinstall the 4 screws to secure it in place.

NOTE: If you are unable to perform the battery replacement yourself, battery replacement

service is available from PRYME for a ﬂat fee. Contact PRYME Support for further details.

It is also possible to change the rear housing of the BT-PTT-ZU to switch from one mounting type to

another. Replacement backs are available by contacting PRYME's sales and support departments.

PRYMEBLU® BT-PTT-ZU

Push-to-Talk User’s Guide

ZU version for use with Zello and Wave Communicator

(on both Apple iOS and Android smartphones) push-to-talk apps.

PRYME® and PRYME BLU® are trademarks owned by PRYME Radio Products, Brea CA.

All other product or service names are the property of their respective owners.

Model No. BT-PTT

Made in Taiwan

Controls and Connection

Replacing the Battery App Setup (Zello)

PTT Button

Press this button to activate

the Push-to-Talk function of

the PTT Over Cellular

(POC) app.

Lanyard Eyelet

You can use this eyelet to attach

a lanyard, wrist strap, chain,

or key chain split-ring to the

BT-PTT-ZU (not included).

The BT-PTT-ZU is available in three diﬀerent

versions with diﬀerent mounting conﬁgurations.

BT-PTT-FOB: This version has a ﬂat back and

can be mounted to any ﬂat surface using adhesive

Velcro or double-sided tape. The eyelet can also

be used to attach the PTT to a lanyard, chain,

or key ring (not included).

BT-PTT-STRAP: Has a ring of Velcro attached

to the rear of the PTT and can be mounted to a

steering wheel, gear shift, or other knob/handle.

BT-PTT-RING: Uses a rubber ring which can

be worn on the user's ﬁnger.

Power Switch

This slide switch is used to turn the BT-PTT-ZU on and oﬀ.

When the switch is in the *I* position, the device is powered on.

Set to the switch to the *O* position to save battery life when

the switch is not being used.

NOTE: The BT-PTT-ZU has a sleep

mode which is used to preserve

battery life. This sleep mode will

engage When the power switch is

turned to the "ON" position and four

minutes elapse where the BT-PTT-ZU is not

connected to a phone or tablet via BT.

While sleeping, the power consumption of the BT-PTT-ZU is greatly reduced.

To wake the device from a sleep state, simply press the PTT button.

NOTE:

BT-PTT-FOB model shown.

Appearance and mounting

mechanism may be diﬀerent.

See Page 2 for details.

3 4

Battery Holder

Located inside the housing

of the Push-to-Talk, the battery

slot holds one coin cell battery

which power the device.

BT-PTT-FOB

SCREWS

BT-PTT-RINGBT-PTT-STRAP

Produkt Specifikationer

Mærke:	Pryme
Kategori:	Walkie talkie
Model:	BT-PTT-ZU-FOB

Har du brug for hjælp?

Hvis du har brug for hjælp til Pryme BT-PTT-ZU-FOB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Walkie talkie Pryme Manualer

Pryme BT-PTT-ZU-FOB Manual

13 August 2025

Pryme BT-PTT-Z-SMART Manual

13 August 2025

Pryme LNK-23-ZU Manual

12 August 2025

Pryme BTH-300-MAX Manual

3 Juni 2025

Walkie talkie Manualer

Nyeste Walkie talkie Manualer

GoGen BOB A BOBEK Manual

30 November 2025

GoGen DECKO Manual

28 November 2025

PTTalky FR1 Manual

27 November 2025

VOOPON C56TB Manual

25 November 2025

Motorola Talkabout T270TP Manual

10 November 2025

Uniden SX407-2CKFHS Manual

10 November 2025

Retevis NR30 Manual

10 November 2025

Cobra MR HH600 FLT GPS BT Manual

8 November 2025

Motorola WAVE TLK 150 Manual

8 November 2025

Cobra MR F57B Manual

7 November 2025