Sophos AP100X Manual

Sophos Adgangspunkt AP100X

Læs gratis den danske manual til Sophos AP100X (26 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Sophos AP100X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/26

Operating Instructions

Sophos Access Points

Operating Instructions

1Wireless Access Points

Foreword

We are pleased to welcome you as a new Sophos Access Point customer.

These operating instructions will help you install and conﬁgure the access point

and provide technical speciﬁcations of all Sophos access point models. In addition,

please also see the following documents that contain useful information on safety,

regulatory compliance, and conﬁguration options:

Ì Sophos Access Points Safety Instructions and Regulatory Information

Ì Sophos UTM Administration Guide: Conﬁguring the

UTM hardware and software appliance

The instructions must be read carefully prior to using the device and should be kept

in a safe place. You may download all user manuals and additional documentation

from the Sophos Knowledgebase at http://www.sophos.com/en-us/support/

knowledgebase.aspx.

Introduction

UTM Wireless Protection simpliﬁes the operation of secure and reliable wireless

networks. It combines affordable and conﬁguration-less access points through a built-

in wireless controller in the in Sophos UTM. The wireless controller itself centrally

manages all wireless access points; all you need to do is plug in the device anywhere

in your network. The access point will ﬁnd the controller, fetch its conﬁguration and

become operable within seconds. In addition, it easily provides wireless guest Internet

access during the initial setup, unless you explicitly deny automatic conﬁguration.

Installation

Preliminary steps

Please update your UTM appliance to the latest version available. Note that you also

need a valid UTM Wireless Protection subscription to operate the Sophos Access

Points.

Connect the access point to the internal network

Decide where you would prefer to place the access point, and put the access point in

that location. For mounting instructions, see below. Now connect the access point to

your internal network by plugging in the network cable to the access point’s RJ45 or

LAN (PoE) Ethernet interface, respectively.

Produkt Specifikationer

Mærke:	Sophos
Kategori:	Adgangspunkt
Model:	AP100X
Kode for international beskyttelse (IP):	IP67
Bredde:	255 mm
Dybde:	90 mm
Højde:	255 mm
Vægt:	2500 g
Produktfarve:	Hvid
Opbevaringstemperatur (T-T):	-30 - 60 °C
Relativ luftfugtighed ved drift (H-H):	0 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	0 - 95 %
Ethernet LAN-porte (RJ-45):	1
Strømforbrug (typisk):	17 W
Driftstemperatur (T-T):	-20 - 60 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	802.1x RADIUS, WEP, WPA, WPA2
Husmateriale:	Metal
Certificering:	CE, FCC, IC, CB, cULus
Placering:	Pole, Wall
Netværksstandarder:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at
Antenner, antal:	6
LED-indikatorer:	Ja
Maksimal dataoverførselshastighed:	1300 Mbit/s
Antenne type:	Ekstern
Firmware kan opgraderes:	Ja
Strøm over Ethernet (PoE):	Ja
Antal kanaler:	13 kanaler
MIMO:	Ja
2.4 GHz:	Ja
5 GHz:	Ja
Antennefunktioner:	Dipolantenne
Antal SSID understøttet:	16
Niveau for antennestyrke (maks.):	6 dBi
Maksimal dataoverførselshastighed (2,4 GHz):	450 Mbit/s
Antennestik type:	N-type