Soundcore Liberty 2 Pro Manual

Soundcore Øreprop Liberty 2 Pro

Læs gratis den danske manual til Soundcore Liberty 2 Pro (79 sider) i kategorien Øreprop. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Soundcore Liberty 2 Pro, eller vil du spørge andre brugere om produktet?

Side 1/79
English 01
Čeština 07
Dansk 13
Deutsch 19
ελληνικά 25
Español 31
Suomi 37
Français 43
Magyar 49
Italiano 55
Nederlands 61
Norsk 67
Język polski 73
Português 79
Pусский 85
Slovenský Jazyk 91
Slovenski Jezik 97
Svenska 103
Türkçe 109
日本語 115
฀฀฀ 121
简体中文 127
繁體中文 133
Portugues do Brasil 139
ﺔﻳ
ِب
َرَﻊﻟ 145
תי ִרב 151
01 EN EN 02
Charging
Slide to open or close the charging case to activate the LED battery indicator.
Fully charge both the earbuds and the charging case before the ฀rst-time using.
To preserve battery lifespan, fully charge at least once every 45 days.
To prevent damage, use the provided USB-C cable.
You can charge the charging case by using a certi฀ed wireless charger (not provided).
Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
Powering On/Off
Slide to open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will
automatically power off.
2
1
OFF
ON
LED behavior (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
To manually power on, press and hold the multi-function button on either one of earbuds
for 1 second.
To manually power off, press and hold the multi-function button on either one of earbuds
for 5 seconds.
Pairing
True Wireless Stereo Connection
Slide to open the charging case, the earbuds will automatically power on. The right earbud will
automatically connect with the left earbud.
LED behavior (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
2
13
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro Bluetooth Pairing Request
“Headset would like
to pair with your Phone
Cancel Pair
Pair
LED behavior (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen popped up. Don’t worry and it will not in฀uence the using.
Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.


Produkt Specifikationer

Mærke: Soundcore
Kategori: Øreprop
Model: Liberty 2 Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Soundcore Liberty 2 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig