SoundPEATS T3 Manual


Læs gratis den danske manual til SoundPEATS T3 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om SoundPEATS T3, eller vil du spørge andre brugere om produktet?

Side 1/7
1
English
First Time of Using
1. Open the cover of the charging case, take out the two earphones, remove
the insulation lm on them separately, and then put both earphones back
into the charging case. By this time, the le and right earphones will
automatically enter the TWS mutual pairing state. Aer successful mutual
pairing, the blue light in the right earphone will ash slowly and the blue light
in the le earphone will always be on, and the two earphones will enter the
2. Then go to Bluetooth settings of your device, and choose SOUNDPEATS T3.
SOUNDPEATS T3
Connected
2
Reset
Wearing methods
English
1.Clear the pairing data from your device.
2. Take out the two earphones from the charging
case, press and hold the multifunctional buttons
for 10s until the blue indicator lights in both
earphones ash for three times and then go out.
At this time, the earphones are o, and then
press and hold the multifunctional buttons of
both earphones again for 10S until the blue
indicator lights ash twice, and the reset is
completed.
3. Place the earbuds back into the charging case
and close the case lid, waiting for seconds, and
then open it again. The earphones are
activated successfully.
1. Identify the le earphone and the right earphone.
2. Adjust the earphones to t your ears.


Produkt Specifikationer

Mærke: SoundPEATS
Kategori: Ikke kategoriseret
Model: T3

Har du brug for hjælp?

Hvis du har brug for hjælp til SoundPEATS T3 stil et spørgsmål nedenfor, og andre brugere vil svare dig