Soundsphere SS-ATB Manual

Soundsphere Ikke kategoriseret SS-ATB

Læs gratis den danske manual til Soundsphere SS-ATB (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Soundsphere SS-ATB, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
SS-ATB - Adjustable Tilt Bracket
OWNER’S MANUAL
© 2021 MSE Audio. Rev. 02.25.2021
360º of the Best Sound Around™
Contact: MSE Audio, 855.663.5600 / 913.663.5600 / sales@mseaudio.com
1. Assemble the ATB to the loudspeaker’s leg, with the ‘U’ bolts
supplied, as shown. Note that the stop bracket pad faces the
reector.
2. Tighten the nylon locknuts on the ‘U’ bolts until snug.almost
3. Slide the ATB along the leg toward the reector of the
loudspeaker until the Stop Bracket Pad the rim rmly contacts
of the reector.
4. Secure the locknuts taking care to keep the Stop Bracket Pad
at against the reector rim.
ATB Nomenclature & Assembly
BOOM BRACKET
LEG CHANNEL
PIVOT BRACKET
ANGLE ADJUSTING
HOLES & LOCKING
BOLT
STOP BRACKET
STOP BRACKET PAD
LEG OF LOUDSPEAKER
‘U’ BOLTS
Assembly Details
Mounting the ATB to the BK-2 & BK-4
EYE BOLT
HEX BOLT
FLAT WASHER
FLAT WASHER
LOCKNUT
1. Assemble the ATB to the loudspeaker’s leg, with the ‘U’ bolts
supplied, as shown.
2. Tighten the nylon locknuts on the ‘U’ bolts until snug.almost
3. Slide the ATB along the leg toward the reector of the
loudspeaker until the Stop Bracket Pad the rim rmly contacts
of the reector.
4. Secure the locknuts taking care to keep the Stop Bracket Pad
at against the reector rim.
SS-ATB - Adjustable Tilt Bracket
OWNER’S MANUAL
© 2021 MSE Audio. Rev. 02.25.2021
360º of the Best Sound Around™
Contact: MSE Audio, 855.663.5600 / 913.663.5600 / sales@mseaudio.com
HEX BOLTHEX BOLT
FLAT WASHER
LOCKNUT
EYE BOLT
FLAT WASHER
Assembly Details
Mounting the ATB to the BK-3 & BK-5
1. Assemble the ATB to the loudspeaker’s leg, with the ‘U’ bolts
supplied, as shown.
2. Tighten the nylon locknuts on the ‘U’ bolts until snug.almost
3. Slide the ATB along the leg toward the reector of the
loudspeaker until the Stop Bracket Pad the rim rmly contacts
of the reector.
4. Secure the locknuts taking care to keep the Stop Bracket Pad
at against the reector rim.
WARNING
Be sure to securely tighten all hardware before hanging the loudspeaker. Wire rope (steel cable), cable clamps with
saddles and thimbles of suitable size and strength are the recommended materials for overhead suspensions. All
loudspeakers should be redudantly safety wired to structural members of the building with an approved safety wire
system or other agency certied materials.
IMPORTANT: Always check local safety codes before installing any overhead loudspeaker system and for periodic
inspection and maintenance of the installation.

Produkt Specifikationer

Mærke: Soundsphere
Kategori: Ikke kategoriseret
Model: SS-ATB

Har du brug for hjælp?

Hvis du har brug for hjælp til Soundsphere SS-ATB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Soundsphere Manualer

Soundsphere

Soundsphere SS-MBM Manual

4 Februar 2025
Soundsphere

Soundsphere SS-ATB Manual

4 Februar 2025
Soundsphere

Soundsphere SS-MBL Manual

4 Februar 2025
Soundsphere

Soundsphere SS-BCL Manual

4 Februar 2025
Soundsphere

Soundsphere SS-BCM Manual

4 Februar 2025
Soundsphere

Soundsphere SS-110B Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Zoom

Zoom A3 Manual

16 Juli 2025
DS18

DS18 SLG-FKP6 Manual

16 Juli 2025
CYP

CYP PU-1201-KIT Manual

16 Juli 2025
JUNG

JUNG 4008 TSM Manual

16 Juli 2025
Emko

Emko SMR1P1-00-00-01-00 Manual

16 Juli 2025
DS18

DS18 Hydro NXL-X6TP Manual

16 Juli 2025
CYP

CYP PUV-1350PL-TXWP Manual

16 Juli 2025
Audio Pro

Audio Pro VOL-1 Manual

16 Juli 2025
CYP

CYP PUV-2010TXWP Manual

16 Juli 2025
Hillvert

Hillvert HT-VC-400 Manual

16 Juli 2025