SoundTube RF52-EZ Manual


Læs gratis den danske manual til SoundTube RF52-EZ (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om SoundTube RF52-EZ, eller vil du spørge andre brugere om produktet?

Side 1/1
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Wire Color
Black
Brown
Yellow
Blue
70V-Common
10W
5W
2.5W
1.3W
100V-Common
NC
10W
5W
2.5W
RF52
Tap Wire
Key
1. 2.
2. Connect speaker wires
to signal wires using
included wire nuts.
Select the desired wire for
the intended tap setting as
indicated on the chart
below.
4. Tighten each clamping
wing screws until they are
snug and the speaker ts
rmly against the ceiling.
DO NOT OVERTIGHTEN.
3. Place the speaker in the
opening. If installing in an
existing backcan, make sure
the clamping wings are
positioned such that their
operation will not be
obstructed by any material or
objects inside the back can.
Box contents
1 Speaker
1 Grille
2 Wire nuts
© 2017 SoundTube Entertainment, Inc. All rights reserved. PN INS-RF52-EZ Rev 06.25.19
1. Unpack speaker.
6. Done.5. Place the grill over the
center of the speaker. The
magnets will hold it in place.
Install Instructions For:
RF52-EZ speaker
RF52-EZ-WH


Produkt Specifikationer

Mærke: SoundTube
Kategori: Ikke kategoriseret
Model: RF52-EZ

Har du brug for hjælp?

Hvis du har brug for hjælp til SoundTube RF52-EZ stil et spørgsmål nedenfor, og andre brugere vil svare dig