Speco Technologies AP200M Manual

Speco Technologies Wifi repeater AP200M

Læs gratis den danske manual til Speco Technologies AP200M (4 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Speco Technologies AP200M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

M 300Mbps, Outdoor Network Video Bridge w/DIP

function

Thank you for your choice of Speco Technologies’ point-to-point AP. These units are designed AP200M or AP300M

and manufactured to provide an efficient way to connect from two to five networking points directly and securely

at a distance of up to 7000’ line of site.

INCLUDED IN PACKAGE:

 (1) AP dish

 (1) Mount Assembly

 (1) PoE Power Adapter

 (1) AC Cord

 (1) Package Mounting Hardware

OPERATING INSTRUCTIONS:

1) You will need two Cat5 cables for each dish to complete assembly

2) The PoE power adapter has 3 inputs. One is for the AC cord, and two are for networking. Please note the

PoE adapter and power cord are not designed for outdoor use and should be used indoors only.

a. The bottom of the adapter has two RJ45 connections. One marked POE and one marked LAN.

b. Using one Cat5 cable, connect one end to “LAN” and the

other end to your camera, recorder, PC, etc.

c. Use the other Cat5 cable to connect your AP dish to the

POE input.

3) Antennas should be mounted level with each other, and

transmission distance is greatly reduced if line of site is not clear

4) Antenna should always be mounted upright (RJ45 ports facing down) with port cover connected to ensure

maximum weather resistance.

5) Both RJ45 ports (black and yellow) on antenna are LAN connections.

6) DIP switch instructions:

Toggle 1 changes the mode of the dish. UP is access point (AP) mode for use with your recorder,

PC, etc.. DOWN is for use with your camera.

Toggles 2 through 6 are for matching AP dishes together. There are 32 various combinations

that can be made from the 5 keys, which corresponds to 32 different SSIDs and 32 different

segments. The chart below shows all possible combinations.

Toggles 7 & 8 are for point to multi-point functionality. To use up to 4 cameras with one

recorder, configure the DIP switches as follows:

1) On the recorder/PC/Switch side, switches 7 and 8 should remain up.

2) On the camera side, select one of 4 configurations for switches 7 and 8:

a. Camera 1: 7 Up and 8 Up

b. Camera 2: 7 Up and 8 Down

c. Camera 3: 7 Down and 8 Up

d. Camera 4: 7 Down and 8 Down

3) You cannot duplicate the switch settings between Cameras for switches 7 & 8 or you will

experience interference, thus the max of 4 points.

4) Each dish has a reception angle of 30 degrees horizontal and 60 degrees vertical.

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Wifi repeater
Model:	AP200M

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies AP200M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Wifi repeater Speco Technologies Manualer

Speco Technologies AP200M Manual

6 August 2024

Speco Technologies AP300M Manual

6 August 2024

Wifi repeater Manualer

Nyeste Wifi repeater Manualer

SIIG JU-EX0311-S1 Manual

8 Juni 2025

Cudy RE3600 Manual

6 Juni 2025

Evga 100-2W-0027-LR Manual

29 Marts 2025

Evga 100-2W-0028-LR Manual

29 Marts 2025

Strong Repeater 300 V2 Manual

31 Januar 2025

Paxton 477-901-US Manual

29 Januar 2025

Paxton Net2Air Bridge Manual

29 Januar 2025

D-Link E30 Manual

23 Januar 2025

Manhattan 525664 Manual

12 Januar 2025

D-Link DMG-112A Manual

5 Januar 2025