Speco Technologies CLTPX1 Manual

Speco Technologies Ikke kategoriseret CLTPX1

Læs gratis den danske manual til Speco Technologies CLTPX1 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Speco Technologies CLTPX1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

CLTPX1/CLTPX2

specotech.com | 1.800.645.5516

Quick Installation Guide

1. Use the appropriate hardware for your mounting location. This product includes masonry anchors that may not

be appropriate for your mounting application.

2. Vertical installation only! Do not install in windy areas, maximum weight capacity is 22lbs.

3. Select the correct Masonry Drill-Bit to suit the Anchor Bolts supplied: [ M6-Ø10mm ] or [ M8-Ø12mm ] and drill

the hole.

4. Insert the Anchor Bolt & Sleeve assembly into the hole (the Nut & Washer at this point should be loosely tted).

5. Remove the Nut & Washer, mount the (Mounting base) onto the exposed Bolt & Tighten “Clockwise” with the

Nut & Washer until the Bracket is rmly in place. If there are not enough threads showing, the bolt may need to

be anchored without the base rst to expose more threads.

6. After mounting the base, snake any cables through the shaft assembly, and tighten upper shaft to the mounting

base. Then tighten the set base set screw.

7. Extend the lower shaft to desired length. The extension collar may need to be loosened by turning it

counterclockwise.

8. Once desired length is set, tighten the extension collar to the point where the lower shaft is set rmly in place

and does not move (needs to support the max weight of 22lbs). Tighten the extension collar set screws to lock

it in place.

9. Ensure that the camera mount is attached rmly to the lower shaft, then tighten the lower shaft set screw.

10. Connect the safety tether of your PTZ camera (if supplied) to the eye of the camera mount. Install the PTZ to

the camera mount and tighten the camera set screws.

Instructions:

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Ikke kategoriseret
Model:	CLTPX1

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies CLTPX1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Speco Technologies Manualer

Speco Technologies CLTPX1 Manual

28 Januar 2025

Speco Technologies SB21M Manual

27 December 2024

Speco Technologies SB11M Manual

27 December 2024

Speco Technologies V5B3M Manual

18 September 2024

Speco Technologies APCR620L Manual

18 September 2024

Speco Technologies V5T3 Manual

18 September 2024

Speco Technologies SB01M Manual

18 September 2024

Speco Technologies V5T3M Manual

18 September 2024

Speco Technologies O8LMST1 Manual

18 September 2024

Speco Technologies APCR640L Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 300004 Manual

16 Juni 2025

Playtive IAN 321241 Manual

16 Juni 2025

Cleveland 24CEA10 Manual

16 Juni 2025

Hughes & Kettner Redbox Pro Manual

16 Juni 2025

Playtive IAN 279576 Manual

16 Juni 2025

Playtive IAN 321903 Manual

16 Juni 2025

Wahoo RPM Cadence Manual

16 Juni 2025

Playtive IAN 359564 Manual

16 Juni 2025

Playtive IAN 272426 Manual

16 Juni 2025

Playtive IAN 321236 Manual

16 Juni 2025