Speco Technologies H4FD1M Manual

Speco Technologies Kamera H4FD1M

Læs gratis den danske manual til Speco Technologies H4FD1M (2 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Speco Technologies H4FD1M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HD Dome Camera- 4 ® OTVI MP FIT utdoor

QUICK INSTALLATION GUIDE

u Special features

! Sony 1/2.8 inch 5MP Starvis Sensor 4/

! Motorized Zoom & Focus Control

! Supports image resolution x 1 20fps) up to 2592 944P (

! Dynamic Range (WDR / Wide 30p)

! Coaxial communication

! 2D & 3D noise reduction

! Smart IR

! 30M IR Beam Distance

! SENS- (Digital Slow Shutter) UP

! Polygon privacy mask

! Motion detection

D C ! EAR USTOMERS

By selecting this product, you have decided to use a professional device that

guarantees highest quality and reliability. We would like to thank you very much for

your confidence and kindly ask you to read the following instructions carefully before

installation and operation in order to take full advantage of all quality features

regarding this product.

INFORMATION

This equipment has been tested and found to comply with limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

WARNING

Changes or modifications not expressly approved by the manufacturer could void

the user’s authority to operate the equipment.

CAUTION – To prevent electric shock and risk of the fire hazards

! Do NOT use power source other than that specified.

! Do NOT expose this appliance to rain or moisture.

1. Precautions

! Please read the manual carefully before the installation in order to make use the

camera to be set up correctly and to have the best picture quality.

! Please keep the manual in good condition for your future reference and service

application.

! Installation and services should only be carried out by an authorized personnel

according to local safety regulations.

! If any liquid or solid matter gets into the housing, immediately disconnect the camera

from power supply and have it checked by your authorized dealer before reusing.

! Avoid installing the camera at extremely hot or cold places.

! If you are not a certified person, never try to dismantle the camera.

To avoid electric shock, never remove the screws or covers. There are no parts inside

that need maintenance by the user. All maintenance should be carried out by qualified

personnel.

! Avoid installing the camera at a place of high humidity.

! Avoid installing the camera at the place exposed to gas or oil.

! Keep the top glass of the lens always clean in order to obtain the best picture quality

all the time. Be careful not to be stained by fingerprint.

! Don't face the camera directly toward sunlight or sunlight reflecting area.

CMOS may go defective at this condition.

! Please give a special attention to keep the unit from dangerous drop or external shock

during the process of transportation or handling.

! Never try to touch the camera in wet hand. It may cause an electric shock.

! Do not expose the camera to radioactivity. It causes a serious damage on the CMOS.

2. Limitation of liability

This publication is provided “AS IS” without warranty of any kind, either express or

implied, including but not limited to, the implied warranties of merchantability, fitness for

any particular purpose, or non-infringement of the third party's right.

This publication could include technical inaccuracies or typographical errors.

Changes are added to the information herein, at any time, for the improvemen of this ts

publication and / or the corresponding product(s).

3. Disclaimer of warranty

In no event shall seller be liable to any party or any person, except for replacement or

reasonable maintenance of the product, for the cases, including but not limi : ted to below

(1) Any damage and loss, including without limitation, direct or indirect, special,

consequential or exemplary, arising out of or relating to the product.

(2) Personal injury or any damage caused by inappropriate use or negligent operation of

the user.

(3) Unauthorized disassemble, repair or modification of the product by the user.

(4) Inconvenience or any loss arising when images are not displayed, due to any reason

or cause including any failure or problem of the product.

(5) Any problem, consequential inconvenience, or loss or damage, arising out of the

system combined by the devices of third party.

(6) Any claim or action for damages, brought by any person or organization being

photogenic subject, due to violation of privacy with the result of that surveillance-

camera's picture, including saved data, for some reason, becomes public or is used

for the purpose other than surveillance.

4. Package

- Junction Box

5. Installation

5-1 3- . Axis Adjustment

5-2 . How to install on the Ceiling

① Paste a Drilling Template on the ceiling or wall and drill screw points which will be dome

for installation.

② Fix the Surface Mounting Base by using Tapping Screws provided.

③ Fix the Flush mount Base on Surface Mounting Base.

④ Turn the camera Ass’y to the desired direction.

⑤ Turn the dome and shied cover to the camera direction.

⑥ Fix the Dome Cover Ass’y to the Flush mount Base by using Screw and L-Wrench.

The lighting flash with an arrowhead symbol, within an equilateral triangle

is intended to alert the user to the presence of non-insulated dangerous

voltage within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

This installation should be made by a qualified service person and should conform to

all local codes.

CAUTION

TO REDUCE THE RISK OF ELECTRLC SHOCK,

DO NOT REMOVE THE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRLC

SHOCK

DO NOT OPEN

CAUTION

H4FD1M

BNC Female For CVBS

BNC Female For TVI

Ceiling Tile

Drilling template

Plastic Anchor (3EA)

Tapping Screw

Ø 4 x (3EA)1.18in

Dome Cover

Ass'y

L-Wrench

Camera Ass'y

DC Power Jack

Tilt 85˚

Rotate

180˚

Pan 3 ˚ 45

ø -free 3-Axis mounting mechanism Tool

Perfect Tri-axis!

! Panning axis up to 3 ° degree. 45

! Tilting axis up to 85° degree.

! Rotation axis up to ° degree. 180

No need to use a tool for adjustment!

All adjustments are done quick and

easy by hand!

! Defog

! Surge Protect (DC 2KV / V 3KV) ideo

! -free 3-Axis Tool

! IP67 Weatherproof

! 12VDC / 24VAC Dual Input

Camera x 1

Manual x 1

L-Wrench x 1

Tapping screws x 3

Plastic anchor x 3

Drilling template x 1

Tapping Screws

(Ø4 x ) x 4 1.18in

Plastic Anchor x 4

Silicone

Template x 1

Junction Box x 1

Machine Screw PH

(M4 x ) x 3 0.47in

Chameleon

Cover x 1

Cable DC

Jack x 1

Cable BNC

Jack x 1

Desi Pak x 1

Ferrite Core x 1

5. Installation

# Junction Box

5-3 . Application of TVI output

6. Function and operation

6- ( 1. On Screen Display UTC Only)

PRESET MENU

INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY / ELEVATOR

SETUP

LENS

MANUAL

EXPOSURE

BRIGHTNESS

SHUTTER

INTENSIFY

AGC

RETURN

WHITE BAL

AUTO

AWB

AWC SET-

MANUAL

BACKLIGHT

WDR

BLC

HLC

OFF

DAY&NIGHT

COLOR

B/W

AUTO

DNR

LOW

MIDDLE

HIGH

RETURN

IMAGE

SHARPNESS

ACE

GAMMA

D EFOG

COLOR GAIN

RETURN

MIRROR

FLIP

MOTION

OFF

SYSTEM

ANALOG HD

COLOR BAR

RESET

FRAME RATE

LANGUAGE

RETURN

FREQ

CAM TITLE

IMAGE RANGE

CAM TITLE

COLOR SPACE

HEATER

EXIT

7 . Troubleshooting

If there are problems in operating, please refer to the checklist below.

If the problem persists, please contact the agent where this product is purchased.

8 ) . inDimension (

# C eiling

# _Ceiling Junction Box

9 . Specifications

MODEL

H4FD1M

Image sensor

Sony 1/2.8 inch 5MP Starvis Sensor

H. Resolution

More than 1400 TVL

Total Pixel

2704 2104 69(H) x (V) 5. Megapixel

Effective Pixels

2616 1964 14(H) x (V) 5. Megapixel

Scanning system

Progressive scan

Video output

1080p 25/30, 1440p 25/30, 1944p 20

Output

TVI / CVBS Concurrent O utput

S/N ratio

More than 52dB (AGC OFF / Weight ON)

Privacy Mask

ON / OFF (16 zone)

M Detection otion

ON / OFF (4 zone)

NEG.Image

ON / OFF

Mirror

MIRROR / V- FLIP

Min. Illumination

0Lux

White Balance

AUTO / AUTO ext / PRESET / MANUAL

Shutter Speed

AUTO / MANUAL / FLICKER

Sens- up

AUTO / OFF (Selectable Limit p2-x2 ~ x32)

Backlight

OFF / HLC / BLC / WDR

Smart IR

0 ~ 20 (Level adjustable)

2D 3DNR /

OFF / LOW / MIDDLE / HIGH

Gain Control

0 ~ 10 (Level adjustable)

Day & Night

AUTO / B&W / AGC / AGC+IR COLOR /

Sharpness

0 ~ 10 (Level adjustable)

WDR

NORMAL / ROI

L Shading ens

ON / OFF

D efog

ON / OFF

Language

ENG, CHN, CHN(S), JPN, KOR

Lens

2.7 ~ 12mm DC Iris Varifocal MFZ Lens

IR Distance

100 ft

Power Source

12VDC / 24VDC

Operating

Temperature

- F ~ 1 F 40 40

Storage

Temperature

-40F ~ 1 F 40

Operating Humidity

0%RH ~ 90%RH

Measurement( ) in

Ø130 Ø130 x / Junction Box : 3.89 x 5.7

Weight(Approx. ) lbs

2 .62lbs

ø Speci cations are subject to change without prior notice for better improvement. fi

Problems

Troubleshooting

Nothing appears on

the screen.

! Please check that the power cord and line connection

between the camera and monitor are fixed properly.

! Please check that you have properly connected V cable to ideo

the camera V output jack. ideo

The dim image

on the screen.

! Is lens stained with dirt? Clean your lens with soft, clean cloth.

! Set the monitor to proper condition.

! If the camera is exposed to too strong light, change the

camera position.

! Please check if the power supply is within the specification &

cables.(Dual Voltage ed will drop with distance and gauges, L

light poor)

The dark image

on the screen.

! Adjust the contrast feature of the monitor.

! If there is an intermediate device, set the 75Ω / Hi-Z properly.

(Please check the impedance)

The camera is not

working properly,

and the body of the

camera is hot.

! Please check if the power supply is regulated and is within the

standard requirement of the products.

Color is not correct.

! Please check the setting of White Balance setup.

The screen is

flickering.

! Please check if the camera is facing directly towards sunlight

or fluorescent light.

Coaxial

5C / 3C

TVI DVR

Monitor

Ceiling Tile

Drilling Template

(Silicone)

Plastic Anchor (4EA)

Junction box

Tapping Screw Ø4 x 4EA)1.18in (

Camera Ass'y

L-Wrench

Top cover Ass'y

20220708_SPECO_TVI

Machine Screw PH

M4 x 3EA) 0.47in (

Federal Communications Commission (FCC) Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

FCC Responsible Party :

Speco Technologies

200 New Highway

Amityville, NY 11701

www.specotech.com

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Kamera
Model:	H4FD1M

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies H4FD1M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Speco Technologies Manualer

Speco Technologies HFB4M Manual

13 August 2024

Speco Technologies H4FD1M Manual

13 August 2024

Speco Technologies VLD6M Manual

13 August 2024

Speco Technologies HTINT59K1 Manual

12 August 2024

Speco Technologies V5D1M Manual

11 August 2024

Speco Technologies V5B1 Manual

11 August 2024

Speco Technologies H2LT1 Manual

11 August 2024

Speco Technologies V5T1 Manual

11 August 2024

Speco Technologies HT7250TM Manual

10 August 2024

Speco Technologies V5B1M Manual

7 August 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB C22 Manual

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025

Aida HD-NDI-X20 Manual

27 Marts 2025

Marshall Electronics CV228 Manual

12 Marts 2025

AViPAS AV-1180 Manual

12 Marts 2025

Fujifilm FinePix JX500 Manual

14 Januar 2025

Canon WFT-E9 Manual

13 Januar 2025