Speco Technologies O2DB1 Manual

Speco Technologies Ikke kategoriseret O2DB1

Læs gratis den danske manual til Speco Technologies O2DB1 (57 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Speco Technologies O2DB1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/57

Video Doorbell

User Manual

O2DB1

Please read this manual carefully before operating the unit and keep it for further reference

Important Safeguards and Warnings

1. Electrical safety

All installation and operation here should conform to local electrical safety codes.

Use a certified/listed 12VDC Class2 power supply only.

Please note: Do not connect two power-supplying sources to the device at the same time; it may result in device damage! The

product must be grounded to reduce the risk of electric shock.

Improper handling and/or installation could run the risk of fire or electrical shock.

2. Environment

Do not expose the unit to heavy stress, violent vibration, or long-term exposure to water and humidity during transportation,

storage, and/or installation.

Do not install near sources of heat.

Only install the product in environments inside the specification operating temperature and humidity range.

Do not install the camera near power lines, radar equipment, or other electromagnetic radiation.

Do not block any ventilation openings if any.

Use all the weatherproofing hardware requirements to minimize weather intrusion.

3. Operation and Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any maintenance work.

Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.

Always use a dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of neutral

detergent. Finally, use a dry cloth to clean the device.

Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning (such as using cloth) may

result in poor IR functionality and/or IR reflection.

The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.

The dome cover is an optical device, please do not touch or wipe the cover surface directly during installation and use, please

refer to the following methods if dirt is found.

Stained with dirt:

Use an oil-free soft brush or hair dryer to remove it gently.

Stained with grease or fingerprint.

Use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center outward. Change the cloth and

wipe it several times if it is not clean enough.

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Ikke kategoriseret
Model:	O2DB1

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies O2DB1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Speco Technologies Manualer

Speco Technologies O2DB1 Manual

21 Juli 2025

Speco Technologies SB16S Manual

9 Juli 2025

Speco Technologies SXU24VKIT Manual

18 Marts 2025

Speco Technologies CLTPX1 Manual

28 Januar 2025

Speco Technologies SB21M Manual

27 December 2024

Speco Technologies SB11M Manual

27 December 2024

Speco Technologies V5B3M Manual

18 September 2024

Speco Technologies APCR620L Manual

18 September 2024

Speco Technologies V5T3 Manual

18 September 2024

Speco Technologies SB01M Manual

18 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yamazen EMMC-80 Manual

21 Juli 2025

Alpine TDA-7556 Manual

21 Juli 2025

JBL GTX47 Manual

21 Juli 2025

AZZA Pyramid 240 Manual

21 Juli 2025

Hawk-Woods MXB-880 Manual

21 Juli 2025

Yamazen GDB-1002 Manual

21 Juli 2025

Yamazen GDC-021AT Manual

21 Juli 2025

Yamazen YDG-180 Manual

21 Juli 2025

Yamazen YPD-626A Manual

21 Juli 2025

D-Link DHP-1321 Manual

21 Juli 2025