Speco Technologies PVM10 Manual


Læs gratis den danske manual til Speco Technologies PVM10 (18 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Speco Technologies PVM10, eller vil du spørge andre brugere om produktet?

Side 1/18
SPECO PVM10 Manual
User Manual
PVM10
Public View Monitor
with built-in IP
Camera
Please read this manual carefully before operang the unit and keep it for
further reference
SPECO PVM10 Manual
Important Safeguards and Warnings
. Electrical safety
All installaon and operaon here should conform to local electrical safety codes.
Use a cered/listed 12VDC 2A Class2 power adapter (not included) or adequate PoE
switch.
Improper handling and/or installaon could run the risk of re or electrical shock.
. Environment
Do not expose the unit to heavy stress, violent vibraon or long term exposure to water-
and humidity during transportation, storage, and/or installaon.
Do not install near sources of heat. Only install the product in environments inside the
specicaon operang temperature and humidity range.
Do not install the PVM near power lines, radar equipment or other electromagnec
radiaon.
Do not block any venlaon openings if any.
. Operaon and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any
maintenance work.
Always use the dry so cloth to clean the device. If there is too much dust, use a cloth
dampened with a small quanty of neutral detergent. Finally use the dry cloth to clean the
device.
Stained with dirt:
Use oil free so brush or hair dryer to remove it gently.-
Stained with grease or ngerprint.
Use oil free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens -
center outward. Change the cloth and wipe several mes if it is not clean enough.


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: overvåge
Model: PVM10

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies PVM10 stil et spørgsmål nedenfor, og andre brugere vil svare dig