Speco Technologies PVMMT75 Manual


Læs gratis den danske manual til Speco Technologies PVMMT75 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Speco Technologies PVMMT75, eller vil du spørge andre brugere om produktet?

Side 1/2
PVMMT75 Clamp-on Mount Installaon Manual
Nong: This mount is only for VESA 75x75mm PVM/Monitors
Cauon: Max Load Weight 6KG
Accessory List
Solid Wrench x1
Hexagonal Wrench x1
33-57mm Stainless Clamp x2
65-89mm Stainless Clamp x2
M6x90 Screw x2
Cushion for M6x90 Screw x2
Cap for M6x90 Screw x2
Metal Transfer Plate x1
M6x12 Screw for Transfer Plate x2
Installation
1) Aach the plate base to the pipe or tube, then use stainless clamp to x.
2) For added security to the clamps, you can install 2pcsalso
M6x90 screws to x.(Please use cushion and cap to x with M6x90 screw)
65-89mm Clamp
3) Use M4x8 screws to install the PVM with the VESA 75x75mm plate; and you can
adjust the mounng ang /length as below by loosening the xing screw.le
4) Aach the whole mount bracket to the plate base, and then use M6x12 screws to
lock the bracket and plate base.
5) In applicaons, you will need to usevertical mounting metal transfer plate. Then mount as
above.


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Ikke kategoriseret
Model: PVMMT75

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies PVMMT75 stil et spørgsmål nedenfor, og andre brugere vil svare dig