Speco Technologies VGA135 Manual


Læs gratis den danske manual til Speco Technologies VGA135 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Speco Technologies VGA135, eller vil du spørge andre brugere om produktet?

Side 1/4
1
VGA135 VGA CAT5 Extender
Thank you for your purchase of the VGA135 VGA CAT5 extender. This VGA Extender allows VGA video signals to transmit up to
328’ (100m) via 4 pairs of CAT5 STP or UTP cable. The VGA135 can be used in a home or commercial application as a smart,
fast, and cost-effective alternative as it replaces costly and bulky VGA cable. VGA135 is ideal for classroom video distribution,
lecture halls, retail kiosks, video information displays, overhead projector systems, PC-training systems, and tradeshows.
FEATURES
Passive device, no power required.
Includes transmitter and receiver.
Resolution up to 1920x1080 pixels.
Up to 328’ (100m) via standard 4 pairs CAT5 STP or UTP cable
Replaces costly VGA cable with less expensive UTP cable.
Transmitter has built in virtual DDC to avoid improper settings of resolution and frequency.
Transmitter has built in sync mode selection for signal stability.
Receiver has built in sync filter level adjustment for signal stability.
UNIT VIEW
Transmitter
Receiver
INSTALLATION
2
TRANSMISSION DISTANCE CHART
RECOMMENDED CABLE
1. CAT5e UTP/STP or CAT6 UTP cable.
2. There are some monitor models with very high sync-sensitive demand. For these units, its recommended to use STP
(shielding twisted pair) cable instead of UTP (unshielded twisted pair).
RJ45 PINOUT
(PIN TIA/EIA-568B)
TIPS FOR USING STP CABLE
1. STP (shielding twisted pair) Cable.
2. STP (shielding) RJ45 connector with STP cable connection.
SYNC MODE SELECT SWITCH
Mode 1
Mode 2
1. For “newer” monitors, such as LCD monitors over 17”, it is recommended using Mode 1 for the best transmission
stability. If the picture is not normal, please switch to Mode 2.
2. For “older” monitors, such as CRT or LCD monitors under 17”, it is recommended using Mode 2 and adjusting the Sync
Filter Level at the receiver. If the picture is not normal after following above suggestion, please change UTP to STP
(shielding twisted pair) cable.
Max. Distance via CAT5e Cable
800x600 pixels (60Hz) 328’ (100M)
1024x768 pixels (60Hz) 246’ (75M)
1280x1024 pixels (60Hz) 196’ (60M)
1920x1080 pixels(60Hz) 131’ (40M)
(PIN TIA/EIA-568B)
PIN Wire Color
1 Orange-white Red +
2 Orange Red -
3 Green-white H-Sync
4 Blue Green +
5 Blue-white Green -
6 Green V-Sync
7 Brown-white Blue +
8 Brown Blue -


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Ikke kategoriseret
Model: VGA135

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies VGA135 stil et spørgsmål nedenfor, og andre brugere vil svare dig