SSV Works BR-B65 Manual

SSV Works Højttaler BR-B65

Læs gratis den danske manual til SSV Works BR-B65 (3 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 64 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 32.5 anmeldelser. Har du et spørgsmål om SSV Works BR-B65, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

BR-B65

2021+ Ford Bronco

6.5” Rear Speaker-Pod Add-Ons

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030

www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751

Please read and understand these

instructions completely before

installation to avoid possible injury, or

damage to the accessory or vehicle.

WARRANTY INFORMATION:

All SSV Works enclosures are covered by a limited lifetime warranty against defects

in material or workmanship. All SSV Works Electronics are covered by a limited 1 year

warranty against defects in material or workmanship. All SSV Works Speakers are

covered by a limited 1 year warranty against defects in material or workmanship. Labor

for replacement of defective components is not covered. Contact SSV Works for further

warranty information.

1. BR-B65U Enclosures (1 pair)

2. T-25 Torx Screws x 4

(Factory Screws)

TOOLS NEEDED FOR INSTALLATION PARTS LIST

PARTS LIST IMAGES

3. Phillips Screw x 2

4. M6 Screws

and Washers x 2

2. T-25 Torx Screws p1-x4

(Factory Provided)

1. BR-B65-U Enclosures

(1 pair)

3. Phillips Screw x 2 4. M6 Screws and

Washers x 2

- #1 Phillips Screwdriver - T-25 Torx bit

- T-30 Torx bit

B. Remove the 3rd screw located at the bottom of the speaker

pod bolting the pod to the frame.

BR-B65

A. Remove the two screws securing the top mounting bracket

to the factory speaker pod. These are hard to remove with a

hardtop we recommend using an angle driver.

Note: These two screws will be re-used for the SSV pods.

DISASSEMBLY

C. Use the provided Philips screw to secure the cover in place. D. Loosely assemble the bottom of the pod to the frame of the

vehicle using the provided M6 screw and washer.

B. Snap the speaker pod harness cover onto the pod making

sure the harness exits the cover through one of the two reliefs.

C D

A. Hold the pod up near its mounting location and connect the

pod to the factory harness.

INSTALLATION

Produkt Specifikationer

Mærke:	SSV Works
Kategori:	Højttaler
Model:	BR-B65

Har du brug for hjælp?

Hvis du har brug for hjælp til SSV Works BR-B65 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler SSV Works Manualer

SSV Works BR-2B65U Manual

24 August 2024

SSV Works BR-B65 Manual

24 August 2024

SSV Works WP-RZO + 2 Manual

24 August 2024

SSV Works RG4-SB10 Manual

24 August 2024

SSV Works BR-2B65A Manual

24 August 2024

SSV Works X3-US10 Manual

24 August 2024

SSV Works US2-C65 Manual

24 August 2024

SSV Works RZ4-3KRC Manual

24 August 2024

SSV Works RG4-F65K Manual

24 August 2024

SSV Works RZ3-1KRC Manual

24 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025

Valcom InformaCast VIP-428A-IC Manual

30 Juli 2025

Valcom InformaCast VIP-431A-IC Manual

30 Juli 2025

Electro-Voice Evid 4.2T Manual

30 Juli 2025

Audiocase S10 Manual

30 Juli 2025

JLab JBuds Party Manual

30 Juli 2025