SSV Works X3-F4 Manual


Læs gratis den danske manual til SSV Works X3-F4 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om SSV Works X3-F4, eller vil du spørge andre brugere om produktet?

Side 1/4
X3-F4
2017+ Can-Am Maverick p1-x3 & p1-x3 Ma
4” Speaker Dash Pods
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
1. X3-F4 Enclosures (1 pair)
2. Acoustic Lens (1 pair)
3. M6 x 1.0 Screws x 4
TOOLS NEEDED FOR INSTALLATION PARTS LIST
PARTS LIST IMAGES
4. M6 x 25mm Screws x 2
5. M6 Washers x 6
6. 10mm Nut x 2
3. M6 x 1.0 Screws x 4
4. M6 x 25mm Screws x 2
2. Acoustic Lens (1 pair)
1. X3-F4 Enclosures
(1 pair)
5. M6 Washers x 6 6. 10mm Nut x 2
- T-30 Torx Driver
- Drill 1/4” Drill bit
- 10mm Wrench or Rachet
- Utility Knife
C. Using a utility knife, cut off the 4 tabs ush to the panel
D. Drill a hole using a 1/4” drill bit at the factory dimple marks (as shown above) on the outside dash panel around the speaker grille.
B. Pry off the 4 clips on the base under the empty space for the
speaker
X3-F4
C1 C2
D2D1
B
A. Remove the top dash panels on the driver (7 screws with 2
clips) and passenger side (5 screws with 2 clips).
A


Produkt Specifikationer

Mærke: SSV Works
Kategori: Højttaler
Model: X3-F4

Har du brug for hjælp?

Hvis du har brug for hjælp til SSV Works X3-F4 stil et spørgsmål nedenfor, og andre brugere vil svare dig